Broil-Mate Knobs and Handles
Universal control knob with with long 1” shaft for some Broil-Mate grills. Counter-clockwise bezel.
- The adhesive-backed knob face can be attached to the knob in any position, which allows the knob to have OFF at the top, bottom, or wherever necessary. Simply stick the knob face in the position reguired for your grill
- Off position D-Value: Selectable (12, 3, 6, or 9 o'clock)
- Knob diameter: 2”
- Socket diameter: 8mm
- Knob shaft: 1 inch
Part Number: 00110
Dimensions: 2” x 2”
Material: plastic
Weight: 0.1
$6.55
Universal control knob for some Broil-Mate grills. Counter-clockwise bezel.
- The adhesive-backed knob face can be attached to the knob in any position, which allows the knob to have OFF at the top, bottom, or wherever necessary. Simply stick the knob face in the position reguired for your grill
- Off position D-Value: Selectable
- Knob diameter: 2 1/16”
- Socket diameter: 8mm
- Knob shaft: 1/2”
Part Number: 00310
Dimensions: 2 1/16” x 2 1/16”
Material: plastic
Weight: 0.1
$6.55
Universal 24” hardwood front lid handle for some Broil-Mate grills. Designed to bolt through existing lid holes, if present. Sliding mounting hardware can adjust to holes up to 23” apart.
Part Number: 01200
Dimensions: 24
Material: Wood
Weight: 0.8
$19.55
Universal black control knob for some Broil-Mate grills. Counter-clockwise bezel.
- Off position D-Value: Selectable
- Knob diameter: 2 1/16”
- Socket diameter: 8mm
- Knob shaft: None
Part Number: 01800
Dimensions: 2 1/16” x 2 1/16”
Material: plastic
Weight: 0.05
$6.55
Universal 2 5/16” knob for some Broil-Mate grills.
- Selectable D-Value
- Selectable socket diameter - 6mm or 8mm.
- Selectable shaft length - flush, 1/4”, or 1 5/8”. Shafts can also be trimmed to desired length.
- Includes 6 shaft inserts and set screw.
- Fits any grill with inside bezel diameter greater than 2 5/16” (the knob diameter).
Part Number: 02342
Dimensions: 2 5/16” x 2 5/16”
Material: plastic
Weight: 0.20
$16.93
Stainless steel lid handle with rubber holding area that replaces resin lid handle 30230230; includes mounting brackets and two screws for some Broil-Mate grills.
Part Number: 10070-E13A
Weight: .85
$27.92
| |
|
Handle heat shield installs onto the body of the grill before installing the handle for some Broil-Mate grills. (Used with handle 24005-12AB when replacing handle 10184-70).
Part Number: 10184-E124
Weight: 1.0
Image not available
$18.95
| |
|
HANDLE HEAT SHIELD 3B + for some Broil-Mate grills.
Part Number: 10184-E39
Weight: 1.0
Image not available
$8.70
| |
|
OEM HANDLE W/STRAP EVOLUTION 400 has been discontinued and replaced with handle 24005-12AB and handle heat shield 10184-E124 for some Broil-Mate grills. When ordering 10184-E704, your order will contain the two replacement part numbers.
Part Number: 10184-E704
Weight: 1.85
$28.06
| |
|
Phenolic handle stand-off for left hand side for some Broil-Mate grills.
Part Number: 10239-390
Weight: 0.1
$2.23
| |
|
Phenolic handle stand-off for right hand side for some Broil-Mate grills.
Part Number: 10239-391
Weight: 0.1
$2.23
| |
|
Triangular handle washer for some Broil-Mate grills. 1/8 in thick. Made of heat resistant compressed material.
Part Number: 10239-7
Dimensions: 1 1/2” x 1 1/4”
Weight: 0.05
$1.95
| |
|
KNOB SIDE BURNER for some Broil-Mate grills.
Part Number: 10472-71-2
Weight: 0.1
Image not available
$5.15
| |
|
CONTROL KNOB - BEZEL BLK for some Broil-Mate grills.
Part Number: 10472-E38
Weight: 0.1
Image not available
$5.15
| |
|
CONTROL KNOB SMALL W/BA STRIP for some Broil-Mate grills.
- Off position D-Value: 6 o'clock
- Knob diameter: 1 7/8”
- Socket diameter: 5/16”
- Knob shaft: 1/2”
Part Number: 10472-K231
Weight: 0.1
$5.15
| |
|
Genuine OEM Broil-Mate control knob for some Broil-Mate grills.
- Off position D-Value: 6 o'clock
- Knob diameter: 1 5/8”
- Socket diameter: 5/16”
- Knob shaft: 1/2”
Part Number: 10472-K36
Weight: 0.05
$5.48
| |
|
Genuine OEM Broil-Mate rotary igniter knob for some Broil-Mate grills.
Part Number: 10472-K40
Weight: 0.1
$5.15
| |
|
CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP for some Broil-Mate grills.
Part Number: 10472-K431
Weight: 0.1
$5.15
| |
|
DOOR HANDLE RESIN * for some Broil-Mate grills.
Part Number: 21475-138
Weight: 1.0
$6.73
| |
|
Genuine OEM Broil-Mate small control knob for some Broil-Mate grills.
- Off position D-Value: 6 o'clock
- Knob diameter: 1 7/8”
- Socket diameter: 5/16”
- Knob shaft: 1/2”
Part Number: 22001-668
Weight: 0.1
$12.32
| |
|
Genuine OEM Broil-Mate silver control knob for some Broil-Mate grills.
There has been some confusion regarding the knob part numbers caused by revisions by the manufacturer. Basically, for the models whose owners manual shows part# 22002-966 or 22002-968, pick 22002-96 if you need a silver knob; pick 22002-966 if you need a black knob.
- Off position D-Value: 6 o'clock or 12 o'clock (no on/off mark)
- Knob diameter: 2 1/4”
- Socket diameter: 8mm
- Knob shaft: 1/2 inch
Part Number: 22002-96
Weight: 0.1
$8.78
| |
|
CONTROL KNOB CHROME - SMALL for some Broil-Mate grills.
Part Number: 22004-96
Weight: 0.1
Image not available
$5.15
| |
|
LID-HANDLE BENT 500 430 SS for some Broil-Mate grills. NOTE: The mounting holes, center to center, are 23 1/2” apart.
Part Number: 24005-12A
Dimensions: 25
Weight: .85
$25.86
| |
|
Lid handle bent 500 assembly for some Broil-Mate grills. Mounting holes center to center about 23 5/8”. (Used with handle heat shield 10184-E124 when replacing handle 10184-E70.)
Part Number: 24005-12AB
Dimensions: 25 1/2
Weight: 1.10
Image not available
$28.06
| |
|
Universal hardwood lid handle for some Broil-Mate grills.
Part Number: 25950
Material: wood
Weight: 0.3
$17.30
Universal control knobs, set of two knobs, includes eight (8) shaft inserts to accomodate valve stem diameters of approximately 5/6” and 1/4” for some Broil-Mate grills.
- Off position D-Value: 12 or 6 or 3 or 9 o'clock
- Knob diameter: 2 3/16”
- Insert socket diameters: 8.25mm (.32”) and 6.10mm (.24”)
- Knob shaft: Flat or 1”
Part Number: 25960
Weight: 0.20
$15.67
HANDLE INSERT-REGAL 440/500 * for some Broil-Mate grills.
Part Number: 26005-305
Weight: 1.0
Image not available
$4.86
| |
|
LID HANDLE 4B GPB for some Broil-Mate grills.
Part Number: 338-C500
Weight: 1.0
Image not available
$18.73
| |
|
Genuine OEM Broil-Mate control knob bezel for some Broil-Mate grills.
Part Number: 472-C500
Weight: 0.03
$5.15
| |
|
Control knob for some Broil-Mate grills.
- Off position D-Value: 6 or 12 o'clock
- Knob diameter: 2 1/8”
- Socket diameter: 5/16”
- Knob shaft: None
Part Number: 472-C501
Weight: 0.1
$7.29
| |
|
CONTROL KNOB SB/RB BEZEL GPB (same as control knob bezel # 472-C500) for some Broil-Mate grills.
Part Number: 472-C502
Weight: 0.05
$5.15
| |
|
KNOB GAS VALVE SMALL for some Broil-Mate grills.
Part Number: 50479-168
Weight: 0.1
$5.15
Universal stainless steel lid handle for some Broil-Mate grills. Adjusts from 21” hole centers, down to 10”. Includes mounting hardware. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-MS0055
Dimensions: 23 5/8
Material: stainless steel
Weight: 1.0
$45.35
S/B LID HANDLE WAGON ENCLOSER* for some Broil-Mate grills.
Part Number: PB20-60
Weight: 1.0
$1.95
| |
|
Universal durable black phenolic lid handle with threaded brass insert for some Broil-Mate grills. (1/4” x 20 thread). Includes mounting bolt and lockwasher. Made for Ducane but makes a great universal lid handle that can be used on almost any grill.
Part Number: PH-2B
Dimensions: 3 1/2
Material: 6.59
Weight: .3
$8.12
KNOB VALVE LARGE for some Broil-Mate grills.
Part Number: SP11-7
Weight: 0.1
Image not available
$5.15
| |
|
Phenolic standoff spacer (1 1/2” x 1 1/8”) used between lid handle and the grill's lid for some Broil-Mate grills.
Part Number: SP5001-40
Weight: .03
Image not available
$2.89
| |
|
USA shipping (contiguous 48 states only) on all Broil-Mate part orders $49 and over