Home > Great Outdoors Grill Models > Great Outdoors TG475-2
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Great Outdoors grill.
Part diagrams and owners manuals for Great Outdoors model: TG475-2 (Pinnacle)
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement grill parts to fit Great Outdoors model: TG475-2 (Pinnacle)
TG475-2 (Pinnacle) Burners
Stainless steel tube burner. Includes
Replaces Great Outdoors factory part# 50002681
Part Number: 14751
Dimensions: 17 x 1
Material: stainless steel
Weight: 0.8
$38.24
TG475-2 (Pinnacle) Burner Brackets and Carryovers
Burner support and carry-over bracket. Made in USA
.
Part Number: CLA-MS0261
Dimensions: 22 1/16
Material: stainless steel
Weight: 0.70
$39.16
TG475-2 (Pinnacle) Cooking Grids
Cast iron
cooking grids.
Porcelain treated, flat matte finish. Sold as a set of two (2).
Replaces Great Outdoors factory part# 50002676
Part Number: 67692
Dimension Front-to-Back: 17 3/4
Dimension Side-to-Side: 26
Material: matte cast iron
Weight: 13.2
$98.55
TG475-2 (Pinnacle) Heat Plates
Stainless steel
Heat Plate. Sold individually.
Part Number: 95861
Dimension Front-to-Back: 14 1/2
Dimension Side-to-Side: 3 1/16
Material: stainless steel
Weight: 0.7
$25.99
TG475-2 (Pinnacle) Heat Shields
Porcelain steel heat shield for Great Outdoors model TG475-2.
Part Number: 90151
Dimension Front-to-Back: 14 15/16
Dimension Side-to-Side: 3 3/16
Material: porcelain steel
Weight: 0.8
$26.24
TG475-2 (Pinnacle) Igniter Components
Universal battery powered push button ignitor.
- 1.5 volt
- Has six (6) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8 mounting hole
- Overall dimensions: 2 x 3 3/8 x 3
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03350
Weight: 0.7
$33.56
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47 wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$9.07
14 ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.55
Ceramic igniter electrode with male
spade connector and mounting bracket. Mounts to flange on underside of burner. Fits burners 12041 and 14751.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04010
Material: ceramic
Weight: 0.05
$6.55
TG475-2 (Pinnacle) Grease Trays
Stainless steel grease pan. Includes grease cup and grease cup holder. Made in USA
.
NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.
Replaces Great Outdoors factory part# 50002677
Part Number: CLA-DS0099A
Dimensions: 9 3/4 x 27 1/8
Material: stainless steel
Weight: 3.0
$68.39
TG475-2 (Pinnacle) Knobs and Handles
Universal black control knob. Counter-clockwise bezel.
- Off position D-Value: Selectable
- Knob diameter: 2 1/16
- Socket diameter: 8mm
- Knob shaft: None
Part Number: 01800
Dimensions: 2 1/16 x 2 1/16
Material: plastic
Weight: 0.05
$6.55
Black control knob for Fire Magic Custom, Regal, and Gourmet grills.
- Off position D-Value: 6 o'clock
- Knob diameter: 2
- Socket diameter: 8mm
- Knob shaft: None
Part Number: 01700
Dimensions: 2 x 2
Material: plastic
Weight: 0.1
$10.84
Silver plastic control knob. Replaces original part# 50002552. Can also be used to replace knob part# AZ000703.
- Off position D-Value: 6 o'clock
- Knob diameter: 2 3/16
- Socket diameter: 8mm
- Knob shaft: None
Part Number: 02552
Dimensions: 2 3/16 x 2 3/16
Material: plastic
Weight: 0.1
$13.57
TG475-2 (Pinnacle) Regulators and Hoses
LP regulator with
QCC-1 connection and two 23 hoses for some side burner applications.
- For use on new style QCC-1 tanks.
- Total length is 47
- Both hose ends are SAE 3/8 female flare fittings.
Note: The grill must have a matching SAE 3/8 male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8 fitting is much larger, approximately 5/8. See our
flare fitting description for information on measuring and sizes.
Part Number: 80034
Dimensions: 48 1/2 x 0 1/2
Weight: 1.2
$25.90
TG475-2 (Pinnacle) Warming Racks
Warming rack. Made in USA
Replaces Great Outdoors factory part# 50002675
Part Number: CLA-WS0262
Dimensions: 5 1/2 x 26 1/2
Material: stainless steel
Weight: 1.50
$32.79
TG475-2 (Pinnacle) Heat indicators and Meat Thermometers
Oval lid heat indicator. Mounts to grill with single 1.25 long threaded temperature probe in center.
Part Number: 072-6800-0
Dimensions: 2 15/16 x 1 7/8
Material: stainless steel
Weight: 0.2
$9.95
TG475-2 (Pinnacle) Accessories
Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.
Part Number: 00150
Dimensions: 5 1/4 x 8 3/8
Material: cast iron
Weight: 3.90
$25.40
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Deluxe 13 basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.
- Ideal for cooking pieces of meat or vegetables
- Self basting, easy to use
- Locks on spit rod with thumb screw (supplied)
- 6 1/2 x 10 long
Part Number: 24764
Dimensions: 6 1/2 x 10
Weight: 1.1
$19.30
deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.
Part Number: 70255
Dimensions: 18 5/8 x 3 1/2
Weight: 0.7
$25.57