Sterling Burners
Stainless steel burner for some Sterling grills.
Part Number: 10101
Dimensions: 15 7/8” x 8”
Material: stainless steel
Weight: 2.1
$54.64
| |
|
Stainless steel burner and venturi assembly kit for some Sterling grills. Comes with all necessary gaskets and screws.
Part Number: 10101-70301
Dimensions: 15 7/8” x 8”
Material: stainless steel
Weight: 3.0
$68.15
| |
|
Stainless steel burner for some Sterling grills.
Part Number: 10201
Dimensions: 19 1/2” x 8”
Material: stainless steel
Weight: 2.5
$61.40
| |
|
Stainless steel burner and venturi assembly kit for some Sterling grills. Comes with all necessary gaskets and screws.
Part Number: 10201-70301
Dimensions: 19 1/2” x 8”
Material: stainless steel
Weight: 3.0
$74.29
| |
|
Genuine OEM Sterling Side Burner for some Sterling grills. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).
Part Number: 10390-E10
Weight: 0.4
$14.96
| |
|
Genuine OEM Sterling stainless steel Dual-Tube burner for some Sterling grills. Use air shutter to control flow of air for LP gas, less air, and for natural gas, more air. NOTE: Manufacturer changed back mounting to a 90 degree bend.
Part Number: 10390-E20
Dimensions: 14 3/8” x 1 1/4”
Material: Stainless steel
Weight: 0.75
$26.94
| |
|
Genuine OEM Sterling stainless steel burner and venturi assembly for some Sterling grills.
Part Number: 10390-T301
Dimensions: 5 1/4” x 13 7/16”
Material: Stainless steel
Weight: 1.85
$59.61
| |
|
SIDE BURNER COVER BLK for some Sterling grills.
Part Number: 10393-T401
Weight: 1.0
Image not available
$8.90
| |
|
Stainless steel H burner for some Sterling grills. Includes special bracket for optional 03900 burner-mounted collector box and electrode with wire. The 03900 electrode & box is a good solution for applications where the original OEM electrode cannot be used.
Part Number: 10502
Dimensions: 15 7/8” x 8”
Material: stainless steel
Weight: 2.5
$58.70
| |
|
Stainless steel burner and venturi assembly kit for some Sterling grills. Comes with all necessary gaskets and screws.
Part Number: 10502-70301
Dimensions: 15 7/8” x 8”
Material: stainless steel
Weight: 3.0
$85.90
| |
|
Stainless steel H burner for some Sterling grills. Includes special bracket for optional 03900 burner-mounted collector box and electrode with wire. The 03900 electrode & box is a good solution for applications where the original OEM electrode cannot be used.
Part Number: 10602
Dimensions: 19 1/2” x 8”
Material: stainless steel
Weight: 2.8
$56.54
| |
|
Stainless steel burner and venturi assembly kit for some Sterling grills. Comes with all necessary gaskets and screws.
Part Number: 10602-70301
Dimensions: 19 1/2” x 8”
Material: stainless steel
Weight: 4.0
$83.87
| |
|
Stainless steel burner for some Sterling grills. Includes mounting brackets.
Part Number: 11002
Dimensions: 19 1/2” x 8”
Material: stainless steel
Weight: 2.8
$56.54
| |
|
Stainless steel burner and venturi assembly kit for some Sterling grills. Comes with all necessary gaskets and screws.
Part Number: 11002-77902
Dimensions: 19 1/2” x 8”
Material: stainless steel
Weight: 4.5
$68.44
| |
|
Stainless steel burner for some Sterling grills.
Part Number: 18202
Dimensions: 8” x 22”
Material: stainless steel
Weight: 2.5
$61.07
| |
|
Stainless steel burner and venturi assembly kit for some Sterling grills. Comes with all necessary gaskets and screws.
Part Number: 18202-78202
Dimensions: 8” x 22”
Material: stainless steel
Weight: 3.5
$81.17
| |
|
cast iron burner head for some Sterling grills.
Part Number: 20502
Dimensions: 15 7/8” x 8”
Material: cast iron
Weight: 7.7
$64.56
| |
|
Cast iron burner and venturi assembly kit for some Sterling grills. Comes with all necessary gaskets and screws.
Part Number: 20502-70301
Dimensions: 15 7/8” x 8”
Material: cast iron
Weight: 8.0
$90.73
| |
|
Genuine OEM Sterling stainless steel burner for some Sterling grills.
Part Number: 22209-174
Dimensions: 16 3/8” x 1”
Material: Stainless steel
Weight: 0.5
$15.15 | |
|
Genuine OEM Sterling stainless steel Dual-Tube burner for some Sterling grills. This part has been slightly changed by the manufacturer to include a small bend at the end that does not affect the fit on existing grills that use this part.
Note: The
adjustable air shutter on this burner should be set to 1/3 open for LP grills, 2/3 open for natural gas grills. The burner ships with the air shutter set 1/3 open for LP grills.
This burner is the same part as 22909-104NG and 22909-104LP. There is no difference in the parts, 22909-104NG has the air shutter set to 2/3 open for natural gas, 22909-104LP has the air shutter set to 1/3 open for LP.
Part Number: 22909-104
Dimensions: 17 1/8” x 1 1/4”
Material: Stainless steel
Weight: 1.0
$34.08
| |
|
Rear burner tubular with deflector; includes collector box, electrode and connector wire for some Sterling grills.
Part Number: 27906-354
Dimensions: 32
Weight: 1.0
Image not available
$33.13
| |
|
Genuine OEM Sterling stainless steel main tube burner for some Sterling grills. For LP gas, the air shutter should be open about 1/3.
Note: This part also the factory replacement for burner 52904-E400, which has been discontinued.
Part Number: 52904-E400LP
Dimensions: 14 1/2
Material: stainless steel
Weight: 1.0
$20.15
| |
|
Genuine OEM Sterling stainless steel main tube burner for some Sterling grills. For natual gas/NG the air shutter should be open about 2/3.
Part Number: 52904-E400NG
Dimensions: 14 1/2
Weight: 1.0
$21.51
| |
|
Genuine OEM Sterling stainless steel burner replaces original part number 52904-144 (52904-144LP and 52904-144NG) for some Sterling grills. For LP grills, adjust air shutter to about 1/3 opened and for NG adjust about 2/3 open or more as needed.
Part Number: 52924-144
Dimensions: 15 3/4
Material: stainless steel
Weight: 0.8
$20.15
| |
|
Standard stainless steel burner and venturi assembly for some Sterling grills. Includes:
- One (1) ELB stainless steel H burner with adjustable legs
- One (1) V-1 single 7” straight venturi
- All necessary gaskets and screws.
Part Number: ELB+V-1
Dimensions: 7 1/4” x 19 1/4”
Material: stainless steel
Weight: 3.0
$50.80
| |
|
Standard stainless steel burner and venturi assembly for some Sterling grills. Includes:
- One (1) ELB stainless steel H burner with adjustable legs
- One (1) V-11 adjustable (5 1/2” to 8”) single straight venturi
- All necessary gaskets and screws.
Part Number: ELB+V-11
Dimensions: 7 1/4” x 19 1/4”
Material: stainless steel
Weight: 3.0
$58.26
| |
|
Standard stainless steel burner and venturi assembly for some Sterling grills. Includes:
- One (1) ESB stainless steel H burner with adjustable legs
- One (1) V-1 single 7” straight venturi
- All necessary gaskets and screws.
Part Number: ESB+V-1
Dimensions: 7 3/4” x 15 1/2”
Material: stainless steel
Weight: 2.5
$43.18
| |
|
Deluxe stainless steel single-venturi burner and venturi assembly for some Sterling grills. Includes:
- LB stainless steel H burner (venturi not included).
- Deluxe burners have a special spot-welded mounting bracket for optional IG-5B universal tongue-style collector box and electrode. The IG-5B can be used in applications where the factory ignition system is irrepairable, non existant, or otherwise unusable.
- One (1) V-1 plated steel single venturi
- Venturi gasket and mounting nuts (venturi mounts with nuts and bolts, not screws).
- 5 year MHP limited warranty.
- Click here for features of MHP deluxe SS burner.
Part Number: LB+V-1
Dimensions: 8 1/8” x 19 1/2”
Material: stainless steel
Weight: 3.0
$59.21
| |
|
Genuine OEM Sterling stainless steel burner and venturi assembly for some Sterling grills. Includes burner-mounted igniter electrode and wire part# S15500. Fully assembled.
Part Number: S10017
Dimensions: 8” x 20 1/2”
Material: Stainless steel
Weight: 3.5
$76.25
| |
|
Genuine OEM Sterling stainless steel burner and venturi assembly for some Sterling grills. Includes burner-mounted igniter electrode and wire part# S15500. Fully assembled.
Part Number: S10077
Dimensions: 8” x 16”
Material: Stainless steel
Weight: 2.5
$59.56
| |
|
Genuine OEM Sterling stainless steel rotisserie burner assembly for some Sterling grills.
Includes:- 26 3/16” SS rotisserie burner with deflector (part# S13005)
- Burner-mounted electrode, gas collector box, and 45” wire
- Completely assembled
Part Number: S13005A
Dimensions: 26 3/16”
Weight: 1.10
$34.40
| |
|
Deluxe stainless steel single-venturi burner and venturi assembly for some Sterling grills. Includes:
- SB stainless steel H burner.
- Deluxe burners have a special spot-welded mounting bracket for optional IG-5B universal tongue-style collector box and electrode. The IG-5B can be used in applications where the factory ignition system is irrepairable, non existant, or otherwise unusable.
- One (1) V-1 7” plated steel straight single venturi
- Venturi gasket and mounting nuts (venturi mounts with nuts and bolts, not screws).
- 5 year MHP limited warranty.
- Click here for features of MHP deluxe SS burner.
Part Number: SB+V-1
Dimensions: 8 1/8” x 16”
Material: stainless steel
Weight: 2.5
$55.35
| |
|
