Rotisserie components for Nexgrill grills

Premium rotisserie replacement motor 60HZ for some Nexgrill grills. Commercial grade 304 stainless steel case. 40 pound spit capacity. Accepts a 5/16” standard square spit rod.

Part Number: 60013
Weight: 2.7

Universal Heavy Duty Rotisserie Kit for some Nexgrill grills.

• Motor with on/off switch.
• Heavy duty forks.
• Counter balance kit.
• 33 1/2” Spit rod.
• 6” Spit rod extension.
• Other rotiss components

Part Number: 60090
Dimensions: 33 1/2
Weight: 5.01

304 stainless steel rotisserie motor bracket to permit motor standoff from grill for some Nexgrill grills. Includes two stainless steel nuts and bolts. Made in USA .

Part Number: CLA-AU0008
Dimensions: 6” x 2 15/16”
Material: stainless steel
Weight: 0.4

Plastic spit rod handle with brass insert for some Nexgrill grills.

• Requires bushing BU-1 (5/16” square spit rods) or BU-2 (3/8” square spit rods)
• Will fit our spit rods: SR-5; SR-8; SR-43
• Requires a threaded end on the spit rod
• The mounting hole in the handle is 3/8-16 coarse thread female

Part Number: PH-1
Weight: 0.2

Universal rotisserie kit for some Nexgrill grills. THIS KIT INCLUDES AN INVERTED MOTOR BRACKET THAT POSITIONS THE MOTOR INVERTED. Includes:

• R06 stainless steel motor
• SR-5 31” X 5/16” spit rod
• BU-1 spit rod bushing
• PH-1 spit rod handle
• MH-1B Chrome-plated meat forks
• MB-3B Inverted motor mounting bracket and screws
• MB-2B Rotisserie bushing bracket (for grills with no bushing notch in casting)
• Maximum 25 lbs. balanced load

Fits grills with hoods up to 26 inches wide. Be sure to measure before ordering.

Note: The pre-drilled mounting holes in the MB-3B rotisserie motor mounting bracket are designed to accommodate existing hole patterns approximately 1 3/8” apart. It is possible that you may have to drill new holes.

NOTE: This kit does NOT include spit counter balance, which should be used to insure even weight distribution.

NOTE: Some of the parts in the kit are designed for a 5/16” rod. Rod SR-43, which is a 3/8” square rod, will not work with some of the parts in this kit.

Part Number: RK-MHP
Weight: 4.6

Universal rotisserie kit for some Nexgrill grills. Same as RK-MHP except with addition of longer 36” spit rod. Includes:

• R06 stainless steel motor
• SR-8 36” X 5/16” spit rod
• SR-5 31” X 5/16” spit rod
• BU-1 spit rod bushing
• PH-1 spit rod handle
• MH-1B Chrome-plated meat forks
• MB-3B Inverted motor mounting bracket and screws
• MB-2B Rotisserie bushing bracket (for grills with no bushing notch in casting)
• Maximum 25 lbs. balanced load

Fits grills with hoods up to 31 inches wide. Be sure to measure before ordering.

Note: The pre-drilled mounting holes in the MB-3B rotisserie motor mounting bracket are designed to accommodate existing hole patterns approximately 1 3/8” apart. It is possible that you may have to drill new holes.

NOTE: This kit does NOT include spit counter balance, which should be used to insure even weight distribution.

NOTE: Some of the parts in the kit are designed for a 5/16” rod. Rod SR-43, which is a 3/8” square rod, will not work with some of the parts in this kit.

Part Number: RK-MHP36
Weight: 4.6

Rotisserie kit for Charmglow stainless 3-Burner models for some Nexgrill grills. THIS KIT INCLUDES A CUSTOM ”STANDOFF” MOTOR BRACKET. Includes:

• Heavy-Duty R06 rotisserie motor with stainless steel case
• SR-5 31” X 5/16” spit rod
• BU-1 spit rod bushing
• PH-1 spit rod handle
• MH-1B Chrome-plated meat forks
• MB-4B Custom standoff rotisserie motor bracket and screws
• MB-2B Rotisserie bushing bracket (for grills with no bushing notch in casting)
• Maximum 25 lbs. balanced load

Fits grills with hoods up to 26 inches wide. Be sure to measure before ordering.

NOTE: This kit does NOT include spit rod counter balance, which should on all spit rods be used to insure even weight distribution.

NOTE: Some of the parts in the kit are designed for a 5/16” rod. Rod SR-43, which is a 3/8” square rod and requires a 9/16” rod hole, will not work with some of the parts in this kit.

Part Number: RKCHAR1
Weight: 4.6

Universal durable battery operated rotisserie motor for some Nexgrill grills. Conveniently eliminates the need for electric cords. Runs on 2 D cells (not included).

Part Number: RO-4
Weight: 1.0

Heavy duty stainless steel 6 1/4” x 4” x 2 1/8” cased universal rotisserie motor for some Nexgrill grills. On-off switch and 3 foot cord. Maximum 25 lb. balanced load. (120V, 9W, 50/60 HZ, RPM: 2.5/2.8)

Part Number: RO-6
Material: Stainless steel case
Weight: 2.0