Fiesta 30030-913

Stainless steel twin oval burner and venturi assembly. Fits some Broil-Mate and Fiesta 300 series grills. Includes

• SS Oval burner
• Two (2) twist-in venturis with integrated spider guards
• Ceramic electrode and wire

Part Number: SM190A-12
Material: stainless steel
Weight: 1.3

Spider exclusion screens. Installs over venturi air shutters to keep spiders out. Approximately 7/8” in diameter and 1” long.

Part Number: 70002
Dimensions: 1” x 7/8”
Material: stainless steel
Weight: 0.1

Genuine OEM Fiesta porcelain steel cooking grid.

Note: This is also a factory replacement for part SP43-3, which has been discontinued.

Part Number: SP43A-3
Dimension Front-to-Back: 13 1/4”
Dimension Side-to-Side: 21 3/8”
Material: porcelain steel
Weight: 3.0

Genuine OEM Fiesta Smart Bar.

Note: This is also a factory replacement for part SP68-9, which has been discontinued.

Part Number: SM5072-9
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 7 1/8”
Material: aluminized steel
Weight: 2.6

Stainless steel Heat Plate; also known as a Flame Tamer and Smart Bar. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0324
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 7 3/16”
Material: stainless steel
Weight: 1.6

Genuine OEM Fiesta snap-on electrode, wire, and collector box assembly.

Note: This part does not fit our after-market burners such as 19002.

This part only fits OEM burners. OEM burner part numbers usually start with letters SM and SP).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive early Aug.

Part Number: SP5016-20
Weight: 0.05

Push button igniter. For single wire for grills with no side burner. Wires not included. Comes in black or grey as available from manufacturer.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-21
Weight: 0.05

20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03750
Dimensions: 1/16
Weight: 0.05

Universal adapter wire with male round and female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03751
Weight: 0.05

Collector box and electrode assembly. Tongue style burner mounted collector box with ceramic electrode, 15” wire, and female round connector. Not designed to mount on original equipment burners. Fits our stainless steel burners with special mounting bracket only. Will NOT fit on cast iron burners.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03900
Material: ceramic
Weight: 0.2

Stainless steel wire grease cup holder for mini bucket #S15112 which has been discontinued and replaced with mini bucket # 4673-FC. This wire holder can also be used with tin cans for easy disposal of grease.
Made in USA

Part Number: S15111
Material: stainless steel
Weight: 0.02

Mini grease bucket used with wire holder S15111 for Fiesta model 30030-913.

Part Number: S15112
Weight: .03

Phenolic standoff spacer (1 1/2” x 1 1/8”) used between lid handle and the grill's lid for Fiesta model 30030-913.

Part Number: SP5001-40
Weight: .03

KNOB VALVE LARGE for Fiesta model 30030-913.

Part Number: SP11-7
Weight: 0.1

Wheel 6” plastic with 3/8” axle hole for Fiesta model 30030-913.

Part Number: 10892-608
Weight: 0.2

Wheel bolt 3.25” long; uses one hinge pin part number S21233 not included for Fiesta model 30030-913.

Part Number: 10240-13
Weight: .10

Genuine OEM Fiesta chrome steel warming rack for Fiesta model 30030-913.
TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive early Aug.

Part Number: SP5022-3
Dimensions: 25 3/8”
Material: chrome steel
Weight: 2.5

LOGO GUAGE FIESTA A/T LID for Fiesta model 30030-913.

Part Number: SP23A-30
Weight: 0.5

HEAT SHIELD FIESTA 240/300 -- (2011) for Fiesta model 30030-913.

Part Number: SM5069-9
Dimensions: 8 3/8” x 18 3/8”
Weight: 1.46

Hinge pin clip for Fiesta model 30030-913.

Part Number: S21233
Weight: 0.01

LEG EXTENSION OFF-SET for Fiesta model 30030-913.

Part Number: 11494-148
Weight: 0.05

shishkebob skewers

Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Aluminum foil grilling trays. Package of three.

• Heavy duty aluminum foil
• Re-usable
• Great for grilling delicate foods like fish and veggies

Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4

Replacement heads for grill brush 77600. Set of two.

Part Number: 77650
Weight: 0.3