Nexgrill 720-0882DS

Shopping cart
replacement grill parts for all BBQ brands including DCS, Members Mark, Masterforge, Ducane, Kenmore, Broilmaster and more.Shopping cart
 
   Home > Nexgrill Grill Models > Nexgrill 720-0882DS



Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Nexgrill grill.

Replacement grill parts for Nexgrill model: 720-0882DS


 

720-0882DS Burners

stainless steel burner for Nexgrill model 720-0882DS.

Part Number: 14781
Dimensions: 15” x 0 5/8”
Material: stainless steel
Weight: 0.4

$30.04

Qty
 






 

720-0882DS Cooking Grids

stainless steel wire cooking grid for Nexgrill model 720-0882DS.

Part Number: 592S3
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 28 5/8”
Material: stainless steel wire
Weight: 10.0

$187.18

Qty
 




Cast iron cooking grids. Porcelain treated, flat matte finish. Sold as a set of three (3).

Part Number: 61183
Dimension Front-to-Back: 17”
Dimension Side-to-Side: 28 7/8”
Material: matte cast iron
Weight: 12.1

$88.35

Qty
 






 

720-0882DS Flame Tamers

SET OF THREE/3 PACK Stainless steel heat plate/Flame Tamer. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0157-X3
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: stainless steel
Weight: 2.16

$48.78

Qty
 




SET OF FOUR/4 PACK Stainless steel heat plate/Flame Tamer. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use..

Part Number: CLA-TS0157-X4
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: stainless steel
Weight: 2.88

$62.56

Qty
 




Stainless steel heat plate/Flame Tamer. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0157
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: stainless steel
Weight: 0.72

$17.61

Qty
 




Porcelain steel Flame Tamers. SET OF SIX.

Part Number: 97371-X6
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: porcelain steel
Weight: 3.3

$112.98

Qty
 




Porcelain steel Flame Tamer. Sold individually.

Part Number: 97371
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: porcelain steel
Weight: 0.55

$23.58

Qty
 






 

720-0882DS Igniter Components

electrode with female spade connection and 45 ins. wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 01473
Dimensions: 3 3/4” x 1”
Weight: 0.1

$12.58

Qty
 




Universal battery powered push button ignitor.
  • 1.5 volt
  • Has six (6) terminals (male spade connector)
  • Uses a single AA battery (not included))
  • 03610 and 03620 wires are commonly used with this igniter (not included)
  • Requires 7/8” mounting hole
  • Overall dimensions: 2” x 3 3/8” x 3”
  • Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03350
Weight: 0.7

$33.56

Qty
 




Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

  • Wire has female spade connector on one end and square plastic connector on the other
  • Square plastice connector attaches to spark generator
  • Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.



Part Number: 03610
Weight: 0.05

$9.07

Qty
 




14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03620
Weight: 0.1

$6.55

Qty
 






 

720-0882DS Heat indicators and Meat Thermometers

Heat indicator with a single probe and requires a 5/16” mounting hole. Note, the back side DOES NOT have an alignment pin.

Part Number: 00021
Dimensions: 3 5/8” x 1 3/4”
Weight: 0.2

$15.90

Qty
 






 

720-0882DS Accessories

10” Bamboo Skewers (100 pieces)
  • Ideal for grilling meat and vegetables
  • Soak skewers in water about 1/2 hour before using
  • Use foods that require the same amount of cooking time. Meats can be pre-cooked. Marinated foods are recommended for added flavor.
  • Great for chicken or beef, ham, lamb, or veal, salami, shrimp, or scallops, mushrooms, sliced peppers, omion, carrots, cherrytomatoes, pineapples, zuccini, and apples.


Part Number: 11060
Weight: 0.6
 

$4.09

Qty
 




15” Stainless steel tong.
  • Soft comfort grip
  • Locking mechanism


Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

$9.92

Qty
 




Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

$8.76

Qty
 




Stainless steel chicken roaster. Commonly called Beer Can roasters.
  • The best way to roast poultry on the grill
  • For use in barbecues and ovens
  • Dishwasher safe
  • Includes rack, rack support, and basting brush


Part Number: 41333
Material: stainless steel
Weight: 0.10

$19.84

Qty
 




Replacement heads for grill brush 77600. Set of two.

Part Number: 77650
Weight: 0.3

$6.73

Qty
 





Nexgrill 720-0882DS - 05-Sep-24



We ship Nexgrill BBQ parts worldwide

Back to Nexgrill grill parts



GRILLING  ACCESSORIES
Briquettes & Lava Rock
Grill Covers
Grilling Tools
Basting and Cleaning brushes
Wood Chips and Smoker Trays
Grid Toppers, Griddles & Racks
Fish and burger baskets
Grill and Tank Accessories
Shish-kebab Sets & Skewers
Grilling & outdoor cooking books

USA shipping (contiguous 48 states only) on all Nexgrill part orders $49 and more

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Thursday, September 5, 2024

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.

Help Center     About Us     Contact us     Shipping Policy     Return Policy     Privacy Policy