Dyna-Glo DGF486GRP-D

105-13011-R Main Burners. SET OF THREE (3). Stainless steel. Fits Dyna-Glo DGE486, DGE530, DGF486, DGF530 and M486 series grills. May fit other models.

This part replaces original Dyna-Glo burner # 105-13011.

Part Number: DG1-105-13011-R-X3
Dimensions: 16 15/16” x 1”
Material: stainless steel
Weight: 1.5

105-13011-R Main Burner. Stainless steel. Fits Dyna-Glo DGE486, DGE530, DGF486, DGF530 and M486 series grills. May fit other models.

This part replaces original Dyna-Glo burner # 105-13011.

Part Number: DG1-105-13011-R
Dimensions: 16 15/16” x 1”
Material: stainless steel
Weight: 0.5

stainless steel burner for Dyna-Glo model DGF486GRP-D.

Replaces Dyna-Glo factory part# DYG-70-01-331

Part Number: 16351
Dimensions: 16 7/8” x 4 1/4”
Material: stainless steel
Weight: 1.0

166-13002-R-X3Cooking Grate. Set of three (3) grates. Porcelain treated, matte finish cast iron grate. Sold individually.

Fits Dyna-Glo DGE486, DGF486, and M486 series grills. May fit other models.

This grate replaces original Dyna-Glo part 166-13002.

Part Number: DG2-166-13002-R-X3
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 8 3/4”
Material: cast iron
Weight: 12.1

166-13002-R Cooking Grate. Porcelain treated, matte finish cast iron grates. Sold as a 3-piece set.

Fits Dyna-Glo DGE486, DGF486, and M486 series grills. May fit other models.

This grate replaces original Dyna-Glo part 166-13002.

Part Number: DG1-166-13002-R
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 26 5/8”
Material: cast iron
Weight: 10.10

105-13003-R Heat tents. Porcelain enameled steel. SET OF THREE (3).

Fits Dyna-Glo DGE486, DGE530, DGF486, and M486 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 105-13003.

Part Number: DG1-105-13003-R-X3
Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: porcelain steel
Weight: 2.0

105-13003-R Heat tent. Porcelain enameled steel. Sold individually.

Fits Dyna-Glo DGE486, DGE530, DGF486, and M486 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 105-13003.

Part Number: DG1-105-13003-R
Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: porcelain steel
Weight: 1.0

Stainless steel Heat Tent for Sear Burner for Dyna-Glo model DGF486GRP-D.

Replaces Dyna-Glo factory part# DYG-70-01-330

Part Number: 93671
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 5 1/4”
Material: stainless steel
Weight: 1.0

105-13012-R Ignition electrode and ignition wire assembly. Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGE486, DGE530 and M486 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 105-13012 (long wire) and 105-13017 (short wire).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-105-13012-R
Material: ceramic
Weight: 0.1

DG1-166-13007-R Electronic Ignitor. Battery powered push button ignitor. Fits Dyna-Glo DGE486, DGF486, and M486 series grills. May fit other models.

• 1.5 volt
• Has five (5) outlets (male spade connector)
• Uses a single AAA battery (not included))
• Requires 3/4” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”.

This Electronic Ignition Module replaces original Dyna-Glo part 166-13007.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-166-13007-R
Weight: 0.7

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1