Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Jenn-Air grill.
Jenn-Air Burners
Burner mounting plate for some Jenn-Air grills. This part is used to reinforce the front grill housing so the burner can be mounted to the grill. In some cases, the grill housing has rusted or corroded such that the burner cannot be properly mounted to the front of the grill.
- Premium grade stainless steel
- Includes gasket and mounting screw
- Comes with complete installation instructions
- Sold individually.
For models:
- CF9080/85/86
- VCS300/3500/35BI/4000/4005/5000/5005/5010/50BI
- VCS3507/4007/5007/3507BI/5007BI
Part Number: 03501
Dimensions: 3 3/4” x 4”
Material: stainless steel
Weight: 0.16
$25.90
|
|
Commercial premium 304 grade stainless steel burner for some Jenn-Air grills.
Part Number: 13001
Dimensions: 17” x 1”
Material: stainless steel
Weight: 0.8
$44.04 $20.15 |
|
Burner made of commercial grade 304 stainless steel for some Jenn-Air grills.
Part Number: 13361
Dimensions: 15 13/16” x 4 3/8”
Material: stainless steel
Weight: 0.9
$24.95
|
|
Cast iron burner for some Jenn-Air grills.
Part Number: 23301
Dimensions: 15 3/4” x 2 7/8”
Material: cast iron
Weight: 3.9
$36.87
|
|
Cast stainless steel burner for some Jenn-Air grills. Tired of changing out rusted cast iron burners? Far superior to the cast iron and brass versions, this burner will probably outlast your grill. Designed to replace cast iron and brass burners of same design.
NOTE: This burner is equiped with an air intake adjustable control shutter (not shown in photos) and with an air intake control screw for regulating the air/gas mixture into the burner. Natural gas applications require more air (more open screw) than lquid propane (LP). If necessary, adjust screw to get a yellow-tipped blue flame.
Part Number: 23301-CSS
Dimensions: 16” x 2 7/16”
Material: cast stainless steel
Weight: 3.2
$99.99
|
|
Cast iron burner for some Jenn-Air grills.
Part Number: 26301
Dimensions: 15 13/16” x 2 3/16”
Material: cast iron
Weight: 3.8
$36.87
|
|
Cast iron burner for some Jenn-Air grills.
Part Number: 28091
Dimensions: 17 1/2” x 8”
Material: cast iron
Weight: 10.0
$92.53
|
|
Stainless steel burner for some Jenn-Air grills. Fits premium and designer stainless grills by Charbroil. Includes:
- Made of high quality 304 stainless steel
- Spider exclusion screen
- Ignition electrode mounting holes on both sides of burner
- Back mounting hole is round, inspect your old burner
Part Number: CBP3
Dimensions: 16 15/16
Material: stainless steel
Weight: 1.0
$42.87
|
|
304 Stainless steel Infrared rear rotisserie burner with ceramic wafer for some Jenn-Air grills. For use with both liquid propane (LP) and natural gas grills. 8,000 BTU. Orifice not included. Use old orifice or purchase our orifice part#
CLA-VB0245 for LP, or part#
CLA-VB0246 for natural gas applications.
Dimensions:
- Maximum overall length, including mounting tab on one end: 17”
- Maximum width: 3 3/8”
- Burner box 15 3/8” x 3 3/8”
- Mounting holes: 16 1/8” on center
Part Number: CLA-BL0229
Dimensions: 3 3/8” x 17”
Material: stainless steel and ceramic
Weight: 3.0
$118.70
|
|
Burner made of premium quality 304 stainless steel for some Jenn-Air grills. Sold individually, number required varies by grill.
Part Number: CLA-BS0199
Dimensions: 15 13/16” x 4 1/2”
Material: stainless steel
Weight: 0.7
$24.95
Premium grade quality stainless steel tube burner for some Jenn-Air grills.
Part Number: CLA-BS0225
Dimensions: 17 7/8” x 3/4”
Material: stainless steel
Weight: 0.35
$19.01
|
|
304 Stainless steel 15,000 BTU infrared rotissierie burner for some Jenn-Air grills. For use with both liquid propane (LP) and natural gas grills. Orifice not included. Use old orifice or purchase our orifice part#
CLA-VL0251 for LP, or part#
CLA-VB0246 for natural gas applications.
Dimensions:
- Maximum overall length, including mounting tab on one end: 20 7/8”
- Maximum width: 3 3/8”
Part Number: CLA-BS0250
Dimensions: 3 3/8” x 20”
Material: stainless steel and ceramic
Weight: 3.50
$122.70
304 Stainless steel 15,000 BTU infrared rotissierie burner for some Jenn-Air grills. For use with both liquid propane (LP) and natural gas grills. Includes collector box. Use old orifice.
Dimensions:
- Maximum overall length, including mounting tab on one end: 20 7/8”
- Maximum width: 3 3/8”
Part Number: CLA-BS0358
Dimensions: 3 3/8” x 20”
Material: stainless steel and ceramic
Weight: 3.50
$123.95
Burner mounting plate for some Jenn-Air grills. This part is used to reinforce the front grill housing so the burner can be mounted to the grill. In some cases, the grill housing has rusted or corroded such that the burner cannot be properly mounted to the front of the grill.
- Sold individually, number required varies. Use one per burner.
- Includes mounting bolt and nut
- Includes extra holes for mounting to grill, if necessary.
- Comes with complete installation instructions.
For models:
- CF9080/85/86
- VCS300/3500/35BI/4000/4005/5000/5005/5010/50BI
- VCS3507/4007/5007/3507BI/5007BI
Made in USA
Part Number: CLA-MS0227
Dimensions: 3 3/4” x 4 15/16”
Material: stainless steel
Weight: 0.11
$17.92
|
|
Rotisserie burner for some Jenn-Air grills. Orifice and fitting not included. Best if used with original orifice and fitting. (If a new orifice and fitting is needed, please indicate that during check-out in the comment section.)
Part Number: SBB00061
Dimensions: 3 1/4” x 12 3/8”
Weight: 2.0
$67.90
|
|
Stainless Steel Burner For Tuscany & Perfect Flame Gill Models for some Jenn-Air grills.
Part Number: TUST1
Dimensions: 17 7/8
Material: stainless steel
Weight: 1.0
$19.01
|
|