Dyna-Glo DGF510SBP

70-01-282-R-X5 Main Burner. Set of five (5). Stainless steel. Fits Dyna-Glo grill models including:

• DGB494SPB
• DGB494SDP
• DGB515SDP
• DGB610SSP
• DGF493BNP
• DGF510SBP

May fit other models.

This part replaces original Dyna-Glo burner # 70-01-282.

Part Number: DG1-70-01-282-R-X5
Dimensions: 16 9/16” x 1”
Material: stainless steel
Weight: 3.1

70-01-282-R Main Burner. Stainless steel. Fits Dyna-Glo grill models including:

• DGB494SPB
• DGB494SDP
• DGB515SDP
• DGB610SSP
• DGF493BNP
• DGF510SBP

May fit other models.

This part replaces original Dyna-Glo burner # 70-01-282.

Part Number: DG1-70-01-282-R
Dimensions: 16 9/16” x 1”
Material: stainless steel
Weight: 0.6

70-01-293-R Cooking Grate. Porcelain enameled glossy finish cast iron grates. Sold as a 3-piece set.

Fits Dyna-Glo DGB515 and DGF515 series grills. May fit other models.

This grate replaces original Dyna-Glo part 70-01-293.

Part Number: DG1-70-01-293-R
Dimension Front-to-Back: 16 1/4”
Dimension Side-to-Side: 29 5/8”
Material: gloss cast iron
Weight: 11.3

70-01-179-R-X5 Heat tent. Set of five (5). Porcelain enameled steel.

Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 70-01-179.

Part Number: DG1-70-01-179-R-X5
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 13/16”
Material: porcelain steel
Weight: 0.8

70-01-179-R Heat tent. Porcelain enameled steel. Sold individually.

Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 70-01-179.

Part Number: DG1-70-01-179-R
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 13/16”
Material: porcelain steel
Weight: 0.8

70-01-179-SS-X5 Heat tent. Set of five (5). Stainless steel.

Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.

This stainless heat tent replaces original Dyna-Glo part 70-01-179.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Made in USA

Part Number: DG3-70-01-179-SS-X5
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 3.5

70-01-179-SS Heat tent. Stainless steel. Sold individually.

Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.

This stainless heat tent replaces original Dyna-Glo part 70-01-179.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Made in USA

Part Number: DG3-70-01-179-SS
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 0.70

Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.

• Wire not included. Commonly used with wire part# 03610.
• Female spade connector on wire connects to male spade connector of electrode.
• If used with existing wire, confirm connecting end of wire is a female spade connector
• Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04010-X2, X3, X4, and X5.

Part Number: 04010
Material: ceramic
Weight: 0.05

Stainless steel grease tray; has drip hole and includes grease cup and grease cup holder. Made in USA .

Replaces Dyna-Glo factory part# DYG-70-01-186

Part Number: CLA-DS0248
Dimensions: 15” x 28 9/16”
Material: stainless steel
Weight: 4.5

Oval lid heat indicator. Mounts to grill with single 1.25” long threaded temperature probe in center.

Replaces Dyna-Glo factory part# DYG-70-04-100

Part Number: 072-6800-0
Dimensions: 2 15/16” x 1 7/8”
Material: stainless steel
Weight: 0.2

10” Bamboo Skewers (100 pieces)

• Ideal for grilling meat and vegetables
• Soak skewers in water about 1/2 hour before using
• Use foods that require the same amount of cooking time. Meats can be pre-cooked. Marinated foods are recommended for added flavor.
• Great for chicken or beef, ham, lamb, or veal, salami, shrimp, or scallops, mushrooms, sliced peppers, omion, carrots, cherrytomatoes, pineapples, zuccini, and apples.

Part Number: 11060
Weight: 0.6

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.

Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7