Sams BQ05046-6

304 Stainless steel Infrared rear rotisserie burner with ceramic wafer. For use with both liquid propane (LP) and natural gas grills. 8,000 BTU. Orifice not included. Use old orifice or purchase our orifice part# CLA-VB0245 for LP, or part# CLA-VB0246 for natural gas applications.

Dimensions:

• Maximum overall length, including mounting tab on one end: 17”
• Maximum width: 3 3/8”
• Burner box 15 3/8” x 3 3/8”
• Mounting holes: 16 1/8” on center

Part Number: CLA-BL0229
Dimensions: 3 3/8” x 17”
Material: stainless steel and ceramic
Weight: 3.0

Stainless steel burner support bracket. Made in USA

Part Number: CLA-MS0109
Dimensions: 31 3/4
Material: stainless steel
Weight: 3.0

Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 60193-UNI-X3 for a set of three (3).

Part Number: 60193-UNI
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 9 1/2”
Material: cast iron
Weight: 6.45

Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 63012-UNI-X2 for a set of two (2).

Part Number: 63012-UNI
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 11 1/2”
Material: cast iron
Weight: 7.85

Stainless steel cooking grids (set of 3) for Sams model BQ05046-6.

Part Number: 5S463
Dimension Front-to-Back: 18 5/8”
Dimension Side-to-Side: 30 3/4”
Material: stainless steel tubes
Weight: 9.0

Cast iron cooking grid. Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-70P-CI
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 11 1/2”
Material: cast iron
Weight: 8.2

Cast iron cooking grid. Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-72P-CI
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 9 1/2”
Material: cast iron
Weight: 6.45

SET OF THREE/3 PACK Stainless steel heat diffuser. On some grill models it is also known as a Flame Tamer. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0151-X3
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 8 1/16”
Material: stainless steel
Weight: 4.05

Stainless steel heat diffuser. On some grill models it is also known as a Flame Tamer. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0151
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 8 1/16”
Material: stainless steel
Weight: 1.35

Bottom heat shield, which measures 6 3/4” x 29 7/8”. When adding the attached support brackets, the 6 3/4” becomes 7 3/4”. Made in USA

Part Number: CLA-MS0169
Dimensions: 7 3/4” x 29 7/8”
Material: stainless steel
Weight: 2.0

Ceramic electrode with male spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04100
Material: ceramic
Weight: 0.1

Stainless steel grease tray. The tray measures 26 1/2” x 15 1/8” and the handle is 31 11/16” x 2”. Unassembled; includes bolts & lock nuts. Made in USA

Part Number: CLA-DS0168
Dimensions: 26 1/2” x 15 1/8”
Material: stainless steel
Weight: 6.0

Premium grade stainless steel alternative warming rack for delicate foods like vegetabes and seafood.
Made in USA

Part Number: CLA-WS0165
Dimensions: 7 1/16” x 30 1/4”
Material: stainless steel
Weight: 2.35

#63 orifice for infrared burner CLA-BL0229; use on liquid propane (LP) gas grills. Includes brass elbow with 1/4” compression fitting.

Part Number: CLA-VB0245
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

#55 orifice for infrared burners use on natural Gas grills. Includes brass elbow with 1/4” compression fitting.

Part Number: CLA-VB0246
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

Smoker drawer kit assembly. This aftermarket part replaces the drawer and includes the following:

• Drawer with handle
• Drawer cover
• Mounting hardware and instructions
• Made in USA

WARNING: Before you order this part, please verify it can be used in your gas grill; refer to the dimensions and measure the space allowed in your grill. This smoker drawer kit does not fit into all grills. We know it fits four brand names/six model numbers. Please refer to our Return Policy.

Part Number: CLA-MS0166KIT
Dimensions: 18 1/4” x 3 3/4”
Material: stainless steel
Weight: 2.1

Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Aluminum foil grilling trays. Package of three.

• Heavy duty aluminum foil
• Re-usable
• Great for grilling delicate foods like fish and veggies

Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4

deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.

Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7