Sams PS9500

47183T-02-R Stainless steel replacement tube burner for Smoke Hollow OEM # 47183T-02. Electrode sold seperately # 04010 or # IG-20B. Includes:

• SS tube burner
• Electrode mounting bracket
• Spider exclusion screen
• Adjustable air shutter

Replaces Sams factory part# 47183T-02

Part Number: 47183T-02-R
Dimensions: 18 5/16” x 1”
Material: stainless steel
Weight: 0.5

47183T-11-R Charcoal and Sear Burner Cooking Grid. Fits Smoke Hollow Pro Series grill and smoker units.

• Porcelain treated cast iron, flat matte finish
• Three (3) required for most models
• Sold individually

This part replaces original OEM part# 47183T-11.

Part Number: 47183T-11-R
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 10 11/16”
Material: matte cast iron
Weight: 3.8

47183T-12-R Gas Cooking Grid. Fits Smoke Hollow Pro Series grill and smoker units.

• Porcelain treated cast iron, flat matte finish
• Two (2) required for most models
• Sold individually

Relaces original OEM part# 47183T-12, which was a glossy porcelain grid.

Replaces Sams factory part# 47183T-12

Part Number: 47183T-12-R
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 10 11/16”
Material: matte cast iron
Weight: 3.8

Stainless steel replacement Heat Tent. Far better rust and corrosion resistance than the original porcelain steel version. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating, remove before use.

Replaces Sams factory part# 47183T-24

Part Number: 47183T-24-R
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 0.80

Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.

• Wire not included. Commonly used with wire part# 03610.
• Female spade connector on wire connects to male spade connector of electrode.
• If used with existing wire, confirm connecting end of wire is a female spade connector
• Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04010-X2, X3, X4, and X5.

Part Number: 04010
Material: ceramic
Weight: 0.05

Stainless steel charcoal drip tray (OEM TR028) and gas drip tray (OEM 47183T-30) with handle. Can be used for either purpose as a replacement, however it does not include a drip hole as in the original gas drip tray. Clean tray periodically for a longer life. Made in USA

NOTE: For model SH7000 charcoal drip tray OEM# SH7000-3, please measure & compare to your old tray to make sure this is the correct size for your model.

Replaces Sams factory part# 47183T-30

Part Number: CLA-DS0305
Dimensions: 17 7/8” x 20 1/4”
Material: stainless steel
Weight: 3.9

Round heat indicator.

• Single probe
• 3” diameter
• Requires 3/8” mounting hole

Replaces Sams factory part# TR041

Part Number: 00016
Dimensions: 3” x 3”
Weight: 0.2

10” Bamboo Skewers (100 pieces)

• Ideal for grilling meat and vegetables
• Soak skewers in water about 1/2 hour before using
• Use foods that require the same amount of cooking time. Meats can be pre-cooked. Marinated foods are recommended for added flavor.
• Great for chicken or beef, ham, lamb, or veal, salami, shrimp, or scallops, mushrooms, sliced peppers, omion, carrots, cherrytomatoes, pineapples, zuccini, and apples.

Part Number: 11060
Weight: 0.6

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Cast aluminum griddle

Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0

Replacement heads for grill brush 77600. Set of two.

Part Number: 77650
Weight: 0.3