Sterling 4588-3

Genuine OEM Sterling stainless steel burner and venturi assembly. Includes burner-mounted igniter electrode and wire part# S15500. Fully assembled.

Part Number: S10017
Dimensions: 8” x 20 1/2”
Material: Stainless steel
Weight: 3.5

Genuine OEM Sterling Side Burner. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).

Part Number: 10390-E10
Weight: 0.4

Genuine OEM Sterling stainless steel Flav-R-Wave heat plate. Also replaces porcelain-steel part# 10222-T424, which has been discontinued by the manufacturer.

Part Number: 10222-T425
Dimension Front-to-Back: 11 1/4”
Dimension Side-to-Side: 23”
Material: Stainless steel
Weight: 3.0

Radiation shield for Sterling model 4588-3.

Part Number: 10184-R80
Dimensions: 9 1/4” x 20 3/4”
Material: stainless steel
Weight: 1.72

Genuine OEM Sterling electronic push-button 2-spade igniter.

• Uses AAA battery (not included)
• .Requires 3/4” mounting hole
• Also replaces part# 10342-242 and 10342-249

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-245
Weight: 0.3

Genuine OEM Sterling collector box and electrode assembly. Includes

• burner mounted collector box (clip on)
• ceramic electrode and 18” wire with round connector and protective sleeve.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: S15500
Weight: 0.1

Genuine OEM Sterling 21” wire for side burner or other applications. One female spade connector, one female round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T14
Dimensions: 21
Weight: 0.05

Genuine OEM Sterling disposable grease pans. Package of 10. Each measures 4.75”x6”x1”.

Part Number: S15115
Dimensions: 4 3/4” x 6”
Material: aluminum
Weight: 0.25

Genuine OEM Sterling rotary igniter knob for Sterling model 4588-3.

Part Number: 10472-K40
Weight: 0.1

Triangular handle washer. 1/8 in thick. Made of heat resistant compressed material.

Part Number: 10239-7
Dimensions: 1 1/2” x 1 1/4”
Weight: 0.05

S/B LID HANDLE WAGON ENCLOSER* for Sterling model 4588-3.

Part Number: PB20-60
Weight: 1.0

HOSE SIDE BRNR W/.079 ORIFICE

Part Number: S13467-079
Weight: 1.0

HOSE CONNECTOR BARB for Sterling model 4588-3.

Part Number: S13297
Weight: 1.0

HOSE CONNECTOR NUT 3/8 for Sterling model 4588-3.

Part Number: S13299
Weight: 1.0

Genuine OEM Sterling caster wheel; approximately 2 3/8” diameter for Sterling model 4588-3.

Part Number: 10892-15
Weight: 0.35

Premium grade stainless steel warming rack. This rack made to replace part numbers S12205, S12206, and S12207, which are no longer available from the manufacturer. Made in USA

Part Number: CLA-WS0192
Dimensions: 10 1/2” x 23 1/8”
Material: stainless steel
Weight: 4.8

Genuine OEM Sterling Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.

Part Number: 10571-6
Weight: 0.12

Hinge pin clip for Sterling model 4588-3.

Part Number: S21233
Weight: 0.01

Cotter pin for Sterling model 4588-3.

Part Number: Y-11230
Weight: 0.01

REAR BURNER SPRING for Sterling model 4588-3.

Part Number: S21362
Weight: 1.0

Bolt for Sterling model 4588-3.

Part Number: Y-6616
Weight: 0.02

SCREW-PHCP 6-32X1/4 TY-F JS500 for Sterling model 4588-3.

Part Number: Y-12835
Weight: 1.0

Genuine OEM Sterling End Cap, door. Left hand side, with magnet.

Part Number: 10184-E78A
Weight: 0.36

END CAP DOOR BOTTOM LEFT A for Sterling model 4588-3.

Part Number: 10184-E76
Weight: .25

Genuine OEM Sterling End Cap, door. RIght hand side, with magnet.

Part Number: 10184-E79A
Weight: 0.36

END CAP DOOR BOTTOM RIGHT A for Sterling model 4588-3.

Part Number: 10184-E77
Weight: .25

SHELF SUPPORT LH BLK for Sterling model 4588-3.

Part Number: 10184-E461
Weight: 1.0

SHELF SB EZ-BILT W/O BRACKET for Sterling model 4588-3.

Part Number: 10711-E563
Weight: 1.0

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Material: chrome steel
Weight: 0.9

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Cast aluminum griddle

Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0

Deluxe venturi brush with 11” coil spring flexible shaft

Part Number: 77310
Weight: 0.3