Valves, Orifices, and Manifolds for Charmglow grills

Neoprene valve gasket for clamp-on gas control valves for some Charmglow grills. 19mm.

Part Number: 00019
Dimensions: 0 1/2” x 0 1/4”
Material: neoprene
Weight: 0.01

1/8” FPT to replace hood orifice x 1/8” female compression fitting for some Charmglow grills. Use with MCM valve 36800 for models that use a valve stud mount and female compression fitting with MCM 3692L or 3692N 1/4” aluminum tubing.

Part Number: 30068
Material: brass
Weight: 0.1

Brass orifice for some Charmglow grills. 6mm x 3/4” cone shaped orifice with #64 drill size starter hole. For Electec and other clamp-on valves. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 31400
Dimensions: 0 3/4” x 0 5/16”
Material: brass
Weight: 0.01

Brass spud orifice with 5/16” x 32 thread size for some Charmglow grills. Has #70 starter hole. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 31600
Dimensions: 0 3/8” x 0 7/16”
Material: brass
Weight: 0.01

Brass blunt-end hood orifice drilled to #64 starter hole for some Charmglow grills. Fits valve 3701C, others. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 31700
Dimensions: 0 15/16” x 0 9/16”
Material: brass
Weight: 0.1

Brass spud orifice with 11/32” x 32 thread size for some Charmglow grills. Has #70 starter hole. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 33200
Dimensions: 0 7/16” x 0 7/16”
Material: brass
Weight: 0.01

Single Charmglow HEJ LP gas valve for some Charmglow grills. Includes #49 orifice. Accepts 11/32” x 32 threaded orifice, MCM 33200, drilled to size.

Part Number: 35200
Dimensions: 2 11/16” x 2 3/16”
Material: brass
Weight: 0.5

Charmglow LP gas plumbing tube with male compression fitting for some Charmglow grills.

• Set of two
• Includes orifices (LP) and brass compression fittings
• For use with valve 36000
• Provided straight, bend to fit

Part Number: 3601L
Dimensions: 5 1/2
Material: aluminum
Weight: 0.1

Charmglow natural gas plumbing tube with male compression fitting for some Charmglow grills.

• Set of two
• Includes orifices (natural) and brass compression fittings
• For use with valve 36000
• Provided straight, bend to fit

Part Number: 3601N
Dimensions: 5 1/2
Material: aluminum
Weight: 0.1

Natural gas plumbing tube for Charmglow 9250 with male compression fitting and #46 orifice for use with valve 36000 for some Charmglow grills. One pair. Provided straight; bend to fit.

Part Number: 3602N
Dimensions: 13
Material: aluminum
Weight: 0.2

Twin valve assembly to replace Charmglow OEM part #3512-0103, #3512-0104, #3512-0105, #3512-0101 for some Charmglow grills. Includes left and right valve and manifold. Orifice not included, use original or 11/32-32 blank drilled to size.

Part Number: 36500
Material: brass
Weight: 0.7

Charmglow LP gas 1/4” aluminum plumbing tubes with female compression fittings and #54 orifice for use with valve 36900 for some Charmglow grills. Set of two. Sold straight; bend to fit.

Part Number: 3692L
Dimensions: 6
Material: aluminum
Weight: 0.1

Charmglow natural gas 1/4” aluminum plumbing tubes with female compression fittings and #46 orifice for use with valve 36900 for some Charmglow grills. Set of two. Sold straight; bend to fit.

Part Number: 3692N
Dimensions: 6
Material: aluminum
Weight: 0.2

Right valve of assembly 37000 for some Charmglow grills. Replaces right side of Sunbeam OEM part #3512-0100. Orifice not included. Use original or 11/32” x 32 replacement. Also fits pre-1995 Fiesta models. D-Value is 6 o'clock

Part Number: 37400
Material: brass
Weight: 0.3

Brass manifold for Charmglow model CC-1 for some Charmglow grills.

Part Number: 38300
Dimensions: 2 11/16” x 1 9/16”
Material: brass
Weight: 0.5

Valve with 45° angled orifice snout built to accept 11/32 x 32 threaded spud type orifice (not provided); uses orifice # 33200 for some Charmglow grills. Mounts to the right side of original up-front control manifold assembly. Valve stem is 8mm, and needs a knob with a 9 D-value. Can use with universal knobs 00110 or 00310 or 01800 depending on needed knob stem length.

Part Number: 38600
Dimensions: 3 9/16” x 1 1/4”
Material: brass
Weight: 0.4

45° angled valve with extra long orifice snout for some Charmglow grills. Accepts 11/32” x 32 threaded spud orifice (not included, see part# 33200). Mounts to left side of T manifold 38400. (39000 mounts to right side). Assembly MCM 32354 replaces Sunbeam OEM #40-2354.

Part Number: 38900
Material: brass
Weight: 0.3

#63 orifice for infrared burner CLA-BL0229; use on liquid propane (LP) gas grills for some Charmglow grills. Includes brass elbow with 1/4” compression fitting.

Part Number: CLA-VB0245
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

#55 orifice for infrared burners use on natural Gas grills for some Charmglow grills. Includes brass elbow with 1/4” compression fitting.

Part Number: CLA-VB0246
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

Flame thrower valve for natural gas for some Charmglow grills. 15,000 BTU.

• Orifice included
• 30° angle
• Includes clamp and screws

Part Number: CLA-VN0232
Dimensions: 4 1/8
Material: aluminum/brass
Weight: 0.50

Single Charmglow AMK and CC-1 LP gas valve for some Charmglow grills. Includes #53 orifice. Accepts 11/32” x 32 threaded orifice, part number 33200, drilled to size. Approximate dimensions 2 11/16” x 2 1/4”.

Part Number: VLV-9
Material: Brass
Weight: 0.30