Heat Tents for Sams grills

Stainless steel replacement Heat Tent for some Sams grills. Far better rust and corrosion resistance than the original porcelain steel version. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating, remove before use.

Part Number: 47183T-24-R
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 0.80

Stainless steel Flame Tamer heat tent for some Sams grills.

• Stainless equivalent of part 91751
• Superior to the porcelain steel originals
• Rust and corrosion restitant
• Sold individually
• Made in USA

Part Number: 91751-SS
Dimension Front-to-Back: 16 13/16”
Dimension Side-to-Side: 3 3/16”
Material: stainless steel
Weight: 0.5

stainless steel heat plate for some Sams grills.

Part Number: 91921
Dimension Front-to-Back: 15 1/2”
Dimension Side-to-Side: 3 1/8”
Material: stainless steel
Weight: 0.9

Stainless steel Heat Tents for some Sams grills. SET OF FIVE (5).

Part Number: 91921-X5
Dimension Front-to-Back: 15 1/2”
Dimension Side-to-Side: 3 1/8”
Material: stainless steel
Weight: 4.5

Universal adjustable stainless steel heat plate/Flame Tamer for some Sams grills. Designed primarily to replace lava rock/briquettes grates, the plate simply sets on four ”legs” in the bottom of the grill and covers the burner, much as the lava rocks would. Can also be used to replace existing heat plates/Flame Tamers if one of the four available lengths is suitable.

• Adjustable to four lengths: 19 3/4”, 22 3/4”, 25 3/4”, 28 3/4”.
• Replaces briquettes, lava rock, or existing heat distribution plates in many gas grills.
• Heavy duty stainless steel.
• Hardware included

Part Number: 92375
Dimension Front-to-Back: 29”
Dimension Side-to-Side: 8 1/2”
Material: stainless steel
Weight: 2.2

Universal adjustable stainless steel heat plate/ Flame Tamer for some Sams grills. Designed to fit most grills with front-to-back tube burners. Length adjusts from 12” to 18” in 1/2” increments; width is 4”. Replaces many original equipment front-to-back heat plates.

Part Number: 92381
Dimension Front-to-Back: ”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 0.85

105-13003-R Heat tent for some Sams grills. Porcelain enameled steel. Sold individually.

Fits Backyard Grill BGB530 and BGE530 series grills. May fit other models.

This heat tent replaces original Backyard Grill part 105-13003.

Part Number: BG1-105-13003-R
Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: porcelain steel
Weight: 1.0

105-13003-R-X5 Heat tent for some Sams grills. Set of five (5). Porcelain enameled steel.

Fits Backyard Grill BGB530 and BGE530 series grills. May fit other models.

This heat tent replaces original Backyard Grill part 105-13003.

Part Number: BG1-105-13003-R-X5
Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: porcelain steel
Weight: 2.1

104-13003-R Heat tent for some Sams grills. Porcelain enameled steel. Sold individually.

Fits Dyna-Glo DGB390 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 104-13003.

Part Number: DG1-104-13003-R
Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: porcelain steel
Weight: 1.0

104-13003-R-X3 Heat tent for some Sams grills. Set of three (3). Porcelain enameled steel.

Fits Dyna-Glo DGB390 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 104-13003.

Part Number: DG1-104-13003-R-X3
Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: porcelain steel
Weight: 1.0

105-13003-R Heat tent for some Sams grills. Porcelain enameled steel. Sold individually.

Fits Dyna-Glo DGE486, DGE530, DGF486, and M486 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 105-13003.

Part Number: DG1-105-13003-R
Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: porcelain steel
Weight: 1.0

105-13003-R-X4 Heat tent for some Sams grills. Set of four (4). Porcelain enameled steel..

Fits Dyna-Glo DGE486, DGE530, DGF486, and M486 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 105-13003.

Part Number: DG1-105-13003-R-X4
Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: porcelain steel
Weight: 1.0

105-13003-R-X5 Heat tent for some Sams grills. Set of five (5). Porcelain enameled steel.

Fits Dyna-Glo DGE486, DGE530, DGF486, and M486 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 105-13003.

Part Number: DG1-105-13003-R-X5
Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: porcelain steel
Weight: 1.0

144-13003-R Heat tent for some Sams grills. Porcelain enameled steel. Sold individually.

Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 144-13003.

Part Number: DG1-144-13003-R
Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 4 1/2”
Material: porcelain steel
Weight: 0.5

144-13003-R-X2 Heat tent for some Sams grills. Set of two (2). Porcelain enameled steel.

Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 144-13003.

Part Number: DG1-144-13003-R-X2
Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 4 1/2”
Material: porcelain steel
Weight: 1.0

153-03005-R Heat tent for some Sams grills. Porcelain enameled steel. Sold individually.

Fits Dyna-Glo DGA550 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 153-03005.

Part Number: DG1-153-03005-R
Dimension Front-to-Back: 15 9/16”
Dimension Side-to-Side: 5”
Material: porcelain steel
Weight: 1.0

153-03005-R-X5 Heat tent for some Sams grills. Set of five (5). Porcelain enameled steel.

Fits Dyna-Glo DGA550 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 153-03005.

Part Number: DG1-153-03005-R-X5
Dimension Front-to-Back: 15 9/16”
Dimension Side-to-Side: 5”
Material: porcelain steel
Weight: 1.0