Home Depot DGA550SSP-D

113-03003-R-X5 Main Burner, set of five (5). Stainless steel. Fits Dyna-Glo DGA480 series grills including:

• DGA480BSP
• DGA480SSP
• DGA550SSP

May fit other models.

This part replaces original Dyna-Glo burner # 113-03003.

Part Number: DG1-113-03003-R-X5
Dimensions: 16 3/8” x 1”
Material: stainless steel
Weight: 2.6

113-03003-R Main Burner. Stainless steel. Fits Dyna-Glo DGA480 series grills including:

• DGA480BSP
• DGA480SSP
• DGA550SSP

May fit other models.

This part replaces original Dyna-Glo burner # 113-03003.

Part Number: DG1-113-03003-R
Dimensions: 16 3/8” x 1”
Material: stainless steel
Weight: 0.5

153-03005-R-X5 Heat tent. Set of five (5). Porcelain enameled steel.

Fits Dyna-Glo DGA550 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 153-03005.

Part Number: DG1-153-03005-R-X5
Dimension Front-to-Back: 15 9/16”
Dimension Side-to-Side: 5”
Material: porcelain steel
Weight: 1.0

153-03005-R Heat tent. Porcelain enameled steel. Sold individually.

Fits Dyna-Glo DGA550 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 153-03005.

Part Number: DG1-153-03005-R
Dimension Front-to-Back: 15 9/16”
Dimension Side-to-Side: 5”
Material: porcelain steel
Weight: 1.0

Universal battery powered push button ignitor.

• 1.5 volt
• Has six (6) terminals (male spade connector)
• Uses a single AA battery (not included))
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Home Depot factory part# DYG-153-03023

Part Number: 03350
Weight: 0.7

113-03020-R-X5 Ignition electrode and ignition wire assembly. Set of five (5). Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGA480 and DGA550 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo Electrode 113-03020 and Wire 113-03017.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-113-03020-R-X5
Material: ceramic
Weight: 0.1

113-03020-R Ignition electrode and ignition wire assembly. Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGA480 and DGA550 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo Electrode 113-03020 and Wire 113-03017.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-113-03020-R
Material: ceramic
Weight: 0.1

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

Universal premium quality stainless steel warming rack. You simply can't buy a better quality warming rack than this, which weighs in at almost 5lbs of solid 304 grade stainless steel. This super heavy-duty warming rack was made to replace the porcelain coated steel racks found on BBQ grills made by The Great Outdoors Grill Company, but can be used in many other different grills.

• Far superior to the original porcelain coated steel rack
• Rests on your existing cooking grids.
• Solid 1/4” 304 stainless steel rods.
• Stands 3.75 inches tall.
• Made in USA .

WARNING: Before ordering this universal rack, please verify your grill has enough space to accommodate it. If you need to return, you will be responsible for return shipping, and the original out bound shipping fee will be deducted from the refund. What's required?

• Your grill needs to be at least 24” wide on the inside . The warming rack is 6.25” front to back and stands 3.75” tall.
• Notice the shape of the warming rack. Determine if the lid of your grill can easily close with the warming rack inside along with food placed on top of the rack.
  
  Part Number: CLA-WS0040
  Dimensions: 6 1/4” x 22 7/8”
  Material: stainless steel
  Weight: 4.8

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.

Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6

Deluxe venturi brush with 11” coil spring flexible shaft

Part Number: 77310
Weight: 0.3