Broil-Mate 7835-44

Genuine OEM Broil-Mate stainless steel burner replaces original part number 52904-144 (52904-144LP and 52904-144NG). For LP grills, adjust air shutter to about 1/3 opened and for NG adjust about 2/3 open or more as needed.

Part Number: 52924-144
Dimensions: 15 3/4
Material: stainless steel
Weight: 0.8

Rear burner tubular with deflector; includes collector box, electrode and connector wire for Broil-Mate model 7835-44.

Part Number: 27906-354
Dimensions: 32
Weight: 1.0

Genuine OEM Broil-Mate Side Burner. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).

Part Number: 10390-E10
Weight: 0.4

COOKING GRID SINGLE SS 330/440/550; SOLD INDIVIDUALLY for Broil-Mate model 7835-44.

Part Number: 52005-284
Dimension Front-to-Back: 17 7/16”
Dimension Side-to-Side: 6 5/16”
Material: stainless steel
Weight: 3.2

Genuine OEM Broil-Mate stainless steel Flav-R-Wave for Broil-Mate model 7835-44.

Part Number: 52209-404
Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 6”
Material: stainless steel
Weight: 1.14

FIREBOX 550 HEAT SHIELD FRONT for Broil-Mate model 7835-44.

Part Number: 52066-91
Weight: 1.0

COLLECTOR BOX 550 UPPER 430SS

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 52216-014
Dimensions: 28
Weight: 0.2

Genuine OEM Broil-Mate push-button electronic ignitor.

• 5 spark outlets (spade connectors)
• Uses AAA battery (not included)
• Requires 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-251
Weight: 0.5

Genuine OEM Broil-Mate electrode with 14 3/8” connector wire that has a spade female end; use with AA or AAA battery powered ignitors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-E13
Weight: 0.05

Genuine OEM Broil-Mate 32” wire for side burner and other applications. Both ends are female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T18
Dimensions: 32
Weight: 0.05

Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY

Part Number: 27249-904
Dimensions: 6 1/2” x 6”
Material: stainless steel
Weight: .35

GREASE PAN - 330/440/550 for Broil-Mate model 7835-44.

Part Number: 52009-901
Dimensions: 5 1/8” x 6 1/2”
Weight: .40

CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP for Broil-Mate model 7835-44.

Part Number: 10472-K431
Weight: 0.1

CONTROL KNOB SMALL W/BA STRIP.

• Off position D-Value: 6 o'clock
• Knob diameter: 1 7/8”
• Socket diameter: 5/16”
• Knob shaft: 1/2”

Part Number: 10472-K231
Weight: 0.1

Rubber castor, 3” w/plate, locking for Broil-Mate model 7835-44.

Part Number: 10892-23
Weight: 0.66

VALVE ASSEMBLY 5V W/SB RB LP for Broil-Mate model 7835-44.

Part Number: 59006-074
Weight: 1.0

Genuine OEM Broil-Mate Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.

Part Number: 10571-6
Weight: 0.12

Washer for Broil-Mate model 7835-44.

Part Number: S21255
Weight: 0.01

Hinge pin clip for Broil-Mate model 7835-44.

Part Number: S21233
Weight: 0.01

REAR BURNER SPRING for Broil-Mate model 7835-44.

Part Number: S21362
Weight: 1.0

SCREW-PHCP 6-32X1/4 TY-F JS500 for Broil-Mate model 7835-44.

Part Number: Y-12835
Weight: 1.0

LID BUMPER for Broil-Mate model 7835-44.

Part Number: Y-11231
Weight: 0.01

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Upright porcelain steel roasting rack with grid topper.

Part Number: 40935
Weight: 2.9

Deluxe venturi brush with 11” coil spring flexible shaft

Part Number: 77310
Weight: 0.3