Charmglow CC-1 right

Standard stainless steel burner and venturi assembly. For Charmglow CC series and others with right-side controls. Includes:

• One (1) ESB Stainless steel H burner with adjustable legs
• One (1) V-6 single venturi
• All necessary gasket sand screws

Part Number: ESB+V-6
Dimensions: 7 3/4” x 15 1/2”
Material: stainless steel
Weight: 2.5

Deluxe stainless steel single-venturi burner and venturi assembly. Includes:

• SB stainless steel H burner.
• Deluxe burners have a special spot-welded mounting bracket for optional IG-5B universal tongue-style collector box and electrode. The IG-5B can be used in applications where the factory ignition system is irrepairable, non existant, or otherwise unusable.
• One (1) V-6 single venturi.
• Venturi gasket and mounting nuts (venturi mounts with nuts and bolts, not screws).
• 5 year MHP limited warranty.
• Click here for features of MHP deluxe SS burner.

Part Number: SB+V-6
Dimensions: 8 1/8” x 16”
Material: stainless steel
Weight: 1.5

Cooking Grid Stainless Steel AMK-CC for Charmglow model CC-1 right.

Part Number: CG-10SS
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 17 1/4”
Material: stainless steel
Weight: 5.40

Chrome plated cooking grid. Made in USA .

Part Number: CG-22
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 18 3/8”
Material: Chrome steel
Weight: 3.5

carbon steel rock grate for Charmglow model CC-1 right.

Part Number: 92001
Dimensions: 13 1/4” x 17 3/4”
Material: steel wire
Weight: 3.4

20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03750
Dimensions: 1/16
Weight: 0.05

Universal adapter wire with male round and female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03751
Weight: 0.05

Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20” wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-5B
Weight: 0.3

Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-15B
Weight: 0.3

Silver face control valve knob. Fits Charmglow C.C. series right side.

• Off position D-Value: 12:00 o'clock
• Knob diameter: 2”
• Socket diameter: 8mm
• Knob shaft: 1/2”

Part Number: CH-00213
Dimensions: 2
Weight: 0.1

Silver face valve knob. Fits Charmglow C.C. series right side.

• Off position D-Value: 12:00 o'clock
• Knob diameter: 2”
• Socket diameter: 8mm
• Knob shaft: 1/2”

Part Number: K-3B
Dimensions: 2
Material: N/A
Weight: 0.1

All purpose warming rack for Charmglow model CC-1 right.

Replaces Charmglow factory part# 44350

Part Number: AP-2
Dimensions: 4 5/8” x 19 3/4”
Material: Chrome steel
Weight: 1.0

Brass spud orifice with 11/32” x 32 thread size. Has #70 starter hole. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 33200
Dimensions: 0 7/16” x 0 7/16”
Material: brass
Weight: 0.01

Brass manifold for Charmglow model CC-1 for Charmglow model CC-1 right.

Part Number: 38300
Dimensions: 2 11/16” x 1 9/16”
Material: brass
Weight: 0.5

Single Charmglow AMK and CC-1 LP gas valve. Includes #53 orifice. Accepts 11/32” x 32 threaded orifice, part number 33200, drilled to size. Approximate dimensions 2 11/16” x 2 1/4”.

Part Number: VLV-9
Material: Brass
Weight: 0.30

Durable 2 5/16” round briquettes

• Self-cleaning
• Control flare-ups while holding an even heat pattern.
• About 53 pieces, covers approximately 275 sq. inches.
• Fits all gas grills

Part Number: BQ-5
Weight: 7.2

Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.

Part Number: 45887
Material: pummise
Weight: 7.0

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

Ceramic briquettes 48 pieces. Fits briquette trays 94751, 92571 and and simular trays. Works in all grills designed for briquettes or lava rock. Each briquette measures 2” x 2” x 3/4".

Part Number: 41648
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.5

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Upright porcelain steel roasting rack with grid topper.

Part Number: 40935
Weight: 2.9

Deluxe venturi brush with 11” coil spring flexible shaft

Part Number: 77310
Weight: 0.3