Dyna-Glo DGA480BSP

113-03003-R-X4 Main Burner. Set of four (4). Stainless steel. Fits Dyna-Glo DGA480 series grills including:

• DGA480BSP
• DGA480SSP
• DGA550SSP

May fit other models.

This part replaces original Dyna-Glo burner # 113-03003.

Part Number: DG1-113-03003-R-X4
Dimensions: 16 3/8” x 1”
Material: stainless steel
Weight: 2.1

113-03003-R Main Burner. Stainless steel. Fits Dyna-Glo DGA480 series grills including:

• DGA480BSP
• DGA480SSP
• DGA550SSP

May fit other models.

This part replaces original Dyna-Glo burner # 113-03003.

Part Number: DG1-113-03003-R
Dimensions: 16 3/8” x 1”
Material: stainless steel
Weight: 0.5

113-03015-R Cooking Grate set. Porcelain enamel glossy finish cast iron grates. The 480 series grills originally came with two 13” grates, which are no longer available. This three (3) piece replacement set is the same total width as two of the originals.

Fits Dyna-Glo DGA480 series grills. May fit other models.

This grate set replaces two (2) of original Dyna-Glo part 113-03015.

Part Number: DG1-113-03015-R
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 26 1/4”
Material: glossy cast iron
Weight: 10.5

113-03005-R-X4 Heat tent. Porcelain enameled steel. Set of four..

Fits Dyna-Glo DGA480 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 113-03005.

Part Number: DG1-113-03005-R-X4
Dimension Front-to-Back: 15 9/16”
Dimension Side-to-Side: 5”
Material: porcelain steel
Weight: 1.0

113-03005-R Heat tent. Porcelain enameled steel. Sold individually.

Fits Dyna-Glo DGA480 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 113-03005.

Part Number: DG1-113-03005-R
Dimension Front-to-Back: 15 9/16”
Dimension Side-to-Side: 5”
Material: porcelain steel
Weight: 1.0

Universal battery powered push button ignitor.

• 1.5 volt
• Has five (5) terminals (male spade connector)
• Uses a single AA battery (not included))
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Dyna-Glo factory part# DYG-113-03023

Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7

113-03020-R-X4 Ignition electrode and ignition wire assembly. Set of four (4). Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGA480 and DGA550 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo Electrode 113-03020 and Wire 113-03017.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-113-03020-R-X4
Material: ceramic
Weight: 0.1

113-03020-R Ignition electrode and ignition wire assembly. Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGA480 and DGA550 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo Electrode 113-03020 and Wire 113-03017.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-113-03020-R
Material: ceramic
Weight: 0.1

Universal premium quality stainless steel warming rack. You simply can't buy a better quality warming rack than this, which weighs in at almost 5lbs of solid 304 grade stainless steel. This super heavy-duty warming rack was made to replace the porcelain coated steel racks found on BBQ grills made by The Great Outdoors Grill Company, but can be used in many other different grills.

• Far superior to the original porcelain coated steel rack
• Rests on your existing cooking grids.
• Solid 1/4” 304 stainless steel rods.
• Stands 3.75 inches tall.
• Made in USA .

WARNING: Before ordering this universal rack, please verify your grill has enough space to accommodate it. If you need to return, you will be responsible for return shipping, and the original out bound shipping fee will be deducted from the refund. What's required?

• Your grill needs to be at least 24” wide on the inside . The warming rack is 6.25” front to back and stands 3.75” tall.
• Notice the shape of the warming rack. Determine if the lid of your grill can easily close with the warming rack inside along with food placed on top of the rack.
  
  Part Number: CLA-WS0040
  Dimensions: 6 1/4” x 22 7/8”
  Material: stainless steel
  Weight: 4.8

HOW TO GRILL The Complete Illustrated Book of Barbecue Techniques. Steve Raichlen presents a full-color, step-by-step technique book that gets to the core of the grilling experience by showing and telling exactly how it's done. With more than 1,000 photographs, if features over 100 techniques and recipes, from how to set up a three-zone fire to how to grill a perfect prime rib, to grilling pizza, shellfish, vegetables, tofu, fruit, and s'mores.

Part Number: 0-7611-2014-9
Dimensions: 8” x 9 1/4”
Material: Paperback
Weight: 3.0

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Aluminum foil grilling trays. Package of three.

• Heavy duty aluminum foil
• Re-usable
• Great for grilling delicate foods like fish and veggies

Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1