Fiesta EA24025

Stainless steel burner and venturi assembly for Fiesta 240 series grills. This part is also the factory replacement for burner SM164A12

Part Number: SM191A-12
Dimensions: 3 1/2” x 13 7/8”
Material: stainless steel
Weight: 1.22

Stainless steel burner and venturi assembly kit. Comes with all necessary gaskets and screws.

Part Number: 16702-72401
Dimensions: 15 1/2” x 3 1/2”
Material: stainless steel
Weight: 2.5

Stainless steel burner for Fiesta model EA24025.

Part Number: 16702
Dimensions: 15 1/2” x 3 1/2”
Material: stainless steel
Weight: 1.4

two venturi gaskets with screws for Fiesta model EA24025.

Part Number: 00400
Dimensions: 3 1/16” x 1 1/4”
Weight: 0.05

Universal stainless venturi flexible and adjustable from 8” to 11” and sold individually. Used to replace venturis for virtually any grill model for which no exact fit venturi is available. Gasket & screws not included, see part numbers 00400 or SHK4.

Part Number: 72401
Dimensions: 7 1/2” x 11”
Material: zinc plated steel
Weight: 0.3

Spider exclusion screens. Installs over venturi air shutters to keep spiders out. Approximately 7/8” in diameter and 1” long.

Part Number: 70002
Dimensions: 1” x 7/8”
Material: stainless steel
Weight: 0.1

Genuine OEM Fiesta porcelain steel cooking grid.

• Porcelain enameled, glossy finish.
• Sold individually.
• Fits 240 series grills, others

Note: This is also a factory replacement for part SP124-3, which has been discontinued.

Part Number: SP124A-3
Dimension Front-to-Back: 11 1/4”
Dimension Side-to-Side: 19 7/8”
Material: porcelain steel
Weight: 2.36

Porcelain steel cooking grid. Porcelain enameled, glossy finish. Sold individually.

Part Number: 54101
Dimension Front-to-Back: 11 3/8”
Dimension Side-to-Side: 20”
Material: porcelain steel wire
Weight: 2.0

Chrome steel cooking grid. Sold individually.

Part Number: 40101
Dimension Front-to-Back: 11 1/4”
Dimension Side-to-Side: 19 1/2”
Material: chrome steel wire
Weight: 2.4

carbon steel rock grate for Fiesta model EA24025.

Part Number: 90101
Dimensions: 10” x 18 3/8”
Material: steel wire
Weight: 3.2

Stainless steel Heat Plate; also known as a Flame Tamer and Smart Bar. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0324
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 7 3/16”
Material: stainless steel
Weight: 1.6

Genuine OEM Fiesta Smart Bar.

Note: This is also a factory replacement for part SP68-9, which has been discontinued.

Part Number: SM5072-9
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 7 1/8”
Material: aluminized steel
Weight: 2.6

Genuine OEM Fiesta snap-on electrode, wire, and collector box assembly.

Note: This part does not fit our after-market burners such as 19002.

This part only fits OEM burners. OEM burner part numbers usually start with letters SM and SP).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive early Aug.

Part Number: SP5016-20
Weight: 0.05

Push button igniter. For single wire for grills with no side burner. Wires not included. Comes in black or grey as available from manufacturer.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-21
Weight: 0.05

20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03750
Dimensions: 1/16
Weight: 0.05

Universal adapter wire with male round and female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03751
Weight: 0.05

Collector box and electrode assembly. Tongue style burner mounted collector box with ceramic electrode, 15” wire, and female round connector. Not designed to mount on original equipment burners. Fits our stainless steel burners with special mounting bracket only. Will NOT fit on cast iron burners.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03900
Material: ceramic
Weight: 0.2

Stainless steel wire grease cup holder for mini bucket #S15112 which has been discontinued and replaced with mini bucket # 4673-FC. This wire holder can also be used with tin cans for easy disposal of grease.
Made in USA

Part Number: S15111
Material: stainless steel
Weight: 0.02

Phenolic standoff spacer (1 1/2” x 1 1/8”) used between lid handle and the grill's lid for Fiesta model EA24025.

Part Number: SP5001-40
Weight: .03

Genuine OEM Fiesta control knob.

• Off position D-Value: 6 o'clock
• Knob diameter: 2”
• Socket diameter: 5/16”
• Knob shaft: None (flat)

Part Number: SP7-7
Weight: 0.1

Wheel 6” plastic with 3/8” axle hole for Fiesta model EA24025.

Part Number: 10892-608
Weight: 0.2

Wheel bolt 3.25” long; uses one hinge pin part number S21233 not included for Fiesta model EA24025.

Part Number: 10240-13
Weight: .10

Genuine OEM Fiesta chrome warming rack for Fiesta model EA24025.

Part Number: SP5021-3
Material: chrome steel
Weight: 1.15

Universal warming rack. For use on grills with at least 22” inside dimension.

Part Number: AP-6A
Dimensions: 6” x 21 1/2”
Material: Chrome steel
Weight: 1.3

HEAT SHIELD FIESTA 240/300 -- (2011) for Fiesta model EA24025.

Part Number: SM5069-9
Dimensions: 8 3/8” x 18 3/8”
Weight: 1.46

Hinge pin clip for Fiesta model EA24025.

Part Number: S21233
Weight: 0.01

LEG EXTENSION OFF-SET for Fiesta model EA24025.

Part Number: 11494-148
Weight: 0.05

Durable 2 5/16” round briquettes

• Self-cleaning
• Control flare-ups while holding an even heat pattern.
• About 53 pieces, covers approximately 275 sq. inches.
• Fits all gas grills

Part Number: BQ-5
Weight: 7.2

Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.

Part Number: 45887
Material: pummise
Weight: 7.0

Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

50-piece ceramic briquette set. Works in all grills designed for briquettes or lava rock. Fits briquette tray parts 94751, 92571 and other simular trays.

Part Number: 41650
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.2

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Stainless steel chicken roaster. Commonly called Beer Can roasters.

• The best way to roast poultry on the grill
• For use in barbecues and ovens
• Dishwasher safe
• Includes rack, rack support, and basting brush

Part Number: 41333
Material: stainless steel
Weight: 0.10

Replacement heads for grill brush 77600. Set of two.

Part Number: 77650
Weight: 0.3