Home > Sterling Grill Models > Sterling 565064
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Sterling grill.
Replacement grill parts for Sterling model: 565064
565064 Burners
Genuine OEM Sterling stainless steel burner replaces original part number 52904-144 (52904-144LP and 52904-144NG). For LP grills, adjust air shutter to about 1/3 opened and for NG adjust about 2/3 open or more as needed.
Part Number: 52924-144
Dimensions: 15 3/4
Material: stainless steel
Weight: 0.8
$20.15
Genuine OEM Sterling Side Burner. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).
Part Number: 10390-E10
Weight: 0.4
$14.96
565064 Cooking Grids
COOKING GRID CAST IRON 330/440/550 (Sold individually; number required varies, check your grill.)
Part Number: 52002-181
Dimension Front-to-Back: 17 3/8
Dimension Side-to-Side: 12 3/4
Material: cast iron
Weight: 6.75
Image not available
$43.13
565064 FLAV-R-WAVE
Genuine OEM Sterling stainless steel Flav-R-Wave for Sterling model 565064.
Part Number: 52209-404
Dimension Front-to-Back: 15 7/8
Dimension Side-to-Side: 6
Material: stainless steel
Weight: 1.14
$21.93
565064 Igniter Components
Genuine stainless steel two piece collector box assembly. Consists of both upper and lower pieces.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 52225-014A
Dimensions: 23
Material: stainless steel
Weight: 1.0
$28.25
Genuine OEM Sterling electrode with 11 connector wire that has a flat/spade female end; use with AA or AAA battery powered ignitors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive early Aug.
Part Number: 10342-E12
Weight: 0.05
$3.70
Genuine OEM Sterling electronic push-button 3-spade igniter.
- Uses AAA battery (not included)
- .Requires 3/4 mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-246
Weight: 0.6
$18.48
Genuine OEM Sterling 32 wire for side burner and other applications. Both ends are female
spade connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-T18
Dimensions: 32
Weight: 0.05
$4.42
565064 Grease Trays
Grease tray 440; porcelain flatte matte finish for Sterling model 565064.
Part Number: 57055-901
Dimensions: 6 3/4 x 25 7/16
Material: porcelain steel
Weight: 1.25
$27.24
GREASE PAN - 330/440/550 for Sterling model 565064.
Part Number: 52009-901
Dimensions: 5 1/8 x 6 1/2
Weight: .40
$15.11
Genuine OEM Sterling Porcelain Grease Pan for Sterling model 565064.
Part Number: 22009-901
Dimensions: 6 1/2 x 5 1/8
Weight: .45
$15.11
565064 Knobs and Handles
LID-HANDLE BENT 500 430 SS. NOTE: The mounting holes, center to center, are 23 1/2 apart.
Part Number: 24005-12A
Dimensions: 25
Weight: .85
$25.86
CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP for Sterling model 565064.
Part Number: 10472-K431
Weight: 0.1
$5.15
CONTROL KNOB SMALL W/BA STRIP.
- Off position D-Value: 6 o'clock
- Knob diameter: 1 7/8
- Socket diameter: 5/16
- Knob shaft: 1/2
Part Number: 10472-K231
Weight: 0.1
$5.15
565064 Regulators and Hoses
24 LP hose and regulator with
QCC-1 connection.
- For use on new style QCC-1 tanks.
- Consists of hose part# 01000 and regulator part# 00920.
- Hose end with SAE 3/8 female flare fitting connects to grill.
Note: The grill must have a matching SAE 3/8 male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8 fitting is much larger, approximately 5/8. See our
flare fitting description for information on measuring and sizes.
Part Number: 80012
Dimensions: 23 1/2 x 0 1/2
Weight: 0.80
$46.36
565064 Wheels and Castors
Wheel 6 plastic with 3/8 axle hole for Sterling model 565064.
Part Number: 10892-608
Weight: 0.2
$7.28
Wheel bolt 3.25 long; uses one hinge pin part number S21233 not included for Sterling model 565064.
Part Number: 10240-13
Weight: .10
$2.23
565064 Warming Racks
WARMING RACK 440 PORC (back support rod 25 5/8 and front support rod 26 3/16 warming rack 7 3/8 x 25) for Sterling model 565064.
Part Number: 52005-991
Dimensions: 25 5/8
Weight: 3.3
$35.16
565064 Heat indicators and Meat Thermometers
Genuine OEM Sterling Heat indicator. About 2 3/8 wide and 2 high. The threaded stem is about 5 /16 diameter and 1 1/8 long.
Part Number: 10571-6
Weight: 0.12
$17.76
565064 Miscellaneous Repair Parts
Cotter pin for Sterling model 565064.
Part Number: Y-11230
Weight: 0.01
$1.08
Hinge pin clip for Sterling model 565064.
Part Number: S21233
Weight: 0.01
$1.08
565064 Hardware
SCREW-PHCP 6-32X1/4 TY-F JS500 for Sterling model 565064.
Part Number: Y-12835
Weight: 1.0
Image not available
$0.70
LID BUMPER for Sterling model 565064.
Part Number: Y-11231
Weight: 0.01
$1.08
565064 Accessories
6 deluxe chrome plated 22” shish-ke-bab skewers with wooden handles
Part Number: 40538
Material: chrome steel
Weight: 1.1
$15.59
Deluxe 17 stainless steel turner.
- Soft comfort rubber grip
- Stainless steel blade
Part Number: 43108
Material: stainless steel
Weight: 0.10
$9.48
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$6.64
Cast aluminum griddle
Part Number: 91652
Dimensions: 19 1/2 x 10 3/4
Material: aluminum
Weight: 3.0
$27.83
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.5
$17.59