Dyna-Glo DGB390BNP

104-13011-R-X3 Main Burner.. Set of three (3). Stainless steel. Fits Dyna-Glo DGB390, DGB730, and M365 series grills including:

• DGB390BNP
• DGB390SNP
• DGB730SNB
• M365 Series

May fit other models.

This part replaces original Dyna-Glo burner # 104-13011.

Part Number: DG1-104-13011-R-X3
Dimensions: 16 3/8” x 1”
Material: stainless steel
Weight: 0.5

104-13011-R Main Burner. Stainless steel. Fits Dyna-Glo DGB390, DGB730, and M365 series grills including:

• DGB390BNP
• DGB390SNP
• DGB730SNB
• M365 Series

May fit other models.

This part replaces original Dyna-Glo burner # 104-13011.

Part Number: DG1-104-13011-R
Dimensions: 16 3/8” x 1”
Material: stainless steel
Weight: 0.5

104-13003-R-X3 Heat tent. Set of three (3). Porcelain enameled steel.

Fits Dyna-Glo DGB390 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 104-13003.

Part Number: DG1-104-13003-R-X3
Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: porcelain steel
Weight: 1.0

104-13003-R Heat tent. Porcelain enameled steel. Sold individually.

Fits Dyna-Glo DGB390 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 104-13003.

Part Number: DG1-104-13003-R
Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: porcelain steel
Weight: 1.0

104-13007-R Electronic ignition. Three-outlet battery powered push button ignitor. Fits Dyna-Glo DGB390 series grills. May fit other models.

• 1.5 volt
• Has three (3) terminals (male spade connector)
• Uses a single AAA battery (not included)
• Requires 3/4” mounting hole

This Electronic Ignition Module replaces original Dyna-Glo part 104-13007.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-104-13007-R
Dimensions: 2 9/16” x 2”
Weight: 0.5

104-13012-R-X3 Ignition electrode and ignition wire assembly. Set of three (3). Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGB390 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 104-13012.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-104-13012-R-X3
Material: ceramic
Weight: 0.1

104-13012-R Ignition electrode and ignition wire assembly. Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGB390 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 104-13012.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-104-13012-R
Material: ceramic
Weight: 0.1

Push-button electronic igniter with three (3) spade connectors. Comes with sliver or black cap per availability. Needs (1) AA battery (not included); requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG3007
Weight: 0.2

Universal premium quality stainless steel warming rack. You simply can't buy a better quality warming rack than this, which weighs in at almost 5lbs of solid 304 grade stainless steel. This super heavy-duty warming rack was made to replace the porcelain coated steel racks found on BBQ grills made by The Great Outdoors Grill Company, but can be used in many other different grills.

• Far superior to the original porcelain coated steel rack
• Rests on your existing cooking grids.
• Solid 1/4” 304 stainless steel rods.
• Stands 3.75 inches tall.
• Made in USA .

WARNING: Before ordering this universal rack, please verify your grill has enough space to accommodate it. If you need to return, you will be responsible for return shipping, and the original out bound shipping fee will be deducted from the refund. What's required?

• Your grill needs to be at least 24” wide on the inside . The warming rack is 6.25” front to back and stands 3.75” tall.
• Notice the shape of the warming rack. Determine if the lid of your grill can easily close with the warming rack inside along with food placed on top of the rack.
  
  Part Number: CLA-WS0040
  Dimensions: 6 1/4” x 22 7/8”
  Material: stainless steel
  Weight: 4.8

Round heat indicator.

• Single probe
• 3” diameter
• Requires 3/8” mounting hole

Replaces Dyna-Glo factory part# DYG-104-12005

Part Number: 00016
Dimensions: 3” x 3”
Weight: 0.2

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Cast aluminum griddle

Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0

Deluxe venturi brush with 11” coil spring flexible shaft

Part Number: 77310
Weight: 0.3