Home > Home Depot Grill Models > Home Depot 810-6830-0Charmglow Grill Island 4 Burner Natural Gas
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Home Depot grill.
Part diagrams and owners manuals for Home Depot model: 810-6830-0
Click small image to enlarge. Click Large image to reduce.
Double click for new window |
| |
Replacement grill parts for the Home Depot 810-6830-0
810-6830-0 Burners
Cast iron burner. Sold individually.
Replaces Home Depot factory part# 154-4775-5
Part Number: CIBM
Dimensions: 13 5/8” x 2 1/8”
Material: cast iron
Weight: 4.2
$32.65
810-6830-0 Heat Distribution Plates
SET OF THREE/3 PACK Stainless steel Heat Distribution Plates/Flame Tamers. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.e.
Part Number: CLA-TS0156-X3
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 2.1
$58.41
SET OF FOUR/4 PACK Stainless steel Heat Distribution Plates/Flame Tamers. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.e.
Part Number: CLA-TS0156-X4
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 2.8
$74.84
Stainless steel Heat Distribution Plate/Flame Tamer. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.e.
Part Number: CLA-TS0156
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 0.70
$21.09
Porcelain steel Heat Distribution Plate. Sold individually.
Replaces Home Depot factory part# 600-6805-0
Part Number: 97311
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 3 7/8”
Material: porcelain steel
Weight: 0.8
$26.76 
$17.49
810-6830-0 Igniter Components
Universal battery powered push button ignitor.
- 1.5 volt
- Has five (5) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7
$39.86
Push-button electronic igniter with three (3)
spade connectors. Comes with sliver or black cap per availability. Needs (1) AA battery (not included); requires 7/8” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Home Depot factory part# 119-4400-5
Part Number: TS-IG3007
Weight: 0.2
$35.57
810-6830-0 Heat indicators and Meat Thermometers
Oval lid heat indicator. Mounts to grill with single 1.25” long threaded temperature probe in center.
Part Number: 072-6800-0
Dimensions: 2 15/16” x 1 7/8”
Material: stainless steel
Weight: 0.2
$9.95
810-6830-0 Accessories
Skewers for part 92339 kebob tray.
Part Number: 11040
Weight: 0.4
$4.75
20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.
Part Number: 40269
Material: stainless steel
Weight: 0.14
$14.99
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Cast aluminum griddle
Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0
$27.83
EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.
Part Number: 00030
Weight: 0.1
$7.60
USA shipping (contiguous 48 states only) on all Home Depot part orders $49 and more