Broil-Mate 765064

Genuine OEM Broil-Mate stainless steel burner replaces original part number 52904-144 (52904-144LP and 52904-144NG). For LP grills, adjust air shutter to about 1/3 opened and for NG adjust about 2/3 open or more as needed.

Part Number: 52924-144
Dimensions: 15 3/4
Material: stainless steel
Weight: 0.8

Genuine OEM Broil-Mate Side Burner. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).

Part Number: 10390-E10
Weight: 0.4

COOKING GRID CAST IRON 330/440/550 (Sold individually; number required varies, check your grill.)

Part Number: 52002-181
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 12 3/4”
Material: cast iron
Weight: 6.75

Genuine OEM Broil-Mate stainless steel Flav-R-Wave for Broil-Mate model 765064.

Part Number: 52209-404
Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 6”
Material: stainless steel
Weight: 1.14

Genuine stainless steel two piece collector box assembly. Consists of both upper and lower pieces.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 52225-014A
Dimensions: 23
Material: stainless steel
Weight: 1.0

Genuine OEM Broil-Mate electrode with 11” connector wire that has a flat/spade female end; use with AA or AAA battery powered ignitors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive early Aug.

Part Number: 10342-E12
Weight: 0.05

Genuine OEM Broil-Mate electronic push-button 3-spade igniter.

• Uses AAA battery (not included)
• .Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-246
Weight: 0.6

Genuine OEM Broil-Mate 32” wire for side burner and other applications. Both ends are female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T18
Dimensions: 32
Weight: 0.05

Grease tray 440; porcelain flatte matte finish for Broil-Mate model 765064.

Part Number: 57055-901
Dimensions: 6 3/4” x 25 7/16”
Material: porcelain steel
Weight: 1.25

GREASE PAN - 330/440/550 for Broil-Mate model 765064.

Part Number: 52009-901
Dimensions: 5 1/8” x 6 1/2”
Weight: .40

Genuine OEM Broil-Mate Porcelain Grease Pan for Broil-Mate model 765064.

Part Number: 22009-901
Dimensions: 6 1/2” x 5 1/8”
Weight: .45

LID-HANDLE BENT 500 430 SS. NOTE: The mounting holes, center to center, are 23 1/2” apart.

Part Number: 24005-12A
Dimensions: 25
Weight: .85

CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP for Broil-Mate model 765064.

Part Number: 10472-K431
Weight: 0.1

CONTROL KNOB SMALL W/BA STRIP.

• Off position D-Value: 6 o'clock
• Knob diameter: 1 7/8”
• Socket diameter: 5/16”
• Knob shaft: 1/2”

Part Number: 10472-K231
Weight: 0.1

24” LP hose and regulator with QCC-1 connection.

• For use on ”new style” QCC-1 tanks.
• Consists of hose part# 01000 and regulator part# 00920.
• Hose end with SAE 3/8” female flare fitting connects to grill.

Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. See our flare fitting description for information on measuring and sizes.

Part Number: 80012
Dimensions: 23 1/2” x 0 1/2”
Weight: 0.80

Wheel 6” plastic with 3/8” axle hole for Broil-Mate model 765064.

Part Number: 10892-608
Weight: 0.2

Wheel bolt 3.25” long; uses one hinge pin part number S21233 not included for Broil-Mate model 765064.

Part Number: 10240-13
Weight: .10

WARMING RACK 440 PORC (back support rod 25 5/8” and front support rod 26 3/16” warming rack 7 3/8” x 25”) for Broil-Mate model 765064.

Part Number: 52005-991
Dimensions: 25 5/8
Weight: 3.3

Genuine OEM Broil-Mate Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.

Part Number: 10571-6
Weight: 0.12

Cotter pin for Broil-Mate model 765064.

Part Number: Y-11230
Weight: 0.01

Hinge pin clip for Broil-Mate model 765064.

Part Number: S21233
Weight: 0.01

SCREW-PHCP 6-32X1/4 TY-F JS500 for Broil-Mate model 765064.

Part Number: Y-12835
Weight: 1.0

LID BUMPER for Broil-Mate model 765064.

Part Number: Y-11231
Weight: 0.01

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Stainless steel chicken roaster. Commonly called Beer Can roasters.

• The best way to roast poultry on the grill
• For use in barbecues and ovens
• Dishwasher safe
• Includes rack, rack support, and basting brush

Part Number: 41333
Material: stainless steel
Weight: 0.10

Deluxe venturi brush with 11” coil spring flexible shaft

Part Number: 77310
Weight: 0.3