Flame Tamers for Member's Mark grills

Porcelain steel Flame Tamer for some Member's Mark grills. Sold individually.

Part Number: 90691
Dimension Front-to-Back: 15 1/4”
Dimension Side-to-Side: 4 3/4”
Material: porcelain steel
Weight: 0.8

Porcelain steel Flame Tamer for some Member's Mark grills. Sold individually.

Part Number: 90731
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 3/8”
Material: porcelain steel
Weight: 1.0

Porcelain steel Flame Tamer for some Member's Mark grills.

Part Number: 92291
Dimension Front-to-Back: 17 1/8”
Dimension Side-to-Side: 7 3/8”
Material: porcelain steel
Weight: 1.5

Porcelain steel Flame Tamers for some Member's Mark grills. SET OF TWO (2).

Part Number: 92291-X2
Dimension Front-to-Back: 17 1/8”
Dimension Side-to-Side: 7 3/8”
Material: porcelain steel
Weight: 3.0

Porcelain steel Flame Tamer for some Member's Mark grills. Sold individually.

Part Number: 93281
Dimension Front-to-Back: 17 1/8”
Dimension Side-to-Side: 4 7/8”
Material: porcelain steel
Weight: 1.7

Porcelain steel Flame Tamers for some Member's Mark grills.

SET OF EIGHT (8).

Part Number: 93281-X8
Dimension Front-to-Back: 17 1/8”
Dimension Side-to-Side: 4 7/8”
Material: porcelain steel
Weight: 13.6

Stainless steel Flame Tamer for some Member's Mark grills. Use one per burner.

Fits Lowe's Master Forge BG179 series grills

• BG1793B-A - 3-Burner
• BG179A - 4-Burner
• BG1795BAL - 5-Burner

Part Number: 94121
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 5 3/8”
Material: stainless steel
Weight: 1.1

Stainless steel Flame Tamers for some Member's Mark grills. SET OF THREE (3). Use one per burner.

Fits Lowe's Master Forge BG1793B-A 3-Burner gas grill. May fit other models

Part Number: 94121-X3
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 5 3/8”
Material: stainless steel
Weight: 3.3

Stainless steel Flame Tamers for some Member's Mark grills. SET OF FOUR (4). Use one per burner.

Fits Lowe's Master Forge BG179A 4-Burner gas grill. May fit other models

Part Number: 94121-X4
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 5 3/8”
Material: stainless steel
Weight: 4.4

Stainless steel Flame Tamer for some Member's Mark grills. Sold individually.

Part Number: 94391
Dimension Front-to-Back: 15 3/8”
Dimension Side-to-Side: 5 1/8”
Material: stainless steel
Weight: 1.0

Porcelain steel Flame Tamer for some Member's Mark grills. Sold individually.

Part Number: 97371
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: porcelain steel
Weight: 0.55

Porcelain steel Flame Tamers for some Member's Mark grills. SET OF SIX.

Part Number: 97371-X6
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: porcelain steel
Weight: 3.3

Stainless steel Flame Tamer for some Member's Mark grills. Sold individually.

Part Number: 97461
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 4 3/16”
Material: stainless steel
Weight: 0.7

Ceramic Flame Tamers - Box of 6 for some Member's Mark grills. Use with rack part# FP-P1736B; see Rock Grates.

Tired of replacing broken ceramic flame tamers? For many models, you can replace them and the rack that holds them with our longer-lasting made-in-the-USA metal flame tamers, which come in stainless steel and more economical carbon steel versions. When available, the replacement metal flame tamers are shown with the other parts we have for a model.

Part Number: 97501
Dimension Front-to-Back: 8”
Dimension Side-to-Side: 7 1/4”
Material: ceramic
Weight: 9.0

Stainless steel Flame Tamer/heat plate for some Member's Mark grills.

This heat plate also provides an economical alternative to some other heat plates with the same front-to-back dimension.

• Sold individually, number required varies.
• Shipped with protective peel-off coating, remove before use.
• Made in USA .

Part Number: CLA-TS0020
Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 6 3/8”
Material: stainless steel
Weight: 0.80

SET OF THREE/3 PACK Stainless steel Flame Tamer/heat plate for some Member's Mark grills.

This heat plate also provides an economical alternative to some other heat plates with the same front-to-back dimension.

• Sold individually, number required varies.
• Shipped with protective peel-off coating, remove before use.
• Made in USA .

Part Number: CLA-TS0020-X3
Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 6 3/8”
Material: stainless steel
Weight: 2.4

SET OF FOUR/4 PACK Stainless steel Flame Tamer/heat plate for some Member's Mark grills.

This heat plate also provides an economical alternative to some other heat plates with the same front-to-back dimension.

• Sold individually, number required varies.
• Shipped with protective peel-off coating, remove before use.
• Made in USA .

Part Number: CLA-TS0020-X4
Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 6 3/8”
Material: stainless steel
Weight: 3.2

Stainless steel Flame Tamer for some Member's Mark grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0083
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 5”
Material: stainless steel
Weight: 0.9

Stainless steel Flame Tamer for some Member's Mark grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0136
Dimension Front-to-Back: 17 5/16”
Dimension Side-to-Side: 5 13/16”
Material: stainless steel
Weight: 0.94

Stainless steel heat plate/Flame Tamer for some Member's Mark grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0157
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: stainless steel
Weight: 0.72

SET OF THREE/3 PACK Stainless steel heat plate/Flame Tamer for some Member's Mark grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0157-X3
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: stainless steel
Weight: 2.16

SET OF FOUR/4 PACK Stainless steel heat plate/Flame Tamer for some Member's Mark grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use..

Part Number: CLA-TS0157-X4
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: stainless steel
Weight: 2.88

Stainless steel heat plate/Flame Tamer for some Member's Mark grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0158
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 3/8”
Material: stainless steel
Weight: 0.77

SET OF FOUR/4 PACK Stainless steel heat plate/Flame Tamer for some Member's Mark grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0158-X4
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 3/8”
Material: stainless steel
Weight: 3.08

SET OF FIVE/5 PACK Stainless steel heat plate/Flame Tamer for some Member's Mark grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0158-X5
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 3/8”
Material: stainless steel
Weight: 3.85

Stainless steel Flame Tamer for some Member's Mark grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0216
Dimension Front-to-Back: 15 1/4”
Dimension Side-to-Side: 4 7/8”
Material: stainless steel
Weight: 0.80

SET OF FOUR/4 PACK Stainless steel Flame Tamer for some Member's Mark grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0216-X4
Dimension Front-to-Back: 15 1/4”
Dimension Side-to-Side: 4 7/8”
Material: stainless steel
Weight: 3.2

Replacement steel Flame Tamer for some Member's Mark grills. For many models, can also be used to replace ceramic flame tamers and the rack that holds them. Made in USA .
TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive late Aug.

Part Number: CLA1721
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 9 3/4”
Material: carbon steel
Weight: 3.5

Stainless steel Flame Tamer for some Member's Mark grills. For many models, can also be used to replace ceramic flame tamers and the rack that holds them. Made in USA .

Part Number: CLA2721
Dimension Front-to-Back: 16 3/4”
Dimension Side-to-Side: 9 3/4”
Material: stainless steel
Weight: 2.4

SET OF THREE/3 PACK Stainless steel Flame Tamer for some Member's Mark grills. For many models, can also be used to replace ceramic flame tamers and the rack that holds them. Made in USA .

Part Number: CLA2721-X3
Dimension Front-to-Back: 16 3/4”
Dimension Side-to-Side: 9 3/4”
Material: stainless steel
Weight: 7.2

Stainless steel Flame Tamer for some Member's Mark grills.

Part Number: NGCHP2
Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 6 3/8”
Material: stainless steel
Weight: 0.7

Stainless steel Flame Tamer for some Member's Mark grills.

Part Number: NGCHP4
Dimension Front-to-Back: 17 5/16”
Dimension Side-to-Side: 5 7/8”
Material: stainless steel
Weight: 0.7

Stainless steel Flame Tamer for some Member's Mark grills.

Part Number: NGHP2
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 3/8”
Material: stainless steel
Weight: 1.0

Nickel plated heavy duty steel 5/16” thick Flame Tamer rack for some Member's Mark grills. Holds six ceramic Flame Tamers part # SCFT/P1736A-R (not included). This is an aftermarket part made to replace original part numbers P1736B and P01722001B, which are no longer available.

Fits models:

• Regal04
• Y005XC-1
• and others

Part Number: P01722001B-R
Dimension Front-to-Back: 16 5/8”
Dimension Side-to-Side: 31”
Material: nickel plated steel
Weight: 5.6

Flame Tamer Rack for some Member's Mark grills. Heavy duty nickel plated 5/16” steel rod. Each rack holds twelve (12) P01804001A-R ceramic flame tamers (sold separately). Also known as part number P1736A.

NOTE: This is an aftermarket part made to replace original part number P01722021B, which is no longer available.

Fits models:

• MONARCH04
• Y0660
• and others

Part Number: P01722021B-R
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 33 7/16”
Material: nickel plated steel
Weight: 8.95

Ceramic Flame Tamer for some Member's Mark grills. Measures 7” x 8”. Box of 6.

Note: This part is used in racks P01722001B, P01722021B.

Fits models:

• Regal04ALP/NG
• MONARCH04ALP/NG
• And others

Part Number: P01804001A-R
Dimension Front-to-Back: 7”
Dimension Side-to-Side: 8”
Material: ceramic
Weight: 9.0

Ceramic Flame Tamer for some Member's Mark grills. Measures 7” x 8”. Box of 6.

Note: This part is used in racks P1736B, P1739A, P01722021B.

Fits models:

• Y0005XC-1
• Y0005XC-2
• Y0101XC
• Y0202XC
• Y0660LP/NG
• And others

Part Number: P1736A-R
Dimension Front-to-Back: 7”
Dimension Side-to-Side: 8”
Material: ceramic
Weight: 9.0

Nickel plated heavy duty steel 5/16” thick Flame Tamer rack for some Member's Mark grills. Holds six ceramic Flame Tamers part # SCFT/P1736A-R (not included). This is an aftermarket part made to replace original part numbers P1736B and P01722001B, which are no longer available.

Fits models:

• Y0101XC
• Y0202XC
• and others

Part Number: P1736B-R
Dimension Front-to-Back: 16 5/8”
Dimension Side-to-Side: 31”
Material: nickel plated steel
Weight: 5.6

Rack for ceramic Flame Tamers; nickel plated heavy duty wire 5/16” thick for some Member's Mark grills. Uses 12 ceramic flame tamers part# P1736A-R (not included).

NOTE: This replacement part is not exactly like the original P1739A rack, but a very functional replacement. It cannot use the original ceramic Flame Tamers. The original rack held six larger Flame Tamers, while P01720021B-R uses twelve smaller ones. Using only 10 tamers will allow the smoker burner to remain uncovered as was the case with the original rack.

Part Number: P1739A-R
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 33 7/16”
Material: nickel plated steel
Weight: 8.95