Weber 4411001

Stainless steel cross-over tube for Silver A and Spirit 500 grills. See part# WTB3 for complete burner kit.

Part Number: WTB-SACT
Dimensions: 10 9/16”
Material: stainless steel
Weight: 0.15

Stainless steel front or rear burner for Weber Silver A and Spirit 500 models. See part# WTB3 for complete burner kit.

Part Number: WTB-SAF
Dimensions: 27”
Material: stainless steel
Weight: 1.0

Stainless steel burner kit. Includes:

• Two 27” tube burners
• One 10 1/2” stainless cross-over bar
• Spider exclusion screens on all burners

Part Number: 127A3
Dimensions: 27” x 10 1/2”
Material: stainless steel
Weight: 1.11

Premium quality heavy duty stainless steel cooking grid. Our USA-made premium stainless grids are simply the best obtainable. We have them manufactured here in the USA to our specifications and standards, which are high. Of course, they're not available anywhere else.

Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or coated carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best, you've found it. Just look at the weight of one of these grids, almost 6 pounds of solid stainless each.

• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods
• Dimensions: 15” x 11 1/8”
• Made in USA .
• Sold individually.

Part Number: CLA-GS0006
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 11 1/8”
Material: stainless steel
Weight: 5.8

Premium stainless steel cooking grid. Sold individually. Fits Weber Genesis Silver A, Sport 500, and Spirit E210.

Part Number: CG-82SS
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 11 5/16”
Material: 304 Stainless steele
Weight: 6.0

Premium quality stainless steel cooking grid. Far superior to the porcelain coated steel grids it replaces.

• Made in USA
• 304 commercial grade stainless steel
• Solid .225 diameter stainless rods
• Sold individually

Fits grill by Arkla, Arklamatic, Charbroil, Charmglow, Embermatic, Great Outdoors, Kenmore, Kmart, Martha Stewart, Roper, Vermont Castings, Weber. May fit others.

Part Number: 58671-SS
Dimension Front-to-Back: 14 3/4”
Dimension Side-to-Side: 21 1/2”
Material: Stainless steel
Weight: 5

Porcelain pressed steel cooking grids. Porcelain enameled, glossy finish. Sold as a set of two (2).

Part Number: 58682
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 22 3/4”
Material: porcelain pressed steel
Weight: 5.3

Commercial 304 grade stainless steel cooking grid with 1/4” diameter rods. Sold individually. Made in USA .

Part Number: CG-53SS
Dimension Front-to-Back: 14 3/4”
Dimension Side-to-Side: 21 1/2”
Material: Stainless steel
Weight: 5

Porcelain steel Flavoriser Bars. SET OF FIVE (5).

Part Number: 95345
Dimension Front-to-Back: 21 9/16”
Dimension Side-to-Side: 1 7/8”
Material: porcelain steel
Weight: 5.3

Heavy gauge stainless steel Flavoriser Bars for Weber Silver A and Spirit 500 model grills using a 5 bar system. SET OF FIVE (5).

Part Number: WFB-5S
Dimension Front-to-Back: ”
Dimension Side-to-Side: 21 9/16”
Material: stainless steel
Weight: 6.0

Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199C
Weight: 0.05

Push-Button self-grounding piezo spark generator; requiers 3/4” mounting hole. Primary connector is a round male connector, so connecting wire needs to be female round connector. If needed, see part# 03199C for a short adapter wire that converts flat female spade connectors to female round. Secondary connector is a flat male spade connector used to conduct spark to a secondary electrode, such as a side burner, or used as a ground in some applications. See ground wire part# 03620. For more information, see our article Ignition 101.

Part Number: 03120
Weight: 0.1

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

electrode assembly for use with Weber models with spark generators that have an external grounding prong. Includes mounting tabs to facilitate installation.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04800
Material: ceramic
Weight: 0.2

Snap In Piezo Ignitor. Fits Weber Genesis Silver A,B,C and Newer Spirit E310 & E320.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-9B
Weight: 0.2

Control knob with long shaft.

• Off position D-Value: 6 o'clock
• Knob diameter: 1 5/8”
• Socket diameter: 8mm
• Knob shaft: 1 1/4”

Part Number: 00120
Dimensions: 1 5/8” x 1 5/8”
Material: plastic
Weight: 0.1

HOW TO GRILL The Complete Illustrated Book of Barbecue Techniques. Steve Raichlen presents a full-color, step-by-step technique book that gets to the core of the grilling experience by showing and telling exactly how it's done. With more than 1,000 photographs, if features over 100 techniques and recipes, from how to set up a three-zone fire to how to grill a perfect prime rib, to grilling pizza, shellfish, vegetables, tofu, fruit, and s'mores.

Part Number: 0-7611-2014-9
Dimensions: 8” x 9 1/4”
Material: Paperback
Weight: 3.0

15” Stainless steel tong.

• Soft comfort grip
• Locking mechanism

Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Aluminum foil grilling trays. Package of three.

• Heavy duty aluminum foil
• Re-usable
• Great for grilling delicate foods like fish and veggies

Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4

Deluxe venturi brush with 11” coil spring flexible shaft

Part Number: 77310
Weight: 0.3