Warm Morning D3

Stainless steel Bowtie burner and venturi assembly kit. Fits Broilmaster D3, P3, S3, U3 grill heads.

This burner is an exact duplicate of the original 21” OEM burner DPP101, and is made by the same manufacturer using the same materials as the original. The new official Broilmaster version of DPP101 is a 17” Bowtie burner

NOTE: The original DPP101, a SS 21” bowtie burner, is no longer available from the manufacturer. The new DPP101 from Broilmaster, which is 3” shorter and a little narrower, is a fully functional replacement.

Comes with all necessary gaskets and screws.

Part Number: DPP101-R
Dimensions: 10 1/2” x 21”
Material: stainless steel
Weight: 3.5

Gasket kit. Round gasket fits all dual cast iron bowtie burners.

Part Number: DHK-3
Weight: 0.1

Cast iron bowtie burner and venturi assembly kit. Includes:

• Cast iron burner
• One (1) DV-8 twin venturi
• All necessary gaskets and scews.

Part Number: WDLB+DV-8
Dimensions: 10 3/4” x 21 3/4”
Material: cast iron
Weight: 15.3

Stainless steel burner and venturi assembly kit. Comes with all necessary gaskets and screws.

Part Number: 10602-725LR
Dimensions: 19 1/2” x 8”
Material: stainless steel
Weight: 4.0

Stainless steel H burner. Includes special bracket for optional 03900 burner-mounted collector box and electrode with wire. The 03900 electrode & box is a good solution for applications where the original OEM electrode cannot be used.

Part Number: 10602
Dimensions: 19 1/2” x 8”
Material: stainless steel
Weight: 2.8

Dual venturi. Does not include bracket spot-welded between venturi tubes. Includes all necessary gaskets and screws/nuts.

Part Number: 725LR
Dimensions: 4 3/4” x 3 7/16”
Material: zinc plated steel
Weight: 0.7

Cast iron ”water fall style/mutliple level” cooking grids (set of 3). Porcelain enameled, glossy finish.

Part Number: 62503
Dimension Front-to-Back: 16 13/16”
Dimension Side-to-Side: 25 1/8”
Material: gloss cast iron
Weight: 21.10

Stainless steel rod cooking grids for size 3 grill head (set of 2).

• Heavy gauge 8mm rod construction
• Restaurant quality stainless steel
• 2 piece set
• Fits: P3, D3, DU3, R3, U3, S3, G3, and R3.

Note: This is the same as part# B101281. Also replaces cast iron grid DPP103, which is no longer available.

Part Number: DPA111
Dimension Front-to-Back: 17 1/8”
Dimension Side-to-Side: 25 1/2”
Material: Stainless steel
Weight: 15.8

Premium stainless steel cooking grids for Broilmaster and Warm Morning grills. Set of three (3) grids. Fits size 3 grill heads (D3, G3, P3, S3, U3, etc.). Far superior to porcelain coated steel grids.

• Made in USA
• Commercial grade 304 stainless steel
• .225” solid stainless rods
• Sold as a set of three (3) panels

Each panel measures:

• Front-to-Back: 16 7/8”
• Side-to-Side: 8 3/8”

Total Side-to-Side: 25 1/8”

Part Number: 52503-SS-X3
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 25 1/8”
Material: stainless steel
Weight: 12

Premium stainless steel cooking grid for Broilmaster and Warm Morning grills. Fits size 3 grill heads (D3, G3, P3, S3, U3, etc.). Far superior to porcelain coated steel grids.

• Made in USA
• Commercial grade 304 stainless steel
• .225” solid stainless rods
• Sold individually, 3 required.

Part Number: 52503-SS
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 8 3/8”
Material: stainless steel
Weight: 4.00

Premium quality stainless steel cooking grids. SET OF THREE (3). Far superior to the porcelain coated steel grids it replaces.

• Made in USA
• 304 commercial grade stainless steel
• .225 diameter solid stainless rods

• Each panel measures 16 7/8” x 8 3/8”
• Overall dimensions: 16 7/8” x 25 1/8”

.

Part Number: CG-20SS-X3
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 25 1/8”
Material: stainless steel
Weight: 12.00

carbon steel rock grate for Warm Morning model D3.

Part Number: 92901
Dimensions: 13 1/2” x 23 1/8”
Material: steel wire
Weight: 4.4

Briquette Rack. Fits all size 3 grill head models. Manufacturer's Note: Some versions of this rack may include stainless steel extension brackets. See part DPA116 for Ceramic Flare Busters.

Part Number: B101061
Dimensions: 13 13/16” x 23 7/8”
Material: porcelain steel
Weight: 5.4

B063065 Radiation Shield (Heat & Wind Deflector), Fits All Models.

Genuine Broilmaster factory part. Also known as DPP7SS.

Part Number: B063065
Weight: 1.0

Flare Busters Flat Ceramic Pads. For P3, T3, D3, H3. Package of 12. Each tile measures 7 1/4 ” x 3 1/2”. Used with B101061 rack.

Part Number: DPA116
Dimension Front-to-Back: 7 1/4”
Dimension Side-to-Side: 3 1/2”
Material: ceramic
Weight: 4.5

Collector Box (Electronic Ignitor), electrode, & connector wire with female spade end. Fits P3/P4

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: B100446
Weight: 0.2

Collector Box Spacer, Fits P 3/4 D 3/4/5

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: B069743
Weight: 0.01

Electronic ignitor head with two (2) male spade connectors. Fits 3/P4/P5/D3/D4

• Uses 1 AA battery (not included)
• Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: B072218
Weight: 0.2

Ground Lug, Fits All Models

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: B069747
Weight: 0.01

Ground Wire, Fits All Electronic Models

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: B072684
Weight: 0.1

20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03750
Dimensions: 1/16
Weight: 0.05

Universal adapter wire with male round and female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03751
Weight: 0.05

Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20” wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-5B
Weight: 0.3

36” wire with two female spade connectors for side burner igniters (not for use with rotary or piezo ignitors).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03500
Weight: 0.05

Collector box and electrode assembly. Tongue style burner mounted collector box with ceramic electrode, 15” wire, and female round connector. Not designed to mount on original equipment burners. Fits our stainless steel burners with special mounting bracket only. Will NOT fit on cast iron burners.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03900
Material: ceramic
Weight: 0.2

Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-15B
Weight: 0.3

Knob, Black (New Style), Fits P3/4/4, SR3, D3/4/5/2.
Also replaces part# B070286, which no longer available.

• Off position D-Value: 3 o'clock
• Knob diameter: 1 5/8”
• Socket diameter: 5/16”
• Knob shaft: 1/2”

Part Number: B070084
Weight: 0.04

Double valve and manifold assembly for all Broilmaster up-front control natural gas models. Assembly includes left and right valve and manifold.

Part Number: 34900
Dimensions: 2 5/8” x 3 11/16”
Material: brass
Weight: 0.6

Universal bolt-on heat indicator replaces most factory installed indicators with 1 1/2” bolt centers. Stainless steel case.

Part Number: TG-2B
Weight: 0.2

High quality, long lasting ceramic briquettes. 59 flat top pyramid-shaped briquettes per box. Placed 1/2” apart, 59 briquetes will cover about 368 square inches. This is an area roughly 15” x 24”.

• Top quality product
• Each briquette measure 2” x 2”
• Self cleaning
• Great heat distibution, retains heat longer
• Can be used on all grills that use briquettes or lava rock
• Use a single layer (multiple layers can reduce temperatures)

NOTE: These high quality ceramic briquetes are available in 59 count, 70 count, and 90 count qantities.

• 59 briquetes covers an area apprimately 15” x 24”
• 70 briquetes covers an area apprimately 17” x 26”
• 90 briquetes covers an area apprimately 17” x 33”

Made in USA

Part Number: CLA-AC0394
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.65

BBQ'er choice porcelain grill briquets. The finest available.

• Self-Cleaning Porcelain Briquettes.
• Made of fired porcelain for even heat transfer.
• Virtually indestructible.
• About 56 pieces covers approximately 310 square inches.
• Made in USA .

NOTE: MHP model TJK requires two (2) bags.

Part Number: BQ-3A
Weight: 4.2

shishkebob skewers

Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4

Ceramic briquettes for Lynx and Dynasty Grills with 28 briquettes per box.

Part Number: BQLYX
Dimensions: 2” x 2”
Material: ceramic
Weight: 4.0

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.

Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7