Lowes RT2417S

stainless steel burner for Lowes model RT2417S.

Replaces Lowes factory part# 2518-3-8012

Part Number: 12351
Dimensions: 16 5/16” x 1”
Material: stainless steel
Weight: 1.0

Stainless steel Heat Tent/ Flame Tamer. Sold individually, number required varies.

Part Number: BMHP8
Dimension Front-to-Back: 15 3/8”
Dimension Side-to-Side: 3 9/16”
Material: stainless steel
Weight: 0.5

Stainless steel Heat Distribution Plate. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Replaces Lowes factory part# 2518SL-2003-N

Part Number: CLA-TS0147
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 5/8”
Material: stainless steel
Weight: 0.54

SET OF FOUR/4 PACK Stainless steel Heat Distribution Plates. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0147-X4
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 5/8”
Material: stainless steel
Weight: 2.16

SET OF FIVE/5 PACK Stainless steel Heat Distribution Plates. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0147-X5
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 5/8”
Material: stainless steel
Weight: 2.7

Electrode assembly. Includes:

• Ceramic electrode
• Gas collector box
• 40” connector wire with female spade connector
• Mounting nuts and bolts

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03118
Material: ceramic
Weight: 0.2

Ignition module switch for spark generators that accept wired remote (button) trigger switches. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387 and 03388.
Includes:

• Push-button ignition module switch with two male spade connectors on back
• Two 20” wires with female spade connectors
• One plastic mounting nut

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03152
Dimensions: 17 3/4” x 1”
Weight: 0.1

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.

• 1.5 volt
• Has three (3) spark outlets (male spade connector)
• Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03332
Dimensions: 2 5/8” x 2 5/8”
Weight: 0.3

Ground wire required when replacing spark generator for a valve-triggered electrode with a remote switch-triggered spark generator. 03621 plugs into one switch inlet; ring connects to generator neck; switch wire plugs into the other generator switch inlet

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03621
Dimensions: 1 1/8” x 1 1/8”
Weight: 0.1

Universal premium quality stainless steel warming rack. You simply can't buy a better quality warming rack than this, which weighs in at almost 5lbs of solid 304 grade stainless steel. This super heavy-duty warming rack was made to replace the porcelain coated steel racks found on BBQ grills made by The Great Outdoors Grill Company, but can be used in many other different grills.

• Far superior to the original porcelain coated steel rack
• Rests on your existing cooking grids.
• Solid 1/4” 304 stainless steel rods.
• Stands 3.75 inches tall.
• Made in USA .

WARNING: Before ordering this universal rack, please verify your grill has enough space to accommodate it. If you need to return, you will be responsible for return shipping, and the original out bound shipping fee will be deducted from the refund. What's required?

• Your grill needs to be at least 24” wide on the inside . The warming rack is 6.25” front to back and stands 3.75” tall.
• Notice the shape of the warming rack. Determine if the lid of your grill can easily close with the warming rack inside along with food placed on top of the rack.
  
  Part Number: CLA-WS0040
  Dimensions: 6 1/4” x 22 7/8”
  Material: stainless steel
  Weight: 4.8

heat indicator for Lowes model RT2417S.

Replaces Lowes factory part# RT2417S-00-8020

Part Number: 02351
Dimensions: 2 5/8” x 2 5/8”
Weight: 0.2

6 deluxe chrome plated 22” shish-ke-bab skewers with wooden handles

Part Number: 40538
Material: chrome steel
Weight: 1.1

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Material: chrome steel
Weight: 0.9

economy basting brushes. Two brushes, 7.5” long.

Part Number: 43054
Weight: 0.1

Stainless steel chicken roaster. Commonly called Beer Can roasters.

• The best way to roast poultry on the grill
• For use in barbecues and ovens
• Dishwasher safe
• Includes rack, rack support, and basting brush

Part Number: 41333
Material: stainless steel
Weight: 0.10

Grill Mitt With Neoprene Palm.

16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most

Part Number: 90963
Weight: 0.5