Home Depot DGB390BNP-D

104-13011-R-X3 Main Burner.. Set of three (3). Stainless steel. Fits Dyna-Glo DGB390, DGB730, and M365 series grills including:

• DGB390BNP
• DGB390SNP
• DGB730SNB
• M365 Series

May fit other models.

This part replaces original Dyna-Glo burner # 104-13011.

Part Number: DG1-104-13011-R-X3
Dimensions: 16 3/8” x 1”
Material: stainless steel
Weight: 0.5

104-13011-R Main Burner. Stainless steel. Fits Dyna-Glo DGB390, DGB730, and M365 series grills including:

• DGB390BNP
• DGB390SNP
• DGB730SNB
• M365 Series

May fit other models.

This part replaces original Dyna-Glo burner # 104-13011.

Part Number: DG1-104-13011-R
Dimensions: 16 3/8” x 1”
Material: stainless steel
Weight: 0.5

104-13003-R-X3 Heat tent. Set of three (3). Porcelain enameled steel.

Fits Dyna-Glo DGB390 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 104-13003.

Part Number: DG1-104-13003-R-X3
Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: porcelain steel
Weight: 1.0

104-13003-R Heat tent. Porcelain enameled steel. Sold individually.

Fits Dyna-Glo DGB390 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 104-13003.

Part Number: DG1-104-13003-R
Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: porcelain steel
Weight: 1.0

104-13007-R Electronic ignition. Three-outlet battery powered push button ignitor. Fits Dyna-Glo DGB390 series grills. May fit other models.

• 1.5 volt
• Has three (3) terminals (male spade connector)
• Uses a single AAA battery (not included)
• Requires 3/4” mounting hole

This Electronic Ignition Module replaces original Dyna-Glo part 104-13007.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-104-13007-R
Dimensions: 2 9/16” x 2”
Weight: 0.5

104-13012-R-X3 Ignition electrode and ignition wire assembly. Set of three (3). Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGB390 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 104-13012.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-104-13012-R-X3
Material: ceramic
Weight: 0.1

104-13012-R Ignition electrode and ignition wire assembly. Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGB390 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 104-13012.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-104-13012-R
Material: ceramic
Weight: 0.1

Push-button electronic igniter with three (3) spade connectors. Comes with sliver or black cap per availability. Needs (1) AA battery (not included); requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG3007
Weight: 0.2

Universal premium quality stainless steel warming rack. You simply can't buy a better quality warming rack than this, which weighs in at almost 5lbs of solid 304 grade stainless steel. This super heavy-duty warming rack was made to replace the porcelain coated steel racks found on BBQ grills made by The Great Outdoors Grill Company, but can be used in many other different grills.

• Far superior to the original porcelain coated steel rack
• Rests on your existing cooking grids.
• Solid 1/4” 304 stainless steel rods.
• Stands 3.75 inches tall.
• Made in USA .

WARNING: Before ordering this universal rack, please verify your grill has enough space to accommodate it. If you need to return, you will be responsible for return shipping, and the original out bound shipping fee will be deducted from the refund. What's required?

• Your grill needs to be at least 24” wide on the inside . The warming rack is 6.25” front to back and stands 3.75” tall.
• Notice the shape of the warming rack. Determine if the lid of your grill can easily close with the warming rack inside along with food placed on top of the rack.
  
  Part Number: CLA-WS0040
  Dimensions: 6 1/4” x 22 7/8”
  Material: stainless steel
  Weight: 4.8

Round heat indicator.

• Single probe
• 3” diameter
• Requires 3/8” mounting hole

Replaces Home Depot factory part# DYG-104-12005

Part Number: 00016
Dimensions: 3” x 3”
Weight: 0.2

6 chrome plated 18” shish-ke-bab skewers

Part Number: 63371
Weight: 0.2

15” Stainless steel tong.

• Soft comfort grip
• Locking mechanism

Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

economy basting brushes. Two brushes, 7.5” long.

Part Number: 43054
Weight: 0.1

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

Grill Mitt With Neoprene Palm.

16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most

Part Number: 90963
Weight: 0.5