Patio Kitchen Igniter Components. Replacement Igniter Components for Patio Kitchen grills. FREE shipping.

Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Patio Kitchen grill.

Patio Kitchen Igniter Components

Universal 5 1/2” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire for some Patio Kitchen grills.
NOTICE: EACH END HAS A PLASTIC PROTECTOR CAP.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03197
Weight: 0.05

$5.31

Universal 2 5/8” adapter wire with female round and male spade connectors for some Patio Kitchen grills. Primarily used when connecting spark generators (ignitors) to electrode wires with unlike connectors. Typically, push-button and rotory piezo spark generators have male round connectors, while battery operated electronic spark generators usually have male spade connectors.

Can change male round to male spade
Can change female spade to female round

ALL

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03198
Weight: 0.05

$5.31

Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover for some Patio Kitchen grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199C
Weight: 0.05

$4.37

Universal battery powered push button ignitor for some Patio Kitchen grills.

1.5 volt
Has one (1) terminal (male spade connector)
Uses a single AAA battery (not included)
Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03310
Weight: 0.3

$16.95

Universal volt battery powered push button ignitor for some Patio Kitchen grills.

1.5 volt
Has two (2) terminals (male spade connector)
Uses a single AAA battery (not included)
Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03320
Weight: 0.3

$31.50

Universal battery powered push button ignitor for some Patio Kitchen grills.

1.5 volt
Has three (3) terminals (male spade connector)
Uses a single AAA battery (not included)
Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03330
Weight: 0.5

$18.48

Universal three-outlet battery powered push button ignitor for some Patio Kitchen grills.

1.5 volt
Has three (3) terminals (male spade connector)
Uses a single AA battery (not included)
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03333
Dimensions: 2 9/16” x 2”
Weight: 0.5

$35.57

Universal battery powered push button ignitor for some Patio Kitchen grills.

1.5 volt
Has (5) terminals (male spade connector)
Uses a single AAA battery (not included)
Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03335
Dimensions: 2 5/8” x 2”
Weight: 0.3

$19.43

Universal four-outlet battery powered push button ignitor for some Patio Kitchen grills.

1.5 volt
Has four (4) terminals (male spade connector)
Uses a single AA battery (not included)
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole
Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03340
Weight: 0.5

$31.50

Universal battery powered push button ignitor for some Patio Kitchen grills.

1.5 volt
Has six (6) terminals (male spade connector)
Uses a single AA battery (not included))
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole
Overall dimensions: 2” x 3 3/8” x 3”
Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03350
Weight: 0.7

$33.56

Universal battery powered push button ignitor for some Patio Kitchen grills.

1.5 volt
Has five (5) terminals (male spade connector)
Uses a single AA battery (not included))
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole
Overall dimensions: 2” x 3 3/8” x 3”
Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7

$39.86

20” Ignitor adapter wire with female spade connector and male round connector for some Patio Kitchen grills. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03750
Dimensions: 1/16
Weight: 0.05

$6.01

Universal adapter wire with male round and female spade connectors for some Patio Kitchen grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03751
Weight: 0.05

$3.98

Collector box and electrode assembly for some Patio Kitchen grills. Tongue style burner mounted collector box with ceramic electrode, 15” wire, and female round connector. Not designed to mount on original equipment burners. Fits our stainless steel burners with special mounting bracket only. Will NOT fit on cast iron burners.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03900
Material: ceramic
Weight: 0.2

$10.84

Universal collector box with electrode and wire for some Patio Kitchen grills. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-15B
Weight: 0.3

$14.41

Tongue style collector box for burner mounted applications for some Patio Kitchen grills. Includes preinstalled electrode with round female connector end and 20” wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-5B
Weight: 0.3

$10.81

Universal 3 outlet rotary spark generator for some Patio Kitchen grills. Includes knob.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-8B
Weight: 0.3

$21.96

We can ship parts for Patio Kitchen gas BBQ grills worldwide

Back to Patio Kitchen grill parts

GRILLING ACCESSORIES

Briquettes & Lava Rock

Grill Covers

Grilling Tools

Basting and Cleaning brushes

Wood Chips and Smoker Trays

Grid Toppers, Griddles & Racks

Fish and burger baskets

Grill and Tank Accessories

Shish-kebab Sets & Skewers

Grilling & outdoor cooking books

Part# 03750 fits these 37 Patio Kitchen models:
Omega (Pre-1980) PK-1800 PK-200 PK-2100 Delta PK-2110 PK-400 PK-400-AU	PK-400-T-20 PK-4117 Regent PK-412 PK-412-DMT PK-412-RMT PK-412-T PK-4120-DMT	PK-4120-RMT PK-4120-T PK-4122 PK-4126 PK-4126-D PK-4126-DMT PK-4126-R	PK-4126-RMT PK-4126-T PK-4127(AU)(DU) PK-4200 Omega PK-4210 PK-4227 PK-4240	PK-4285 PK-4640 PK-7701 PK-8450 PK-8460 PK-8484HD 3 more models...

Part# 03900 fits these 14 Patio Kitchen models:
PK-1800 PK-200 PK-4117 Regent	PK-4200 Omega PK-4210 PK-4240	PK-4285 PK-7701 PK-8450	PK-8460 PK-8484HD PK-8485HD	PK-8850 PK-9901

Part# IG-5B fits these 25 Patio Kitchen models:
Omega (Pre-1980) PK-2100 Delta PK-2110 PK-400 PK-400-AU	PK-400-T-20 PK-412 PK-412-DMT PK-412-RMT PK-412-T	PK-4120-DMT PK-4120-RMT PK-4120-T PK-4122 PK-4126	PK-4126-D PK-4126-DMT PK-4126-R PK-4126-RMT PK-4126-T	PK-4127(AU)(DU) PK-4227 PK-4640 PK-8850 Regent (Pre-1980)