Fiesta ESD45055-BC347 (Optima)

Shopping cart
replacement grill parts for all BBQ brands including DCS, Members Mark, Masterforge, Ducane, Kenmore, Broilmaster and more.Shopping cart
 
   Home > Fiesta Grill Models > Fiesta ESD45055-BC347

Fiesta Optima Series Twin-Burner LP gas grill with side burner



Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Fiesta grill.

Part diagrams and owners manuals for Fiesta model: ESD45055-BC347 (Optima)



Click small image to enlarge. Click Large image to reduce.
Double click for new window
Grill image for model: ESD45055-BC347 (Optima)
Exploded parts diagram for model: ESD45055-BC347 (Optima)
Exploded parts diagram for model: ESD45055-BC347 (Optima)

Replacement gas grill parts for Fiesta model: ESD45055-BC347 (Optima)


 

ESD45055-BC347 (Optima) Burners

Stainless steel burner and venturi assembly kit. Comes with all necessary gaskets and screws.

Part Number: 19202-79402
Dimensions: 22” x 7 7/8”
Material: stainless steel
Weight: 3.5

$81.20

Qty
 




Stainless steel H burner. Burner consists of two pieces, which are held together by the venturi.

Part Number: 19202
Dimensions: 22” x 7 7/8”
Material: stainless steel
Weight: 2.4

$65.76

Qty
 






 

ESD45055-BC347 (Optima) Venturis

L-shaped venturi pair. Includes all necessary gaskets and screws/nuts.

Part Number: 79402
Dimensions: 5 1/2” x 3 1/8”
Material: zinc plated steel
Weight: 0.9

$20.78

Qty
 




Spider exclusion screens. Installs over venturi air shutters to keep spiders out. Approximately 7/8” in diameter and 1” long.

Part Number: 70002
Dimensions: 1” x 7/8”
Material: stainless steel
Weight: 0.1

$12.82

Qty
 






 

ESD45055-BC347 (Optima) Rock Grates

carbon steel rock grate for Fiesta model ESD45055-BC347.

Part Number: 91301
Dimensions: 12” x 22 3/4”
Material: steel wire
Weight: 3.11

$42.92

Qty
 






 

ESD45055-BC347 (Optima) Heat Plates

SET OF THREE/3 PACK Stainless steel heat plate/Flame Tamer. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0234-X3
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 5 1/8”
Material: stainless steel
Weight: 3.0

$82.17

Qty
 






 

ESD45055-BC347 (Optima) Smart Bars

Stainless steel version replacement for original Smart Bar SP25-9G. NOTE: The original part was porcelain coated steel. Far superior to the original, this aftermarket part is made of corrosion-resistant stainless steel for longer life.
TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive late Aug.

Part Number: SP25-9G-SS
Dimension Front-to-Back: 10 1/2”
Dimension Side-to-Side: 23 3/4”
Material: stainless steel
Weight: 3.0

$74.78

Qty
 






 

ESD45055-BC347 (Optima) Igniter Components

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: TS-IG4010
Weight: 0.2

$18.48

Qty
 




46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-30B
Dimensions: 46
Weight: 0.1

$7.10

Qty
 




Universal 2 5/8” adapter wire with female round and male spade connectors. Primarily used when connecting spark generators (ignitors) to electrode wires with unlike connectors. Typically, push-button and rotory piezo spark generators have male round connectors, while battery operated electronic spark generators usually have male spade connectors.
  • Can change male round to male spade
  • Can change female spade to female round
ALL

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03198
Weight: 0.05

$5.31

Qty
 




Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

  • Wire has female spade connector on one end and square plastic connector on the other
  • Square plastice connector attaches to spark generator
  • Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.



Part Number: 03610
Weight: 0.05

$9.07

Qty
 




14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03620
Weight: 0.1

$6.55

Qty
 




Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-15B
Weight: 0.3

$14.41

Qty
 




Battery powered push button igniter.
  • Has four (4) spade type male connectors.
  • Uses 1 AAA battery (not supplied)
  • Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Fiesta factory part# SP5010-20



Part Number: IGEIB4-B
Weight: 0.3

$34.08

Qty
 




Universal four-outlet battery powered push button ignitor.
  • 1.5 volt
  • Has four (4) terminals (male spade connector)
  • Uses a single AA battery (not included)
  • 03610 and 03620 wires are commonly used with this igniter (not included)
  • Requires 7/8” mounting hole
  • Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Fiesta factory part# SP5010-20



Part Number: 03340
Weight: 0.5

$31.50

Qty
 




ELECTRODE CLIP-ON

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: SP9A-20
Weight: 0.4

$4.30

Qty
 






 

ESD45055-BC347 (Optima) Knobs and Handles

HANDLE 450 D LID COPPER for Fiesta model ESD45055-BC347.

Part Number: SM5050-42C
Weight: 1.0
Image not available

$24.00

Qty
 




KNOB DELUXE for Fiesta model ESD45055-BC347.

Part Number: SP10-7
Weight: 1.0

$5.15

Qty
 




Side burner knob.
  • Off position D-Value: 6 o'clock
  • Knob diameter: 2 3/16”
  • Socket diameter: 5/16”
  • Knob shaft: 1/8”


Part Number: SP9-7
Weight: 0.1

$5.15

Qty
 






 

ESD45055-BC347 (Optima) Warming Racks

Universal warming rack. For use on grills with at least 22” inside dimension.

Part Number: AP-6A
Dimensions: 6” x 21 1/2”
Material: Chrome steel
Weight: 1.3

$23.33

Qty
 






 

ESD45055-BC347 (Optima) Valves, Orifices, and Manifolds

VHR ASSEMBLY 40058 for Fiesta model ESD45055-BC347.

Part Number: SP150A-4
Weight: 1.0
Image not available

$61.15

Qty
 






 

ESD45055-BC347 (Optima) Miscellaneous Repair Parts

SMART ROD 345/400/450 for Fiesta model ESD45055-BC347.

Part Number: SM68-6
Dimensions: 12
Weight: 0.3

$2.48

Qty
 






 

ESD45055-BC347 (Optima) Accessories

Durable 2 5/16” round briquettes
  • Self-cleaning
  • Control flare-ups while holding an even heat pattern.
  • About 53 pieces, covers approximately 275 sq. inches.
  • Fits all gas grills


Part Number: BQ-5
Weight: 7.2

$31.19

Qty
 




Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.

Part Number: 45887
Material: pummise
Weight: 7.0

$24.48

Qty
 




Texas hickory flavor wood chips. 800g.

Part Number: 00220
Weight: 2.0

$6.87

Qty
 




Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.

Part Number: 45887
Material: pummise
Weight: 7.0

$24.48

Qty
 




15” Stainless steel tong.
  • Soft comfort grip
  • Locking mechanism


Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

$9.92

Qty
 




economy basting brushes. Two brushes, 7.5” long.

Part Number: 43054
Weight: 0.1

$6.64

Qty
 




Aluminum foil grilling trays. Package of three.
  • Heavy duty aluminum foil
  • Re-usable
  • Great for grilling delicate foods like fish and veggies


Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4

$8.64

Qty
 




Abrasive scrubbing brush. Ideal for cleaning porcelain grills.

Part Number: 71448
Weight: 0.2

$5.96

Qty
 





Fiesta model ESD45055-BC347. If the BBQ grill part you are looking for is not listed above, make a note
of the dimensions of your original part and try searching by part category. 05-Sep-24

ESD45055BC347

We ship Fiesta BBQ parts worldwide

Back to Fiesta grill parts



GRILLING  ACCESSORIES
Briquettes & Lava Rock
Grill Covers
Grilling Tools
Basting and Cleaning brushes
Wood Chips and Smoker Trays
Grid Toppers, Griddles & Racks
Fish and burger baskets
Grill and Tank Accessories
Shish-kebab Sets & Skewers
Grilling & outdoor cooking books

USA shipping for orders of gas grill parts of $49 or more for Fiesta gas BBQ grills (contiguous 48 states only)

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Thursday, September 5, 2024

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.

Help Center     About Us     Contact us     Shipping Policy     Return Policy     Privacy Policy