Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Fiesta grill.
Fiesta Igniter Components
Push-Button self-grounding
piezo spark generator for some Fiesta grills. Has round male connector, so connecting wire needs to be female
round connector. If needed, see part#
03199C for a short adapter wire that converts flat female
spade connectors to female round. For more information, see our help center article
Ignition 101.
Part Number: 03100
Weight: 0.1
$9.25
|
|
Push-Button self-grounding
piezo spark generator; requiers 3/4” mounting hole for some Fiesta grills. Primary connector is a round male connector, so connecting wire needs to be female
round connector. If needed, see part#
03199C for a short adapter wire that converts flat female
spade connectors to female round. Secondary connector is a flat male
spade connector used to conduct spark to a secondary electrode, such as a side burner, or used as a ground in some applications. See ground wire part#
03620. For more information, see our article
Ignition 101.
Part Number: 03120
Weight: 0.1
$9.74
|
|
Universal 5 1/2” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire for some Fiesta grills.
NOTICE: EACH END HAS A PLASTIC PROTECTOR CAP.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03197
Weight: 0.05
$5.31
Universal 2 5/8” adapter wire with female round and male
spade connectors for some Fiesta grills. Primarily used when connecting spark generators (ignitors) to electrode wires with unlike connectors. Typically, push-button and rotory
piezo spark generators have male
round connectors, while battery operated electronic spark generators usually have male
spade connectors.
- Can change male round to male spade
- Can change female spade to female round
ALL
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03198
Weight: 0.05
$5.31
Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover for some Fiesta grills.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03199C
Weight: 0.05
$4.37
Universal battery powered push button ignitor for some Fiesta grills.
- 1.5 volt
- Has one (1) terminal (male spade connector)
- Uses a single AAA battery (not included)
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03310
Weight: 0.3
$16.95
Universal volt battery powered push button ignitor for some Fiesta grills.
- 1.5 volt
- Has two (2) terminals (male spade connector)
- Uses a single AAA battery (not included)
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03320
Weight: 0.3
$31.50
Universal battery powered push button ignitor for some Fiesta grills.
- 1.5 volt
- Has three (3) terminals (male spade connector)
- Uses a single AAA battery (not included)
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03330
Weight: 0.5
$18.48
Universal three-outlet battery powered push button ignitor for some Fiesta grills.
- 1.5 volt
- Has three (3) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03333
Dimensions: 2 9/16” x 2”
Weight: 0.5
$35.57
Universal battery powered push button ignitor for some Fiesta grills.
- 1.5 volt
- Has (5) terminals (male spade connector)
- Uses a single AAA battery (not included)
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03335
Dimensions: 2 5/8” x 2”
Weight: 0.3
$19.43
Universal four-outlet battery powered push button ignitor for some Fiesta grills.
- 1.5 volt
- Has four (4) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03340
Weight: 0.5
$31.50
Universal battery powered push button ignitor for some Fiesta grills.
- 1.5 volt
- Has six (6) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03350
Weight: 0.7
$33.56
Universal battery powered push button ignitor for some Fiesta grills.
- 1.5 volt
- Has five (5) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7
$39.86
Ignition connection wire used to connect battery powered spark generators to electrodes for some Fiesta grills. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$9.07
|
|
14” ground wire with female
spade connector and eye connectors for some Fiesta grills. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.55
|
|
20” Ignitor adapter wire with female
spade connector and male
round connector for some Fiesta grills. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03750
Dimensions: 1/16
Weight: 0.05
$6.01
|
|
Universal adapter wire with male round and female
spade connectors for some Fiesta grills.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03751
Weight: 0.05
$3.98
Collector box and electrode assembly for some Fiesta grills. Tongue style burner mounted collector box with ceramic electrode, 15” wire, and female
round connector. Not designed to mount on original equipment burners. Fits our stainless steel burners with special mounting bracket only.
Will NOT fit on cast iron burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03900
Material: ceramic
Weight: 0.2
$10.84
|
|
Electrode and connector wire; used on burner 15691 for some Fiesta grills.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 05691
Material: ceramic
Weight: 0.1
$10.35
|
|
Push button igniter for some Fiesta grills. For single wire for grills with no side burner. Wires not included. Comes in black or grey as available from manufacturer.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-21
Weight: 0.05
$6.37
|
|
Genuine OEM Fiesta push button igniter for some Fiesta grills. For two-wire grills with second wire for side burner. Wires not included.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-22
Weight: 0.2
$8.19
|
|
Genuine OEM Fiesta 28” wire for side burner for some Fiesta grills. One female
spade connector, one female
round connector..
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-T16
Dimensions: 28
Weight: 0.05
$4.50
|
|
Universal collector box with electrode and wire for some Fiesta grills. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-15B
Weight: 0.3
$14.41
46” Wire with female
spade connectors and square plastic connectors for some Fiesta grills.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-30B
Dimensions: 46
Weight: 0.1
$7.10
|
|
Battery powered push button igniter for some Fiesta grills.
- Has four (4) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4” or 13/16” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IGEIB4-B
Weight: 0.3
$34.08
|
|
Battery powered push button igniter for some Fiesta grills.
- Has six (6) spade type male connectors.
- Uses 1 AA battery (not supplied)
- Requires 7/8” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IGEIB6-B
Weight: 0.3
$31.52
|
|
IGNITOR-2 WIRE SCREW IN
For more information about ignition systems and components, please see article Ignition 101 in our help center for some Fiesta grills.
Part Number: SP12A-20
Weight: 0.3
Image not available
$4.23
IGNITOR-1 WIRE ROTARY KIT 24-1
For more information about ignition systems and components, please see article Ignition 101 in our help center for some Fiesta grills.
Part Number: SP13-20
Weight: 0.4
Image not available
$12.24
Genuine OEM Fiesta rotary 2-outlet spark generator; includes knob, not shown in photo for some Fiesta grills.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: SP14A-20
Weight: 0.08
$18.30
|
|
IGNITOR WIRE 4”
For more information about ignition systems and components, please see article Ignition 101 in our help center for some Fiesta grills.
Part Number: SP15-20
Weight: 0.05
$2.83
|
|
WIRE IGNITOR CLIP SML BAR
For more information about ignition systems and components, please see article Ignition 101 in our help center for some Fiesta grills.
Part Number: SP36-15
Weight: 0.05
Image not available
$0.70
ELECTRONIC IGNITOR 500
For more information about ignition systems and components, please see article Ignition 101 in our help center for some Fiesta grills.
Part Number: SP37-20K
Weight: 0.5
Image not available
$10.73
GROUND WIRE 4”
For more information about ignition systems and components, please see article Ignition 101 in our help center for some Fiesta grills.
Part Number: SP38-20
Weight: 0.05
Image not available
$2.93
PUSH BUTTON SNGL TERMINAL
For more information about ignition systems and components, please see article Ignition 101 in our help center for some Fiesta grills.
Part Number: SP46A-20
Weight: 0.3
Image not available
$4.75
IGNITOR 2 WIRE GUSTO +
For more information about ignition systems and components, please see article Ignition 101 in our help center for some Fiesta grills.
Part Number: SP47A-20
Weight: 0.3
Image not available
$5.45
JUMPER WIRE AUTOMATIC IGNITOR
For more information about ignition systems and components, please see article Ignition 101 in our help center for some Fiesta grills.
Part Number: SP49-20
Weight: 0.3
Image not available
$1.25
Genuine OEM Fiesta snap-on electrode, wire, and collector box assembly for some Fiesta grills.
Note: This part does not fit our after-market burners such as 19002.
This part only fits OEM burners. OEM burner part numbers usually start with letters SM and SP).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive early Aug.
Part Number: SP5016-20
Weight: 0.05
$9.03
|
|
IGNITOR CLIP ASSY 2 WIRE H BURNER
For more information about ignition systems and components, please see article Ignition 101 in our help center for some Fiesta grills.
Part Number: SP5017-20
Weight: 0.3
$10.87
|
|
WIRE - JUMPER 4”
For more information about ignition systems and components, please see article Ignition 101 in our help center for some Fiesta grills.
Part Number: SP5023-20
Weight: 0.3
Image not available
$1.71
FG ROTISSERIE IGNITOR WIRE
For more information about ignition systems and components, please see article Ignition 101 in our help center for some Fiesta grills.
Part Number: SP5040-20
Weight: 0.05
Image not available
$0.70
ELECTRODE SIDE BURNER 500 *
For more information about ignition systems and components, please see article Ignition 101 in our help center for some Fiesta grills.
Part Number: SP56-20
Weight: 0.1
$5.35
|
|
ELECTRODE S/B SG445
For more information about ignition systems and components, please see article Ignition 101 in our help center for some Fiesta grills.
Part Number: SP62-20
Weight: 0.1
Image not available
$10.06
IGNITOR 445 4 POLE ELECTRONIC
For more information about ignition systems and components, please see article Ignition 101 in our help center for some Fiesta grills.
Part Number: SP70-20
Weight: 0.3
Image not available
$20.86
IGNITOR REMOTE SWITCH
For more information about ignition systems and components, please see article Ignition 101 in our help center for some Fiesta grills.
Part Number: SP71-20
Weight: 0.3
Image not available
$20.86
IGNITOR BUTTON BLACK BE
For more information about ignition systems and components, please see article Ignition 101 in our help center for some Fiesta grills.
Part Number: SP72-20
Weight: 0.3
Image not available
$2.48
REMOTE IGNITER LEAD ASSEMBLY
For more information about ignition systems and components, please see article Ignition 101 in our help center for some Fiesta grills.
Part Number: SP73-20
Weight: 0.3
Image not available
$0.70
ELECTRODE BRNR USE W/SP105-12
For more information about ignition systems and components, please see article Ignition 101 in our help center for some Fiesta grills.
Part Number: SP78-20
Weight: 0.1
Image not available
$10.35
|
|
ELECTRODE FOR SP8-20 CLIP ON
For more information about ignition systems and components, please see article Ignition 101 in our help center for some Fiesta grills.
Part Number: SP9-20
Weight: 0.1
Image not available
$11.80
IGNITOR ROTARY H BURNER
For more information about ignition systems and components, please see article Ignition 101 in our help center for some Fiesta grills.
Part Number: SP95-24
Weight: 0.2
Image not available
$7.45
IGNITOR SEAR BURNER *
For more information about ignition systems and components, please see article Ignition 101 in our help center for some Fiesta grills.
Part Number: SP98-20
Weight: 0.3
Image not available
$7.97
ELECTRODE CLIP-ON
For more information about ignition systems and components, please see article Ignition 101 in our help center for some Fiesta grills.
Part Number: SP9A-20
Weight: 0.4
$4.30
|
|
Push-button electronic igniter with four (4)
spade connectors for some Fiesta grills. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG4010
Weight: 0.2
$18.48
|
|
Universal 3 outlet rotary spark generator for some Fiesta grills. Includes knob.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: UP-8B
Weight: 0.3
$21.96
Snap In
Piezo Ignitor for some Fiesta grills. Fits Weber Genesis Silver A,B,C and Newer Spirit E310 & E320.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: UP-9B
Weight: 0.2
$8.38
|
|