Lowes MFA350BNP

102-03003-R Main Burner - Left. Stainless steel. Fits Master Forge MFA350 series grills. May fit other models.

This part replaces original Master Forge burner # 102-03003.

Part Number: MF1-102-03003-R
Dimensions: 15 5/8” x 4 3/8”
Material: stainless steel
Weight: 0.9

102-03004-R Main Burner - Right. Stainless steel. Fits Master Forge MFA350 series grills. May fit other models.

This part replaces original Master Forge burner # 102-03004.

Part Number: MF1-102-03004-R
Dimensions: 15 5/8” x 4 3/8”
Material: stainless steel
Weight: 0.9

102-03003-SET Main Burners. Set of two (2) burners, a left and right burner pair. Stainless steel. Fits Master Forge MFA350 series grills. May fit other models.

This part replaces original Master Forge burner # 102-03003 (left burner) and 102-03004 (right burner).

Part Number: MF1-102-03003-SET
Dimensions: 15 5/8” x 4 3/8”
Material: stainless steel
Weight: 1.8

Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually.

Part Number: 67241-UNI
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 8 3/4”
Material: porcelain cast iron
Weight: 5.55

Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 69762-UNI-X2 for a set of two (2) grids.

Part Number: 69762-UNI
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 10 3/8”
Material: cast iron
Weight: 6.95

101-03011-R Cooking Grate. Porcelain treated matte finish cast iron grates. Sold as a 2-piece set.

Fits Master Forge MFA350 series grills. May fit other models.

This grate replaces original Master Forge part 101-03011.

Part Number: MF1-101-03011-R
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 19 1/8”
Material: cast iron
Weight: 7.10

101-03005-R-X2 Heat tent. Set of two (2). Porcelain enameled steel.

Fits Master Forge MFA350 series grills grills. May fit other models.

This heat tent replaces original Master Forge part 101-03005.

Part Number: MF1-101-03005-R-X2
Dimension Front-to-Back: 14 7/8”
Dimension Side-to-Side: 6 1/4”
Material: porcelain steel
Weight: 2.0

101-03005-R Heat tent. Porcelain enameled steel. Sold individually.

Fits Master Forge MFA350 series grills grills. May fit other models.

This heat tent replaces original Master Forge part 101-03005.

Part Number: MF1-101-03005-R
Dimension Front-to-Back: 14 7/8”
Dimension Side-to-Side: 6 1/4”
Material: porcelain steel
Weight: 1.0

101-00301-04-R-X2 Heat tent. Set of two (2). Stainless steel.

Fits Master Forge MF350SNP and MF700SSB model grills. May fit other models.

This heat tent replaces original Master Forge part 101-00301-04.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Made in USA

Part Number: MF3-101-03001-04-R-X2
Dimension Front-to-Back: 14 7/8”
Dimension Side-to-Side: 6 1/4”
Material: stainless steel
Weight: 1.96

101-00301-04-R Heat tent. Stainless steel. Sold individually.

Fits Master Forge MF350SNP and MF700SSB model grills. May fit other models.

This heat tent replaces original Master Forge part 101-00301-04.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Made in USA

Part Number: MF3-101-03001-04-R
Dimension Front-to-Back: 14 7/8”
Dimension Side-to-Side: 6 1/4”
Material: stainless steel
Weight: 0.98

102-03013-R Ignition electrode and ignition wire assembly. Set of two (2). Fits Master Forge MFA350 series grills. Includes 8” wire. May fit other models.

This Ignition electrode replaces original Master Forge part 102-03013.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: MF1-102-03013-R-X2
Material: ceramic
Weight: 0.2

102-03013-R Ignition electrode and ignition wire assembly. Fits Master Forge MFA350 series grills. Includes 8” wire. May fit other models.

This Ignition electrode replaces original Master Forge part 102-03013.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: MF1-102-03013-R
Material: ceramic
Weight: 0.1

Push-button electronic igniter with two (2) spade connectors. Black cap. 1 AAA battery (not included).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG2006
Weight: 0.2

Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199C
Weight: 0.05

Battery powered push button igniter.

• Has two (2) spade type male connectors.
• Uses 1 AAA battery (not supplied)
• Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB2-B
Weight: 0.3

Universal volt battery powered push button ignitor.

• 1.5 volt
• Has two (2) terminals (male spade connector)
• Uses a single AAA battery (not included)
• Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03320
Weight: 0.3

Universal battery powered push button ignitor.

• 1.5 volt
• Has six (6) terminals (male spade connector)
• Uses a single AA battery (not included))
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03350
Weight: 0.7

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

Grease pan with a new design made of stainless steel and not an exact duplicate of the original; is a fully functional replacement. Includes grease cup and grease cup holder. Made in USA .

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Replaces Lowes factory part# MF-102-04013

Part Number: CLA-DS0279
Dimensions: 7 1/8” x 19 5/16”
Material: stainless steel
Weight: 2.7

Universal premium quality stainless steel warming rack. You simply can't buy a better quality warming rack than this, which weighs in at almost 5lbs of solid 304 grade stainless steel. This super heavy-duty warming rack was made to replace the porcelain coated steel racks found on BBQ grills made by The Great Outdoors Grill Company, but can be used in many other different grills.

• Far superior to the original porcelain coated steel rack
• Rests on your existing cooking grids.
• Solid 1/4” 304 stainless steel rods.
• Stands 3.75 inches tall.
• Made in USA .

WARNING: Before ordering this universal rack, please verify your grill has enough space to accommodate it. If you need to return, you will be responsible for return shipping, and the original out bound shipping fee will be deducted from the refund. What's required?

• Your grill needs to be at least 24” wide on the inside . The warming rack is 6.25” front to back and stands 3.75” tall.
• Notice the shape of the warming rack. Determine if the lid of your grill can easily close with the warming rack inside along with food placed on top of the rack.
  
  Part Number: CLA-WS0040
  Dimensions: 6 1/4” x 22 7/8”
  Material: stainless steel
  Weight: 4.8

Round heat indicator.

• Single probe
• 3” diameter
• Requires 3/8” mounting hole

Replaces Lowes factory part# MF-102-02002

Part Number: 00016
Dimensions: 3” x 3”
Weight: 0.2

Bracket for heat plates, screws & nuts included. Four needed per grill, SOLD INDIVIDUALLY. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0330
Dimensions: 2 5/8” x 1 1/16”
Material: stainless steel
Weight: 0.05

shishkebob skewers

Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.

Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7