Broil-Mate 1164-57S

Genuine OEM Broil-Mate stainless steel main tube burner. For natual gas/NG the air shutter should be open about 2/3.

Part Number: 52904-E400NG
Dimensions: 14 1/2
Weight: 1.0

Genuine OEM Broil-Mate cast iron cooking grid, single panel.

• Sold individually.
• Number required varies.
• Porcelain treated matte finish.

Part Number: 38170121
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 12 3/4”
Material: Cast Iron
Weight: 5.55

Genuine OEM Broil-Mate stainless steel cooking grid. SOLD INDIVIDUALLY. Number required varies, check your grill to be sure.

Part Number: 10225-E404
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 12 3/4”
Material: Stainless steel
Weight: 5.10

Genuine OEM Broil-Mate reversible heavy cast iron cooking grid SOLD INDIVIDUALLY.

• Sold individually
• Number required varies, check your grill
• Porcelain treated, flat matte finish
• Pointed side is designed for perfect sear marks
• Grooved side captures juices for continuous basting

Note: See part 10225-E404 for a stainless steel version of this grid.

Part Number: 10225-T436
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 12 3/4”
Material: Cast iron
Weight: 7.6

Stainless steel steel cooking grid. Made in USA .

Part Number: CG-52SS
Dimension Front-to-Back: 15 1/16”
Dimension Side-to-Side: 25 1/4”
Material: stainless steel
Weight: 6.9

Genuine OEM Broil-Mate electronic push-button 2-spade igniter.

• Uses AAA battery (not included)
• .Requires 3/4” mounting hole
• Also replaces part# 10342-242 and 10342-249

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-245
Weight: 0.3

Genuine OEM Broil-Mate electrode with 11” connector wire that has a flat/spade female end; use with AA or AAA battery powered ignitors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive early Aug.

Part Number: 10342-E12
Weight: 0.05

GREASE PAN - 330/440/550 for Broil-Mate model 1164-57S.

Part Number: 52009-901
Dimensions: 5 1/8” x 6 1/2”
Weight: .40

CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP for Broil-Mate model 1164-57S.

Part Number: 10472-K431
Weight: 0.1

Lid handle bent 500 assembly. Mounting holes center to center about 23 5/8”. (Used with handle heat shield 10184-E124 when replacing handle 10184-E70.)

Part Number: 24005-12AB
Dimensions: 25 1/2
Weight: 1.10

Genuine OEM Broil-Mate NG gas hose for Broil-Mate model 1164-57S.

Part Number: 10111-K45
Weight: 2.1

Genuine OEM Broil-Mate 7” cart wheel with 3/8” axel hole. Mini hub cap is # 00400251, sold separately.

Part Number: 10892-7G
Weight: .45

Genuine OEM Broil-Mate twin wheel swivel castor, approximately 2 3/8 inch for Broil-Mate model 1164-57S.
TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive early Aug.

Part Number: 10892-13
Weight: 0.35

ROTISSERIE SHIELD BRACKET FOR RIGHT SIDE WITH TWO MOUNTING HOLES for Broil-Mate model 1164-57S.

Part Number: 10184-E43
Weight: .20

ROTISSERIE SHIELD BRACKET FOR LEFT SIDE WITH ONE MOUTNING HOLE for Broil-Mate model 1164-57S.
TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive early Aug.

Part Number: 10184-E44
Weight: .20

Genuine OEM Broil-Mate Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.

Part Number: 10571-6
Weight: 0.12

Hinge pin clip for Broil-Mate model 1164-57S.

Part Number: S21233
Weight: 0.01

ALIGNMENT, BRACKET BLACK for Broil-Mate model 1164-57S.

Part Number: 10184-E691
Weight: 1.0

Push nut 3/8 for Broil-Mate model 1164-57S.

Part Number: S21420
Weight: 0.1

shishkebob skewers

Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4

Deluxe 17” stainless steel turner.

• Soft comfort rubber grip
• Stainless steel blade

Part Number: 43108
Material: stainless steel
Weight: 0.10

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Upright porcelain steel roasting rack with grid topper.

Part Number: 40935
Weight: 2.9

deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.

Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7