Knobs and Handles for Master Forge grills

Universal control knob with with long 1” shaft for some Master Forge grills. Counter-clockwise bezel.

• The adhesive-backed knob face can be attached to the knob in any position, which allows the knob to have OFF at the top, bottom, or wherever necessary. Simply stick the knob face in the position reguired for your grill
• Off position D-Value: Selectable (12, 3, 6, or 9 o'clock)
• Knob diameter: 2”
• Socket diameter: 8mm
• Knob shaft: 1 inch

Part Number: 00110
Dimensions: 2” x 2”
Material: plastic
Weight: 0.1

Universal control knob for some Master Forge grills. Counter-clockwise bezel.

• The adhesive-backed knob face can be attached to the knob in any position, which allows the knob to have OFF at the top, bottom, or wherever necessary. Simply stick the knob face in the position reguired for your grill
• Off position D-Value: Selectable
• Knob diameter: 2 1/16”
• Socket diameter: 8mm
• Knob shaft: 1/2”

Part Number: 00310
Dimensions: 2 1/16” x 2 1/16”
Material: plastic
Weight: 0.1

Universal 24” hardwood front lid handle for some Master Forge grills. Designed to bolt through existing lid holes, if present. Sliding mounting hardware can adjust to holes up to 23” apart.

Part Number: 01200
Dimensions: 24
Material: Wood
Weight: 0.8

Universal black control knob for some Master Forge grills. Counter-clockwise bezel.

• Off position D-Value: Selectable
• Knob diameter: 2 1/16”
• Socket diameter: 8mm
• Knob shaft: None

Part Number: 01800
Dimensions: 2 1/16” x 2 1/16”
Material: plastic
Weight: 0.05

Universal 2 5/16” knob for some Master Forge grills.

• Selectable D-Value
• Selectable socket diameter - 6mm or 8mm.
• Selectable shaft length - flush, 1/4”, or 1 5/8”. Shafts can also be trimmed to desired length.
• Includes 6 shaft inserts and set screw.
• Fits any grill with inside bezel diameter greater than 2 5/16” (the knob diameter).

Part Number: 02342
Dimensions: 2 5/16” x 2 5/16”
Material: plastic
Weight: 0.20

Genuine OEM small control knob for some Master Forge grills.

• Off position D-Value: 6 o'clock
• Knob diameter: 1 7/8”
• Socket diameter: 5/16”
• Knob shaft: 1/2”

Part Number: 22001-668
Weight: 0.1

Genuine OEM silver control knob for some Master Forge grills.
There has been some confusion regarding the knob part numbers caused by revisions by the manufacturer. Basically, for the models whose owners manual shows part# 22002-966 or 22002-968, pick 22002-96 if you need a silver knob; pick 22002-966 if you need a black knob.

• Off position D-Value: 6 o'clock or 12 o'clock (no on/off mark)
• Knob diameter: 2 1/4”
• Socket diameter: 8mm
• Knob shaft: 1/2 inch

Part Number: 22002-96
Weight: 0.1

HANDLE LID for some Master Forge grills.

Part Number: 24006-134
Weight: 1.0

HANDLE RING - MASTER FORGE for some Master Forge grills.

Part Number: 24009-934
Weight: 1.0

BEZEL - TERMOMETER GAUGE for some Master Forge grills.

Part Number: 24996-10
Weight: 0.1

Universal hardwood lid handle for some Master Forge grills.

Part Number: 25950
Material: wood
Weight: 0.3

Universal control knobs, set of two knobs, includes eight (8) shaft inserts to accomodate valve stem diameters of approximately 5/6” and 1/4” for some Master Forge grills.

• Off position D-Value: 12 or 6 or 3 or 9 o'clock
• Knob diameter: 2 3/16”
• Insert socket diameters: 8.25mm (.32”) and 6.10mm (.24”)
• Knob shaft: Flat or 1”

Part Number: 25960
Weight: 0.20

Universal stainless steel lid handle for some Master Forge grills. Adjusts from 21” hole centers, down to 10”. Includes mounting hardware. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0055
Dimensions: 23 5/8
Material: stainless steel
Weight: 1.0

Universal durable black phenolic lid handle with threaded brass insert for some Master Forge grills. (1/4” x 20 thread). Includes mounting bolt and lockwasher. Made for Ducane but makes a great universal lid handle that can be used on almost any grill.

Part Number: PH-2B
Dimensions: 3 1/2
Material: 6.59
Weight: .3

KNOB VALVE LARGE for some Master Forge grills.

Part Number: SP11-7
Weight: 0.1

Phenolic standoff spacer (1 1/2” x 1 1/8”) used between lid handle and the grill's lid for some Master Forge grills.

Part Number: SP5001-40
Weight: .03