Jenn-Air 720-0709

Shopping cart
replacement grill parts for all BBQ brands including DCS, Members Mark, Masterforge, Ducane, Kenmore, Broilmaster and more.Shopping cart
 
   Home > Jenn-Air Grill Models > Jenn-Air 720-0709

Jenn-Air 5-Burner LP gas grill with infrared side burner and rear rotisserie burner



Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Jenn-Air grill.

Part diagrams and owners manuals for Jenn-Air model: 720-0709



Click small image to enlarge. Click Large image to reduce.
Double click for new window
Grill image for model: 720-0709
Exploded parts diagram for model: 720-0709
Parts list for model: 720-0709
Parts list for model: 720-0709

Replacement gas grill parts for Jenn-Air model: 720-0709


 

720-0709 Burners

Stainless steel burner. Fits premium and designer stainless grills by Charbroil. Includes:
  • Made of high quality 304 stainless steel
  • Spider exclusion screen
  • Ignition electrode mounting holes on both sides of burner
  • Back mounting hole is round, inspect your old burner

Replaces Jenn-Air factory part# 20001433A0



Part Number: CBP3
Dimensions: 16 15/16
Material: stainless steel
Weight: 1.0

$42.87

Qty
 






 

720-0709 Cooking Grids

Stainless steel cooking grids. Sold as a set of three (3).

Replaces Jenn-Air factory part# 13000382A0



Part Number: 5S793
Dimension Front-to-Back: 18 13/16”
Dimension Side-to-Side: 31 1/2”
Material: stainless steel wire
Weight: 17.1

$235.48

Qty
 




Premium universal cooking grids. Set of three (3). Porcelain treated cast iron. Matte finish.

Each panel measures:
  • Front-to-Back: 18 3/4”
  • Side-to-Side: 9 1/2”
Total Side-to-Side: 28 1/2”


Part Number: 60193-UNI-X3
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 28 1/2”
Material: cast iron
Weight: 19.35

$133.47

Qty
 




Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 60193-UNI-X3 for a set of three (3).



Part Number: 60193-UNI
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 9 1/2”
Material: cast iron
Weight: 6.45

$51.52

Qty
 




Cast iron cooking grid. Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-72P-CI
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 9 1/2”
Material: cast iron
Weight: 6.45

$51.52

Qty
 




Premium quality stainless steel cooking grid. Our USA-made premium stainless grids are simply the best obtainable. We have them manufactured here in the USA to our specifications and standards, which are high. Of course, they're not available anywhere else.

Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or coated carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best, you've found it.

  • 304 commercial grade stainless steel
  • 1/4” diameter solid stainless rods
  • Dimensions: 18 7/8” x 10”
  • Made in USA .
  • Sold individually.


Part Number: CLS9151
Dimension Front-to-Back: 18 7/8”
Dimension Side-to-Side: 10”
Material: solid stainless steel
Weight: 4.0

$38.34

Qty
 




Cast iron cooking grids (set of 3). Porcelain enameled, glossy finish.

Part Number: 60193
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 29 7/16”
Material: gloss cast iron
Weight: 17.2

$122.62

Qty
 






 

720-0709 Heat Plates

Stainless steel heat plate for Jenn-Air model 720-0709.

Replaces Jenn-Air factory part# 04005255A0



Part Number: BBQHP1
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 1/2”
Material: stainless steel
Weight: 0.7

$25.37

Qty
 






 

720-0709 Flame Tamers

SET OF FOUR/4 PACK Stainless steel heat plate/Flame Tamer. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0158-X4
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 3/8”
Material: stainless steel
Weight: 3.08

$91.72

Qty
 




SET OF FIVE/5 PACK Stainless steel heat plate/Flame Tamer. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0158-X5
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 3/8”
Material: stainless steel
Weight: 3.85

$109.85

Qty
 




Stainless steel heat plate/Flame Tamer. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0158
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 3/8”
Material: stainless steel
Weight: 0.77

$26.88

Qty
 






 

720-0709 Igniter Components

Universal battery powered push button ignitor.
  • 1.5 volt
  • Has six (6) terminals (male spade connector)
  • Uses a single AA battery (not included))
  • 03610 and 03620 wires are commonly used with this igniter (not included)
  • Requires 7/8” mounting hole
  • Overall dimensions: 2” x 3 3/8” x 3”
  • Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03350
Weight: 0.7

$33.56

Qty
 




Burner mounted replacement electrode for use with burner 15641.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03351
Material: ceramic
Weight: 0.2

$12.96

Qty
 




Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

  • Wire has female spade connector on one end and square plastic connector on the other
  • Square plastice connector attaches to spark generator
  • Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.



Part Number: 03610
Weight: 0.05

$9.07

Qty
 




14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03620
Weight: 0.1

$6.55

Qty
 






 

720-0709 Valves, Orifices, and Manifolds

Neoprene valve gasket for clamp-on gas control valves. 19mm.

Part Number: 00019
Dimensions: 0 1/2” x 0 1/4”
Material: neoprene
Weight: 0.01

$5.24

Qty
 






 

720-0709 Accessories

6 chrome plated 18” shish-ke-bab skewers

Part Number: 63371
Weight: 0.2

$14.27

Qty
 




15” Stainless steel tong.
  • Soft comfort grip
  • Locking mechanism


Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

$9.92

Qty
 




economy basting brushes. Two brushes, 7.5” long.

Part Number: 43054
Weight: 0.1

$6.64

Qty
 




Stainless steel chicken roaster. Commonly called Beer Can roasters.
  • The best way to roast poultry on the grill
  • For use in barbecues and ovens
  • Dishwasher safe
  • Includes rack, rack support, and basting brush


Part Number: 41333
Material: stainless steel
Weight: 0.10

$19.84

Qty
 




Abrasive scrubbing brush. Ideal for cleaning porcelain grills.

Part Number: 71448
Weight: 0.2

$5.96

Qty
 





Jenn-Air model 720-0709. If the BBQ grill part you are looking for is not listed above, make a note
of the dimensions of your original part and try searching by part category. 05-Sep-24



We ship Jenn-Air BBQ parts worldwide

Back to Jenn-Air grill parts



GRILLING  ACCESSORIES
Briquettes & Lava Rock
Grill Covers
Grilling Tools
Basting and Cleaning brushes
Wood Chips and Smoker Trays
Grid Toppers, Griddles & Racks
Fish and burger baskets
Grill and Tank Accessories
Shish-kebab Sets & Skewers
Grilling & outdoor cooking books

USA shipping for orders of gas grill parts of $49 or more for Jenn-Air gas BBQ grills (contiguous 48 states only)

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Thursday, September 5, 2024

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.

Help Center     About Us     Contact us     Shipping Policy     Return Policy     Privacy Policy