Home Depot 810-7440-F

Adjustable universal front-to-back tube burner with top-ported flame holes. This burner may not work with existing ignition electrodes and back burner cross-overs.

• Variable length burner adjusts from 13 1/2” to 17 1/2”.
• Includes extra hardware and mounting brackets to accommodate almost all grills.
• Comes with complete installation instructions and diagrams.

WARNING: Before ordering this universal burner, please verify that it will work in your grill per the specifications above. If you order this universal burner and it does not work in your grill, please review our Return Policy for ”Ordered Wrong Part.” You will be responsible for all shipping fees.

Part Number: FP-BR1001
Material: stainless steel
Weight: 0.7

Stainless steel tube burner. Includes

• SS tube burner
• Spider exclusion screen
• Adjustable air shutter.

WARNING: This burner is also a functional replacement for burner # 14041 that had a 1.25” diameter and has been discontinued. Please inspect the diameter of your old burner to determine if this matters to you before ordering.

Part Number: 14011
Dimensions: 16 3/16” x 1”
Material: stainless steel
Weight: 0.8

Premium quality stainless steel tube burner. Sold individually, number required varies by grill.

Replaces Home Depot factory part# 154-6430-0

Part Number: CLA-BS0200
Dimensions: 15 3/4” x 1”
Material: stainless steel
Weight: 0.3

Main burner support bracket. Replaces Brinkmann OEM part# 600-6431-B. Made in USA .

Part Number: CLA-MX0046
Dimensions: 24 5/16
Material: stainless steel
Weight: 0.8

Cast iron cooking grill. Porcelain treated, flat matte finish. Sold individually, number required varies.

Replaces Home Depot factory part# 115-2300-0

Part Number: 66662-1PC
Dimension Front-to-Back: 19”
Dimension Side-to-Side: 12 1/2”
Material: matte cast iron
Weight: 11.25

SET OF THREE/3 PACK Stainless steel Heat Distribution Plates/Flame Tamers. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.e.

Part Number: CLA-TS0156-X3
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 2.1

SET OF FOUR/4 PACK Stainless steel Heat Distribution Plates/Flame Tamers. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.e.

Part Number: CLA-TS0156-X4
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 2.8

Stainless steel Heat Distribution Plate/Flame Tamer. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.e.

Part Number: CLA-TS0156
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 0.70

Porcelain steel Heat Distribution Plate. Sold individually.

Replaces Home Depot factory part# 600-7310-T

Part Number: 97311
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 3 7/8”
Material: porcelain steel
Weight: 0.8

Universal battery powered push button ignitor.

• 1.5 volt
• Has six (6) terminals (male spade connector)
• Uses a single AA battery (not included))
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03350
Weight: 0.7

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

Collector box, ceramic electrode, insulating sleeve, and 14” wire with female space connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Home Depot factory part# 600-7541-B

Part Number: 08300
Material: ceramic
Weight: 0.3

Oval lid heat indicator. Three-hole mount with two threaded studs 1 1/2” offset on center. Requires 3/8” center hole for temperature sensor probe.

Replaces Home Depot factory part# 072-7310-0

Part Number: 22551
Dimensions: 2 15/16” x 1 7/8”
Weight: 0.2

Texas hickory flavor wood chips. 800g.

Part Number: 00220
Weight: 2.0

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Material: chrome steel
Weight: 0.9

economy basting brushes. Two brushes, 7.5” long.

Part Number: 43054
Weight: 0.1

Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.

Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6

Abrasive scrubbing brush. Ideal for cleaning porcelain grills.

Part Number: 71448
Weight: 0.2