Kirkland Signature PCA-2600L (pre 2006)

12022-R CI H Burner.
Cast iron replacement ”H” burner. Fits older DCS 27” grills by Dynamic Cooking Systems.

Replaces original DCS burner part# 12022.

Includes Air Shutter part# DCS-12003-02-R.

Part Number: DCS-12022-R1
Dimensions: 16” x 6 1/4”
Material: cast iron
Weight: 10.9

304 Stainless steel 15,000 BTU infrared rotissierie burner. For use with both liquid propane (LP) and natural gas grills. Orifice not included. Use old orifice or purchase our orifice part# CLA-VL0251 for LP, or part# CLA-VB0246 for natural gas applications.

Dimensions:

• Maximum overall length, including mounting tab on one end: 20 7/8”
• Maximum width: 3 3/8”

Replaces Kirkland factory part# DCS-12021-1

Part Number: CLA-BS0250
Dimensions: 3 3/8” x 20”
Material: stainless steel and ceramic
Weight: 3.50

Heavy duty stainless steel cooking grids.

• Premium grade stainless steel.
• Heavy duty 5/16” rods.
• Sold as a set of two

Part Number: 5S182
Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 24 5/8”
Material: stainless steel wire
Weight: 12.10

DCS-19060-R Stainless steel Grill Rack for some DCS-made grills.

• 304 commercial grade stainless steel
• 1/4” solid stainless rods
• Dimensions: 18” x 11 7/8”
• Made in USA .
• Sold individually.

NOTE: This grill rack is slightly narrower than the original DCS-made Kirkland PCA-2600 series grill racks..

Replaces Kirkland factory part# DCS-19060

Part Number: DCS-19060-R
Dimension Front-to-Back: 18”
Dimension Side-to-Side: 11 7/8”
Material: stainless steel
Weight: 4.2

Stainless steel heat plate (radiant).. Replaces OEM part# 30923. Sold individually. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0043
Dimension Front-to-Back: 17”
Dimension Side-to-Side: 11 3/8”
Material: stainless steel
Weight: 2.3

16190-R KIT, ROTARY IGNITER & KNOB BBQ. Single outlet rotary igniter for DCS Professional Series grills by Dynamic Cooking Systems.

• Replaces factory part# 16190
• Includes Igniter, knob, and mounting screws

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DCS-16190-R
Weight: 0.2

Igniter electrode kit. Sold individually. Fits both left and right hand side.

Includes:
• Collector box (replaces OEM part 32801 and 32210-01)
• Electrode with ceramic insulator and 30” wire (replaces OEM parts 16281, 16281-02, and 16281-03)
• Small sex change wire with female spade connector and male round connector. Required for some grills that use a female spade connection to the ignitor.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04850
Material: ceramic
Weight: 0.2

Brass valve for DCS.

• For LP and natural gas grills (see below)
• Off position D-Value: 12 o'clock
• Stem diameter: 8mm
• Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Replaces Kirkland factory part# DCS-13017

Part Number: 30171
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

#59 brass orifice for rotisserie burner. Fits liquid propane (LP) gas grills. Includes brass elbow with 1/4” compression fitting.

Part Number: CLA-VL0251
Material: brass
Weight: 0.15

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

Deluxe 17” stainless steel turner.

• Soft comfort rubber grip
• Stainless steel blade

Part Number: 43108
Material: stainless steel
Weight: 0.10

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Aluminum foil grilling trays. Package of three.

• Heavy duty aluminum foil
• Re-usable
• Great for grilling delicate foods like fish and veggies

Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1