Broil-Mate 1157-84CA

Genuine OEM Broil-Mate stainless steel burner and venturi assembly. Includes burner-mounted igniter electrode and wire part# S15500. Fully assembled.

Part Number: S10017
Dimensions: 8” x 20 1/2”
Material: Stainless steel
Weight: 3.5

Genuine OEM Broil-Mate stainless steel rotisserie burner assembly.

Includes:
• 26 3/16” SS rotisserie burner with deflector (part# S13005)
• Burner-mounted electrode, gas collector box, and 45” wire
• Completely assembled

Part Number: S13005A
Dimensions: 26 3/16”
Weight: 1.10

Genuine OEM Broil-Mate Side Burner. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).

Part Number: 10390-E10
Weight: 0.4

Genuine OEM Broil-Mate cast iron cooking grid, single panel.

• Sold individually.
• Number required varies.
• Porcelain treated matte finish.

Part Number: 38170121
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 12 3/4”
Material: Cast Iron
Weight: 5.55

Genuine OEM Broil-Mate side burner grid for Broil-Mate model 1157-84CA.

Part Number: 10225-T10
Dimension Front-to-Back: 14 1/4”
Dimension Side-to-Side: 8 3/8”
Weight: 2.4

Genuine OEM Broil-Mate stainless steel cooking grid. SOLD INDIVIDUALLY. Number required varies, check your grill to be sure.

Part Number: 10225-E404
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 12 3/4”
Material: Stainless steel
Weight: 5.10

Genuine OEM Broil-Mate reversible heavy cast iron cooking grid SOLD INDIVIDUALLY.

• Sold individually
• Number required varies, check your grill
• Porcelain treated, flat matte finish
• Pointed side is designed for perfect sear marks
• Grooved side captures juices for continuous basting

Note: See part 10225-E404 for a stainless steel version of this grid.

Part Number: 10225-T436
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 12 3/4”
Material: Cast iron
Weight: 7.6

Stainless steel steel cooking grid. Made in USA .

Part Number: CG-52SS
Dimension Front-to-Back: 15 1/16”
Dimension Side-to-Side: 25 1/4”
Material: stainless steel
Weight: 6.9

Genuine OEM Broil-Mate stainless steel Flav-R-Wave heat plate. Also replaces porcelain-steel part# 10222-T424, which has been discontinued by the manufacturer.

Part Number: 10222-T425
Dimension Front-to-Back: 11 1/4”
Dimension Side-to-Side: 23”
Material: Stainless steel
Weight: 3.0

Radiation shield for Broil-Mate model 1157-84CA.

Part Number: 10184-R80
Dimensions: 9 1/4” x 20 3/4”
Material: stainless steel
Weight: 1.72

Genuine OEM Broil-Mate electronic push-button 2-spade igniter.

• Uses AAA battery (not included)
• .Requires 3/4” mounting hole
• Also replaces part# 10342-242 and 10342-249

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-245
Weight: 0.3

Genuine OEM Broil-Mate collector box and electrode assembly. Includes

• burner mounted collector box (clip on)
• ceramic electrode and 18” wire with round connector and protective sleeve.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: S15500
Weight: 0.1

Genuine OEM Broil-Mate 28” wire for side burner. One female spade connector, one female round connector..

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T16
Dimensions: 28
Weight: 0.05

Genuine OEM Broil-Mate disposable grease pans. Package of 10. Each measures 4.75”x6”x1”.

Part Number: S15115
Dimensions: 4 3/4” x 6”
Material: aluminum
Weight: 0.25

S/B LID HANDLE WAGON ENCLOSER* for Broil-Mate model 1157-84CA.

Part Number: PB20-60
Weight: 1.0

Phenolic handle stand-off for left hand side for Broil-Mate model 1157-84CA.

Part Number: 10239-390
Weight: 0.1

Phenolic handle stand-off for right hand side for Broil-Mate model 1157-84CA.

Part Number: 10239-391
Weight: 0.1

24” LP hose and regulator with QCC-1 connection.

• For use on ”new style” QCC-1 tanks.
• Consists of hose part# 01000 and regulator part# 00920.
• Hose end with SAE 3/8” female flare fitting connects to grill.

Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. See our flare fitting description for information on measuring and sizes.

Part Number: 80012
Dimensions: 23 1/2” x 0 1/2”
Weight: 0.80

Genuine OEM Broil-Mate 7” cart wheel with 3/8” axel hole. Mini hub cap is # 00400251, sold separately.

Part Number: 10892-7G
Weight: .45

Genuine OEM Broil-Mate caster wheel; approximately 2 3/8” diameter for Broil-Mate model 1157-84CA.

Part Number: 10892-15
Weight: 0.35

CONTROL ASSY 50BTU 4V LP for Broil-Mate model 1157-84CA.

Part Number: 10442-T76
Weight: 1.0

Genuine OEM Broil-Mate Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.

Part Number: 10571-6
Weight: 0.12

Hinge pin clip for Broil-Mate model 1157-84CA.

Part Number: S21233
Weight: 0.01

Cotter pin for Broil-Mate model 1157-84CA.

Part Number: Y-11230
Weight: 0.01

ALIGNMENT, BRACKET BLACK for Broil-Mate model 1157-84CA.

Part Number: 10184-E691
Weight: 1.0

REAR BURNER SPRING for Broil-Mate model 1157-84CA.

Part Number: S21362
Weight: 1.0

Push nut 3/8 for Broil-Mate model 1157-84CA.

Part Number: S21420
Weight: 0.1

Genuine OEM Broil-Mate Cover, side burner for Broil-Mate model 1157-84CA.

Part Number: 10393-K40
Dimensions: 14 7/8” x 11”
Material: stainless steel
Weight: 1.9

SCREW-PHCP 6-32X1/4 TY-F JS500 for Broil-Mate model 1157-84CA.

Part Number: Y-12835
Weight: 1.0

Genuine OEM Broil-Mate End Cap, door. Left hand side, with magnet.

Part Number: 10184-E78A
Weight: 0.36

END CAP DOOR BOTTOM LEFT A for Broil-Mate model 1157-84CA.

Part Number: 10184-E76
Weight: .25

Genuine OEM Broil-Mate End Cap, door. RIght hand side, with magnet.

Part Number: 10184-E79A
Weight: 0.36

END CAP DOOR BOTTOM RIGHT A for Broil-Mate model 1157-84CA.

Part Number: 10184-E77
Weight: .25

Texas hickory flavor wood chips. 800g.

Part Number: 00220
Weight: 2.0

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

economy basting brushes. Two brushes, 7.5” long.

Part Number: 43054
Weight: 0.1

Upright porcelain steel roasting rack with grid topper.

Part Number: 40935
Weight: 2.9

Grill Mitt With Neoprene Palm.

16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most

Part Number: 90963
Weight: 0.5