Home > Thermos Grill Models > Thermos 24433
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Thermos grill.
Replacement BBQ grill parts for Thermos model: 24433
24433 Cooking Grids
Premium stainless steel cooking grids. Set of two (2) grids. Far superior to porcelain coated steel grids.
- Made in USA
- Commercial grade 304 stainless steel
- .225” solid stainless rods
- Sold as a set of two (2) panels
Each panel measures:- Front-to-Back: 14 1/2”
- Side-to-Side: 10 1/2”
Total Side-to-Side: 21”Part Number: 51702-SS-X2
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 21”
Material: stainless steel
Weight: 5.6
$85.76
Premium stainless steel cooking grid. Far superior to porcelain coated steel grids. SOLD INDIVIDUALLY.
- Made in USA
- Commercial grade 304 stainless steel
- .225” solid stainless rods
- Sold individually
Part Number: 51702-SS
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 10 1/2”
Material: stainless steel
Weight: 2.8
$46.47
Premium stainless steel cooking grids. Set of two (2) grids. Far superior to porcelain coated steel grids. Fits ProChef grills, may fit others.
- Made in USA
- Commercial grade 304 stainless steel
- .225” solid stainless rods
- Sold as a set of two (2).
Each panel measures:- Front-to-Back: 14 1/2”
- Side-to-Side: 10 1/2”
Total Side-to-Side: 21”Part Number: 54402-SS-X2
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 21”
Material: stainless steel
Weight: 5.6
$85.76
Premium quality stainless steel
cooking grid. Far superior to the porcelain coated steel grids it replaces.
- Made in USA
- 304 commercial grade stainless steel
- Solid .225 diameter stainless rods
- Sold individually
Fits grills made by ProChef. May fit others.
Part Number: 54402-SS
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 10 1/2”
Material: stainless steel
Weight: 2.80
$46.47
24433 Rock Grates
Carbon steel
rock grate for Thermos model 24433.
Part Number: 90501
Dimensions: 11 1/8” x 17 1/4”
Material: steel wire
Weight: 2.13
$27.98
24433 Warming Racks
Universal warming rack. For use on grills with at least 22” inside dimension.
Part Number: AP-6A
Dimensions: 6” x 21 1/2”
Material: Chrome steel
Weight: 1.3
$23.33
24433 Valves, Orifices, and Manifolds
Brass
spud orifice with 5/16” x 32 thread size. Has #70
starter hole. Must be drilled to proper
drill size.
If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.
Part Number: 31600
Dimensions: 0 3/8” x 0 7/16”
Material: brass
Weight: 0.01
$7.54
Dual brass LP valve assembly. Includes left and right control valves and valve manifold. Fits Arkla up-front control grills and others requiring 45 degree angle valves.
- For use with LP gas
- Includes two orifices drilled to #57 drill size
- Includes pre-assembled 45 degree angle fitting, not shown in photo
Made in USA Part Number: VLV-28
Material: brass
Weight: 1.1
$52.75
24433 Accessories
Durable 2 5/16” round briquettes
- Self-cleaning
- Control flare-ups while holding an even heat pattern.
- About 53 pieces, covers approximately 275 sq. inches.
- Fits all gas grills
Part Number: BQ-5
Weight: 7.2
$31.19
Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.
Part Number: 45887
Material: pummise
Weight: 7.0
$24.48
Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.
Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90
$25.40
Ceramic briquettes for Lynx and Dynasty Grills with 28 briquettes per box.
Part Number: BQLYX
Dimensions: 2” x 2”
Material: ceramic
Weight: 4.0
$48.17
16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
$16.59
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Cast aluminum griddle
Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0
$27.83
deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.
Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7
$25.57