Parts for Nexgrill 720-0783H

Home > Nexgrill Grill Models > Nexgrill 720-0783H

Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Nexgrill grill.

Replacement grill parts for Nexgrill model: 720-0783H

720-0783H Burners

Stainless steel tube burner for Nexgrill model 720-0783H.

Part Number: 10381
Dimensions: 15” x 1”
Material: stainless steel
Weight: 0.5

stainless steel burner for Nexgrill model 720-0783H

$33.81

All Nexgrill Burners

720-0783H Cooking Grids

Cast iron cooking grids. Porcelain enameled, glossy finish. Sold as a set of two (2).

Part Number: 66342
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 26 1/2”
Material: gloss cast iron
Weight: 10.1

$124.81

All Nexgrill Cooking Grids

720-0783H Flame Tamers

SET OF THREE/3 PACK Stainless steel heat plate/Flame Tamer. Made in USA

.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0157-X3
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: stainless steel
Weight: 2.16

$48.78

SET OF FOUR/4 PACK Stainless steel heat plate/Flame Tamer. Made in USA

.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use..

Part Number: CLA-TS0157-X4
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: stainless steel
Weight: 2.88

$62.56

Stainless steel heat plate/Flame Tamer. Made in USA

.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0157
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: stainless steel
Weight: 0.72

$17.61

Porcelain steel Flame Tamers. SET OF SIX.

Part Number: 97371-X6
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: porcelain steel
Weight: 3.3

$112.98

Porcelain steel Flame Tamer. Sold individually.

Part Number: 97371
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: porcelain steel
Weight: 0.55

$23.58

All Nexgrill Flame Tamers

720-0783H Igniter Components

Universal battery powered push button ignitor.

1.5 volt
Has six (6) terminals (male spade connector)
Uses a single AA battery (not included))
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole
Overall dimensions: 2” x 3 3/8” x 3”
Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03350
Weight: 0.7

$33.56

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

Wire has female spade connector on one end and square plastic connector on the other
Square plastice connector attaches to spark generator
Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

$9.07

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

$6.55

electrode

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 07370
Dimensions: 4 3/16” x 0 3/4”
Material: ceramic
Weight: 0.1

$12.47

All Nexgrill Igniter Components

720-0783H Heat indicators and Meat Thermometers

Round 2 3/8” diameter heat indicator, includes one wing nut and one locking nut.

Requires minimum 3/8” mounting hole
Single 1 3/8” probe
Threaded portion of probe stops at 1/2” from base
See photo for details

Part Number: 00012
Dimensions: 2 3/8” x 2 3/8”
Weight: 0.1

$15.90

All Nexgrill Heat indicators and Meat Thermometers

720-0783H Accessories

Texas hickory flavor wood chips. 800g.

Part Number: 00220
Weight: 2.0

$6.87

15” Stainless steel tong.

Soft comfort grip
Locking mechanism

Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

$9.92

economy basting brushes. Two brushes, 7.5” long.

Part Number: 43054
Weight: 0.1

$6.64

Aluminum foil grilling trays. Package of three.

Heavy duty aluminum foil
Re-usable
Great for grilling delicate foods like fish and veggies

Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4

$8.64

Abrasive scrubbing brush. Ideal for cleaning porcelain grills.

Part Number: 71448
Weight: 0.2

$5.96

All Accessories

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Thursday, September 5, 2024

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.