Home > Kenmore Grill Models > Kenmore 119.16144210Kenmore 4-Burner LP gas grill with side burner
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Kenmore grill.
Part diagrams and owners manuals for Kenmore model: 119.16144210
Click small image to enlarge. Click Large image to reduce.
Double click for new window |
| |
Replacement grill parts to fit Kenmore model: 119.16144210
119.16144210 Burners
Stainless steel burner for Kenmore model 119.16144210.
Replaces Kenmore factory part# MCDSBRE000
Part Number: 14421
Dimensions: 15 3/4” x 1”
Material: stainless steel
Weight: 0.6
$35.92
119.16144210 Cooking Grids
Stainless steel
cooking grids. Sold as a set of three (3).
Replaces Kenmore factory part# MCDSBRC000
Part Number: 5S443
Dimension Front-to-Back: 18 5/8”
Dimension Side-to-Side: 25 11/16”
Material: stainless steel tubes
Weight: 7.7
$124.24
119.16144210 Heat Diffusers
Porcelain steel Heat Diffuser. Sold individually.
Replaces Kenmore factory part# MCDSBRB025
Part Number: 91521
Dimension Front-to-Back: 16 1/4”
Dimension Side-to-Side: 4 1/8”
Material: porcelain steel
Weight: 1.0
$24.59
119.16144210 Igniter Components
46” Wire with female
spade connectors and square plastic connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-30B
Dimensions: 46
Weight: 0.1
$7.10
Universal battery powered push button ignitor.
- 1.5 volt
- Has five (5) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Kenmore factory part# MCDSFID001
Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7
$39.86
Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04022-X2, X3, X4, and X5.
Replaces Kenmore factory part# SE9009
Part Number: 04022
Material: ceramic
Weight: 0.1
$7.13
36” wire with two female
spade connectors for side burner igniters (not for use with rotary or
piezo ignitors).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03500
Weight: 0.05
$5.31
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$9.07
119.16144210 Knobs and Handles
Chrome and black plastic control knob.
- Off position D-Value: 12 o'clock
- Knob diameter: 2 5/16”
- Socket diameter: 8mm
- Knob shaft: None
Replaces Kenmore factory part# PLABS0090-001
Part Number: 02340
Dimensions: 2 5/16” x 2 5/16”
Material: plastic
Weight: 0.1
$13.57
119.16144210 Heat indicators and Meat Thermometers
Heat indicator with a single probe and requires a 5/16” mounting hole. Note, the back side DOES NOT have an alignment pin.
Replaces Kenmore factory part# MCDKCVW000
Part Number: 00021
Dimensions: 3 5/8” x 1 3/4”
Weight: 0.2
$15.90
119.16144210 Accessories
Texas hickory flavor wood chips. 800g.
Part Number: 00220
Weight: 2.0
$6.87
20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.
Part Number: 40269
Material: stainless steel
Weight: 0.14
$14.99
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$6.64
Upright porcelain steel roasting rack with grid topper.
Part Number: 40935
Weight: 2.9
$31.80 $21.99
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.5
$17.59
USA shipping for orders of gas grill parts of $49 or more for Kenmore gas BBQ grills (contiguous 48 states only)