Home > Kenmore Grill Models > Kenmore 258.2318171
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Kenmore grill.
Part diagrams and owners manuals for Kenmore model: 258.2318171
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement gas grill parts for Kenmore model: 258.2318171
258.2318171 Venturis
Straight adjustable single venturi.
- Adjusts from 7” to 10”.
- Requires minimum 1 7/8” hole in grill bottom for venturi to pass thru. For grills with smaller holes, see venturi part# 72401.
- Can be used in pairs for twin venturi applications.
. Includes all necessary gaskets and screws/nuts.
Part Number: 70401
Dimensions: 10
Material: zinc plated steel
Weight: 0.6
$19.87
AIR SHUTTER for Kenmore model 258.2318171.
Part Number: 10787-6
Weight: 0.05
$1.08
straight adjustable single venturi. Includes all necessary gaskets and screws/nuts.
Replaces Kenmore factory part# 10420-16
Part Number: 70301
Dimensions: 7
Material: zinc plated steel
Weight: 0.5
$17.98
Single Gasket Kit Economy Burners for Kenmore model 258.2318171.
Part Number: SHK4
Weight: 0.01
$4.02
258.2318171 Cooking Grids
Porcelain steel
cooking grid.
Porcelain enameled, glossy finish. Sold individually.
Replaces Kenmore factory part# 10225-48
Part Number: 50301
Dimension Front-to-Back: 13 1/16”
Dimension Side-to-Side: 19 5/8”
Material: porcelain steel wire
Weight: 4.4
$51.29
258.2318171 Rock Grates
carbon steel
rock grate for Kenmore model 258.2318171.
Replaces Kenmore factory part# 10222-21
Part Number: 91601
Dimensions: 12 1/2” x 21 11/32”
Material: steel wire
Weight: 3.8
$28.47
258.2318171 Knobs and Handles
Silver faced knob. Fits Falcon single control grills.
- Off position D-Value: 6:00 o'clock
- Knob diameter: 2”
- Socket diameter: 5/16”
- Knob shaft: 1/2”
Replaces Kenmore factory part# 10472-32
Part Number: K-5B
Dimensions: 2
Material: N/A
Weight: 0.1
$13.95
258.2318171 Valves, Orifices, and Manifolds
In post control valve without manifold or orifice, accepts accepts common 5/16” x 32
spud orifice. Fits Arkla and most twin in post control grills with
spud orifice. Orifice not included.
Replaces Kenmore factory part# 10691-31
Part Number: 38700
Dimensions: 3 1/8” x 1 3/8”
Material: brass
Weight: 0.3
$28.50
258.2318171 Accessories
BBQ'er choice porcelain grill briquets. The finest available.
- Self-Cleaning Porcelain Briquettes.
- Made of fired porcelain for even heat transfer.
- Virtually indestructible.
- About 56 pieces covers approximately 310 square inches.
- Made in USA .
NOTE: MHP model TJK requires two (2) bags.
Part Number: BQ-3A
Weight: 4.2
$50.25
Durable 2 5/16” round briquettes
- Self-cleaning
- Control flare-ups while holding an even heat pattern.
- About 53 pieces, covers approximately 275 sq. inches.
- Fits all gas grills
Part Number: BQ-5
Weight: 7.2
$31.19
Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.
Part Number: 45887
Material: pummise
Weight: 7.0
$24.48
Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.
Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90
$25.40
50-piece ceramic briquette set. Works in all grills designed for briquettes or lava rock. Fits briquette tray parts
94751,
92571 and other simular trays.
Part Number: 41650
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.2
$49.94
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.
- Ideal for cooking pieces of meat or vegetables
- Self basting, easy to use
- Locks on spit rod with thumb screw (supplied)
- 6 1/2” x 10” long
Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1
$19.30
deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.
Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7
$25.57