Charmglow AMK

Deluxe stainless steel single-venturi burner and venturi assembly. Includes:

• SB stainless steel H burner.
• Deluxe burners have a special spot-welded mounting bracket for optional IG-5B universal tongue-style collector box and electrode. The IG-5B can be used in applications where the factory ignition system is irrepairable, non existant, or otherwise unusable.
• One (1) V-1 7” plated steel straight single venturi
• Venturi gasket and mounting nuts (venturi mounts with nuts and bolts, not screws).
• 5 year MHP limited warranty.
• Click here for features of MHP deluxe SS burner.

Part Number: SB+V-1
Dimensions: 8 1/8” x 16”
Material: stainless steel
Weight: 2.5

Stainless steel burner and venturi assembly kit. Comes with all necessary gaskets and screws.

Part Number: 10101-70301
Dimensions: 15 7/8” x 8”
Material: stainless steel
Weight: 3.0

Stainless steel burner for Charmglow model AMK.

Part Number: 10101
Dimensions: 15 7/8” x 8”
Material: stainless steel
Weight: 2.1

Standard stainless steel burner and venturi assembly. Includes:

• One (1) ESB stainless steel H burner with adjustable legs
• One (1) V-1 single 7” straight venturi
• All necessary gaskets and screws.

Part Number: ESB+V-1
Dimensions: 7 3/4” x 15 1/2”
Material: stainless steel
Weight: 2.5

straight adjustable single venturi. Includes all necessary gaskets and screws/nuts.

Part Number: 70301
Dimensions: 7
Material: zinc plated steel
Weight: 0.5

Single Gasket Kit Economy Burners for Charmglow model AMK.

Part Number: SHK4
Weight: 0.01

Cooking Grid Stainless Steel AMK-CC for Charmglow model AMK.

Part Number: CG-10SS
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 17 1/4”
Material: stainless steel
Weight: 5.40

Chrome plated cooking grid. Made in USA .

Part Number: CG-22
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 18 3/8”
Material: Chrome steel
Weight: 3.5

carbon steel rock grate for Charmglow model AMK.

Part Number: 92001
Dimensions: 13 1/4” x 17 3/4”
Material: steel wire
Weight: 3.4

20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03750
Dimensions: 1/16
Weight: 0.05

Universal adapter wire with male round and female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03751
Weight: 0.05

Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20” wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-5B
Weight: 0.3

Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-15B
Weight: 0.3

Silver face control valve knob. Fits Charmglow C.C. series right side.

• Off position D-Value: 12:00 o'clock
• Knob diameter: 2”
• Socket diameter: 8mm
• Knob shaft: 1/2”

Part Number: CH-00213
Dimensions: 2
Weight: 0.1

Silver face valve knob. Fits Charmglow C.C. series right side.

• Off position D-Value: 12:00 o'clock
• Knob diameter: 2”
• Socket diameter: 8mm
• Knob shaft: 1/2”

Part Number: K-3B
Dimensions: 2
Material: N/A
Weight: 0.1

All purpose warming rack for Charmglow model AMK.

Replaces Charmglow factory part# 44350

Part Number: AP-2
Dimensions: 4 5/8” x 19 3/4”
Material: Chrome steel
Weight: 1.0

Brass spud orifice with 11/32” x 32 thread size. Has #70 starter hole. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 33200
Dimensions: 0 7/16” x 0 7/16”
Material: brass
Weight: 0.01

Single Charmglow AMK and CC-1 LP gas valve. Includes #53 orifice. Accepts 11/32” x 32 threaded orifice, part number 33200, drilled to size. Approximate dimensions 2 11/16” x 2 1/4”.

Part Number: VLV-9
Material: Brass
Weight: 0.30

Durable 2 5/16” round briquettes

• Self-cleaning
• Control flare-ups while holding an even heat pattern.
• About 53 pieces, covers approximately 275 sq. inches.
• Fits all gas grills

Part Number: BQ-5
Weight: 7.2

Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.

Part Number: 45887
Material: pummise
Weight: 7.0

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

Durable 2 5/16” round briquettes

• Self-cleaning
• Control flare-ups while holding an even heat pattern.
• About 53 pieces, covers approximately 275 sq. inches.
• Fits all gas grills

Part Number: BQ-5
Weight: 7.2

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Cast aluminum griddle

Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0

Deluxe venturi brush with 11” coil spring flexible shaft

Part Number: 77310
Weight: 0.3