Warm Morning G-4 TXPL

Cast iron burner and venturi assembly kit. Comes with all necessary gaskets and screws.

Part Number: 20502-70401
Dimensions: 15 7/8” x 8”
Material: cast iron
Weight: 8.0

cast iron burner head for Warm Morning model G-4 TXPL.

Part Number: 20502
Dimensions: 15 7/8” x 8”
Material: cast iron
Weight: 7.7

Gasket kit. Round gasket fits all dual cast iron bowtie burners.

Part Number: DHK-3
Weight: 0.1

Stainless steel burner and venturi assembly kit. Contains one standard EDSB SS H burner and two V-12 adjustable universal venturis.

Part Number: EDSB+V-12
Dimensions: 7 1/4” x 15 1/2”
Material: stainless steel
Weight: 2.0

Stainless steel burner and venturi assembly kit. Comes with all necessary gaskets and screws.

Part Number: 10502-70401
Dimensions: 15 7/8” x 8”
Material: stainless steel
Weight: 3.0

Stainless steel H burner. Includes special bracket for optional 03900 burner-mounted collector box and electrode with wire. The 03900 electrode & box is a good solution for applications where the original OEM electrode cannot be used.

Part Number: 10502
Dimensions: 15 7/8” x 8”
Material: stainless steel
Weight: 2.5

Cast iron burner and venturi assembly kit. Comes with all necessary gaskets and screws.

Part Number: 22102-72102
Dimensions: 17 1/8” x 9 1/2”
Material: cast iron
Weight: 11.0

Cast iron bowtie burner for twin venturi grills for Warm Morning model G-4 TXPL.

Part Number: 22102
Dimensions: 17 1/4” x 9 1/2”
Material: cast iron
Weight: 10.13

two venturi gaskets with screws for Warm Morning model G-4 TXPL.

Part Number: 00400
Dimensions: 3 1/16” x 1 1/4”
Weight: 0.05

Straight adjustable single venturi.

• Adjusts from 7” to 10”.
• Requires minimum 1 7/8” hole in grill bottom for venturi to pass thru. For grills with smaller holes, see venturi part# 72401.
• Can be used in pairs for twin venturi applications.

. Includes all necessary gaskets and screws/nuts.

Part Number: 70401
Dimensions: 10
Material: zinc plated steel
Weight: 0.6

Single Gasket Kit Economy Burners for Warm Morning model G-4 TXPL.

Part Number: SHK4
Weight: 0.01

Straight fixed twin venturi. Includes all necessary gaskets and screws/nuts.

Part Number: 72102
Dimensions: 8 1/4
Material: zinc plated steel
Weight: 0.7

Spider exclusion screens. Installs over venturi air shutters to keep spiders out. Approximately 7/8” in diameter and 1” long.

Part Number: 70002
Dimensions: 1” x 7/8”
Material: stainless steel
Weight: 0.1

Universal stainless venturi flexible and adjustable from 8” to 11” and sold individually. Used to replace venturis for virtually any grill model for which no exact fit venturi is available. Gasket & screws not included, see part numbers 00400 or SHK4.

Part Number: 72401
Dimensions: 7 1/2” x 11”
Material: zinc plated steel
Weight: 0.3

Premium stainless steel cooking grids for Broilmaster and Warm Morning grills. Set of two (2) grids. Fits size 4 grill heads (D4, G4, P4, U4, etc.). Far superior to porcelain coated steel grids.

• Made in USA
• Commercial grade 304 stainless steel
• .225” solid stainless rods
• Sold as a set of two (2) panels

Each panel measures:

• Front-to-Back: 15 1/4”
• Side-to-Side: 11”

Total Side-to-Side:22”

Note: This part also replaces a 3-piece set of 7 1/4” pieces that totaled 22” Side-to-Side.

Part Number: 52202-SS-X2
Dimension Front-to-Back: 15 1/4”
Dimension Side-to-Side: 22”
Material: stainless steel
Weight: 8.0

Premium stainless steel cooking grid for Broilmaster and Warm Morning grills. Fits size 4 grill heads (D4, G4, P4, U4, etc.). Far superior to porcelain coated steel grids.

• Made in USA
• Commercial grade 304 stainless steel
• .225” solid stainless rods
• Sold Individually, 2 required.

Part Number: 52202-SS
Dimension Front-to-Back: 15 1/4”
Dimension Side-to-Side: 22”
Material: stainless steel
Weight: 4

Cast iron ”water fall style/multiple level” cooking grids (set of 3). Porcelain treated, glossy finish.

Part Number: 62203
Dimension Front-to-Back: 15 1/4”
Dimension Side-to-Side: 21 3/4”
Material: gloss cast iron
Weight: 17.6

Premium quality stainless steel cooking grids. SET OF TWO (2). Far superior to the porcelain coated steel grids it replaces.

• Made in USA
• 304 commercial grade stainless steel
• .225 diameter solid stainless rods

• Each panel measures 15 1/4” x 11”
• Overall dimensions: 15 1/4” x 22”

.

Part Number: CG-21SS-X2
Dimension Front-to-Back: 15 1/4”
Dimension Side-to-Side: 22”
Material: stainless steel
Weight: 8.0

carbon steel rock grate for Warm Morning model G-4 TXPL.

Part Number: 93001
Dimensions: 12 1/4” x 20 1/8”
Material: steel wire
Weight: 3.4

Aluminized steel radiation shield for G3, G3TX, S3, and U3. See part RSGSS for high quality stainless version of this part.

Part Number: RSG3
Dimension Front-to-Back: 8”
Dimension Side-to-Side: 16 3/4”
Material: aluminized steel
Weight: 2.0

Aluminized steel radiation shield. Installs below burner in some Amberlight, TEMCO, Charbroil, and Broilmaster models.

Part Number: 00600
Dimensions: 8” x 16 3/4”
Material: Aluminized steel
Weight: 1.8

20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03750
Dimensions: 1/16
Weight: 0.05

Universal adapter wire with male round and female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03751
Weight: 0.05

Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20” wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-5B
Weight: 0.3

Collector box and electrode assembly. Tongue style burner mounted collector box with ceramic electrode, 15” wire, and female round connector. Not designed to mount on original equipment burners. Fits our stainless steel burners with special mounting bracket only. Will NOT fit on cast iron burners.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03900
Material: ceramic
Weight: 0.2

Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-15B
Weight: 0.3

In post control valve without manifold or orifice, accepts accepts common 5/16” x 32 spud orifice. Fits Arkla and most twin in post control grills with spud orifice. Orifice not included.

Part Number: 38700
Dimensions: 3 1/8” x 1 3/8”
Material: brass
Weight: 0.3

Durable 2 5/16” round briquettes

• Self-cleaning
• Control flare-ups while holding an even heat pattern.
• About 53 pieces, covers approximately 275 sq. inches.
• Fits all gas grills

Part Number: BQ-5
Weight: 7.2

Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.

Part Number: 45887
Material: pummise
Weight: 7.0

Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

High quality, long lasting ceramic briquettes. 70 flat top pyramid-shaped briquettes per box. Placed 1/2” apart, 70 briquetes will cover about 437 square inches. This is an area roughly 17” x 26”.

• Top quality product
• Each briquette measure 2” x 2”
• Self cleaning
• Great heat distibution, retains heat longer
• Can be used on all grills that use briquettes or lava rock
• Use a single layer (multiple layers can reduce temperatures)

NOTE: These high quality ceramic briquetes are available in 59 count, 70 count, and 90 count qantities.

• 59 briquetes covers an area apprimately 15” x 24”
• 70 briquetes covers an area apprimately 17” x 26”
• 90 briquetes covers an area apprimately 17” x 33”

Made in USA

Part Number: CLA-AC0399
Dimensions: 2” x 2”
Material: ceramic
Weight: 9.75

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.

Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6

deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.

Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7