Home > Turbo Grill Models > Turbo G5STRTurbo Select 5-Burner LP gas grill
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Turbo grill.
Part diagrams and owners manuals for Turbo model: G5STR (Select)
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement gas grill parts for Turbo model: G5STR (Select)
G5STR (Select) Burners
P02001002E-R1-X5 Cast Iron Burners. SET OF FIVE (5).
Fits Turbo Select models:
This aftermarket part replaces original Turbo burner part P02001002E.
Part Number: P02001002E-R1-X5
Dimensions: 16 1/4” x 2 1/16”
Material: cast iron
Weight: 15.5
$157.40
P02001002E-R1 Cast Iron Burner.
Fits Grand Turbo models:
- B3807xxx, B3808xxx, B3810xxx, B3812xxx, B3816xxx
- BAI07xxx, BAI08xxx, BAI10xx, BAI12xx, BAI16xxx
- Y0662, Y0663, Y0665
- YN662, YN663, YN662AGLP
Also fits Turbo Select models:
- G5STR, G5STRN
- G6STR, G6STRN.
Also available in more economical 5 and 6 burner multi-packs.
This aftermarket part replaces original Turbo burner part P02001002E.
Part Number: P02001002E-R1
Dimensions: 16 1/4” x 2 1/16”
Material: cast iron
Weight: 3.1
$36.87
G5STR (Select) Flame Tamers
Ceramic Flame Tamers for Turbo Select grills. Measures 7 1/16” x 4 3/4”. Box of 4.
Note: This part is used in racks P01720001B.
Fits models:
Replaces Turbo factory part# P01804004A
Part Number: P01804004A-R
Dimension Front-to-Back: 7 1/16”
Dimension Side-to-Side: 4 3/4”
Material: ceramic
Weight: 4.0
$45.00 $34.99
G5STR (Select) Igniter Components
Ignitor collector box with ceramic electrode and male
round connector.
- Wire not included. Commonly used with wire part# 03400.
- Designed to connect to wires with round female connector.
- If used with existing wire, confirm connector type is round where wire connects to electrode.
See part 02623-X4 for a more econimical 4 pack.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Turbo factory part# P02609002B
Part Number: 02623
Material: ceramic
Weight: 0.2
$10.84
Battery powered push button igniter.
- Has four (4) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4” or 13/16” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Turbo factory part# P02502134C
Part Number: IGEIB4-B
Weight: 0.3
$34.08
Universal four-outlet battery powered push button ignitor.
- 1.5 volt
- Has four (4) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Turbo factory part# P02502134C
Part Number: 03340
Weight: 0.5
$31.50
Push-button electronic igniter with four (4)
spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG4010
Weight: 0.2
$18.48
46” Wire with female
spade connectors and square plastic connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-30B
Dimensions: 46
Weight: 0.1
$7.10
25” wire with female
spade connector on one end, and female
round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is
round connector to electrode, spade (flat) connector to igniter.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03400
Weight: 0.1
$5.31
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$9.07
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.55
G5STR (Select) Accessories
6 chrome plated 18” shish-ke-bab skewers
Part Number: 63371
Weight: 0.2
$14.27
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$6.64
Upright porcelain steel roasting rack with grid topper.
Part Number: 40935
Weight: 2.9
$31.80 $21.99
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.5
$17.59