Parts for Home Depot DGB610SSP

Home > Home Depot Grill Models > Home Depot DGB610SSP

Dyna-Glo model DGB610SSP 6-Burner LP Gas Grill with Side Burner

Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Home Depot grill.

Replacement grill parts for Home Depot model: DGB610SSP

DGB610SSP Burners

70-01-282-R-X6 Main Burner. Set of six (6). Stainless steel. Fits Dyna-Glo grill models including:

DGB494SPB
DGB494SDP
DGB515SDP
DGB610SSP
DGF493BNP
DGF510SBP

May fit other models.

This part replaces original Dyna-Glo burner # 70-01-282.

Part Number: DG1-70-01-282-R-X6
Dimensions: 16 9/16” x 1”
Material: stainless steel
Weight: 3.7

stainless steel burner for Home Depot model DGB610SSP

$163.44

70-01-282-R Main Burner. Stainless steel. Fits Dyna-Glo grill models including:

DGB494SPB
DGB494SDP
DGB515SDP
DGB610SSP
DGF493BNP
DGF510SBP

May fit other models.

This part replaces original Dyna-Glo burner # 70-01-282.

Part Number: DG1-70-01-282-R
Dimensions: 16 9/16” x 1”
Material: stainless steel
Weight: 0.6

$33.45

All Home Depot Burners

DGB610SSP Cooking Grids

Cast iron cooking grid set. Porcelain enameled, glossy finish. Sold as a set of three (3).

Part Number: 68253
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 34 1/8”
Material: gloss cast iron
Weight: 15.0

$155.99

All Home Depot Cooking Grids

DGB610SSP Heat Tents

70-01-179-R-X6 Heat tent. Set of six (6). Porcelain enameled steel.

Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 70-01-179.

Part Number: DG1-70-01-179-R-X6
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 13/16”
Material: porcelain steel
Weight: 0.8

$112.98

70-01-179-R Heat tent. Porcelain enameled steel. Sold individually.

Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 70-01-179.

Part Number: DG1-70-01-179-R
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 13/16”
Material: porcelain steel
Weight: 0.8

$23.58

70-01-179-SS-X6 Heat tent. Set of six (6). Stainless steel.

Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.

This stainless heat tent replaces original Dyna-Glo part 70-01-179.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Made in USA About our made-in-the-USA Home Depot grill parts

Part Number: DG3-70-01-179-SS-X6
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 4.2

$83.88

70-01-179-SS Heat tent. Stainless steel. Sold individually.

Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.

This stainless heat tent replaces original Dyna-Glo part 70-01-179.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Made in USA About our made-in-the-USA Home Depot grill parts

Part Number: DG3-70-01-179-SS
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 0.70

$23.42

All Home Depot Heat Tents

DGB610SSP Igniter Components

Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.

Wire not included. Commonly used with wire part# 03610.
Female spade connector on wire connects to male spade connector of electrode.
If used with existing wire, confirm connecting end of wire is a female spade connector
Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04010-X2, X3, X4, and X5.

Part Number: 04010
Material: ceramic
Weight: 0.05

$6.55

All Home Depot Igniter Components

DGB610SSP Heat indicators and Meat Thermometers

Oval lid heat indicator. Mounts to grill with single 1.25” long threaded temperature probe in center.

Replaces Home Depot factory part# DYG-70-04-100

Part Number: 072-6800-0
Dimensions: 2 15/16” x 1 7/8”
Material: stainless steel
Weight: 0.2

$9.95

All Home Depot Heat indicators and Meat Thermometers

DGB610SSP Accessories

Skewers for part 92339 kebob tray.

Part Number: 11040
Weight: 0.4

$4.75

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Material: chrome steel
Weight: 0.9

$16.59

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

$14.41

Cast aluminum griddle

Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0

$27.83

Deluxe venturi brush with 11” coil spring flexible shaft

Part Number: 77310
Weight: 0.3

$9.31

All Accessories

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Thursday, September 5, 2024

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.