Kenmore 415.15476

Shopping cart
replacement grill parts for all BBQ brands including DCS, Members Mark, Masterforge, Ducane, Kenmore, Broilmaster and more.Shopping cart
 
   Home > Kenmore Grill Models > Kenmore 415.15476



Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Kenmore grill.

Replacement grill parts to fit Kenmore model: 415.15476


 

415.15476 Venturis

Spider exclusion screens. Installs over venturi air shutters to keep spiders out. Approximately 7/8” in diameter and 1” long.

Part Number: 70002
Dimensions: 1” x 7/8”
Material: stainless steel
Weight: 0.1

$12.82

Qty
 






 

415.15476 Cooking Grids

Commercial grade 304 stainless steel cooking grid with 1/4” diameter rods. Made in USA .

Replaces Kenmore factory part# 4152739



Part Number: CG-45SS
Dimension Front-to-Back: 14”
Dimension Side-to-Side: 24”
Material: Stainless steel
Weight: 6.0

$83.82

Qty
 




Premium quality stainless steel cooking grid. Far superior to the porcelain coated steel grids it replaces.
  • Made in USA
  • 304 commercial grade stainless steel
  • Solid .225 diameter stainless rods
  • Sold individually


Part Number: 55701-SS
Dimension Front-to-Back: 14”
Dimension Side-to-Side: 24”
Material: stainless steel
Weight: 5.0

$83.82

Qty
 




ONE PANEL. Genuine OEM cast iron cooking grid, single panel.

Part Number: 10225-T406
Dimension Front-to-Back: 14 1/8”
Dimension Side-to-Side: 12 1/4”
Material: Cast iron
Weight: 4.75

$43.93

Qty
 






 

415.15476 Vaporiser Bar

Stainless steel Vaporiser Bar (heat plate). Fits Charbroil MasterFlame series 7000 grills, others.

Replaces Kenmore factory part# 4156417



Part Number: 94171
Dimension Front-to-Back: 23 7/16”
Dimension Side-to-Side: 2 1/2”
Material: stainless steel
Weight: 0.6

$19.81

Qty
 






 

415.15476 Igniter Components

Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers 115C2, 12102, 11512, and 12112.
Includes:
  • Gas collector box
  • Ceramic electrode and connecting wire with male round connector
  • Mounting nuts and bolts

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Kenmore factory part# 4153746



Part Number: 04400R
Weight: 0.3

$9.34

Qty
 




Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers BBC, LBBC, TBBC, and TLBBC.
    Includes:
  • Gas collector box
  • Ceramic electrode and wire
  • Mounting hardware

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Kenmore factory part# 5156105



Part Number: IG-11B
Weight: 0.3

$9.34

Qty
 




Push-Button self-grounding piezo spark generator; requiers 3/4” mounting hole. Primary connector is a round male connector, so connecting wire needs to be female round connector. If needed, see part# 03199C for a short adapter wire that converts flat female spade connectors to female round. Secondary connector is a flat male spade connector used to conduct spark to a secondary electrode, such as a side burner, or used as a ground in some applications. See ground wire part# 03620. For more information, see our article Ignition 101.

Replaces Kenmore factory part# 4153714



Part Number: 03120
Weight: 0.1

$9.74

Qty
 




Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03199C
Weight: 0.05

$4.37

Qty
 




25” wire with female spade connector on one end, and female round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is round connector to electrode, spade (flat) connector to igniter.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03400
Weight: 0.1

$5.31

Qty
 




Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

  • Wire has female spade connector on one end and square plastic connector on the other
  • Square plastice connector attaches to spark generator
  • Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.



Part Number: 03610
Weight: 0.05

$9.07

Qty
 




14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03620
Weight: 0.1

$6.55

Qty
 




Snap In Piezo Ignitor. Fits Weber Genesis Silver A,B,C and Newer Spirit E310 & E320.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: UP-9B
Weight: 0.2

$8.38

Qty
 






 

415.15476 Warming Racks

Chrome steel bottom warming rack for Charbroil 7000 series U-burner grills for Kenmore model 415.15476.

Replaces Kenmore factory part# 4152124



Part Number: 02124
Dimensions: 23 1/2” x 10 1/2”
Material: chrome steel wire
Weight: 1.10

$30.51

Qty
 






 

415.15476 Accessories

HOW TO GRILL The Complete Illustrated Book of Barbecue Techniques. Steve Raichlen presents a full-color, step-by-step technique book that gets to the core of the grilling experience by showing and telling exactly how it's done. With more than 1,000 photographs, if features over 100 techniques and recipes, from how to set up a three-zone fire to how to grill a perfect prime rib, to grilling pizza, shellfish, vegetables, tofu, fruit, and s'mores.

Part Number: 0-7611-2014-9
Dimensions: 8” x 9 1/4”
Material: Paperback
Weight: 3.0
 

$20.09

Qty
 




20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

 $14.99

Qty
 




Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.



Part Number: 14950
Material: stailess steel
Weight: 0.5

$14.41

Qty
 




Cast aluminum griddle

Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0
  $27.83

Qty
 




Deluxe venturi brush with 11” coil spring flexible shaft

Part Number: 77310
Weight: 0.3

$9.31

Qty
 





Kenmore 415.15476 - 05-Sep-24



We ship Kenmore BBQ parts worldwide

Back to Kenmore grill parts



GRILLING  ACCESSORIES
Briquettes & Lava Rock
Grill Covers
Grilling Tools
Basting and Cleaning brushes
Wood Chips and Smoker Trays
Grid Toppers, Griddles & Racks
Fish and burger baskets
Grill and Tank Accessories
Shish-kebab Sets & Skewers
Grilling & outdoor cooking books

USA shipping for orders of gas grill parts of $49 or more for Kenmore gas BBQ grills (contiguous 48 states only)

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Thursday, September 5, 2024

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.

Help Center     About Us     Contact us     Shipping Policy     Return Policy     Privacy Policy