Ducane 30400040 (Stainless)

304 Stainless steel Infrared rear rotisserie burner with ceramic wafer. For use with both liquid propane (LP) and natural gas grills. 8,000 BTU. Orifice not included. Use old orifice or purchase our orifice part# CLA-VB0245 for LP, or part# CLA-VB0246 for natural gas applications.

Dimensions:

• Maximum overall length, including mounting tab on one end: 17”
• Maximum width: 3 3/8”
• Burner box 15 3/8” x 3 3/8”
• Mounting holes: 16 1/8” on center

Part Number: CLA-BL0229
Dimensions: 3 3/8” x 17”
Material: stainless steel and ceramic
Weight: 3.0

Premium 304 commercial grade stainless steel tube burners. SET OF THREE (3). Fits Ducane 3-Burner Stainless and Meridian series grills. May fit others.

Part Number: CLA-BS0198-X3
Dimensions: 17” x 1”
Material: stainless steel
Weight: 1.2

Premium 304 commercial grade stainless steel tube burner. Fits Ducane Stainless and Meridian series grills. May fit others. Sold individually, number required varies by grill.

Part Number: CLA-BS0198
Dimensions: 17” x 1”
Material: stainless steel
Weight: 0.4

Cast Iron Cooking Grid - Ducane, Meridian, JennAir for Ducane model 30400040.

Part Number: CG-75P-CI
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 12”
Material: cast iron
Weight: 7.95

Premium stainless steel cooking grids. SET OF TWO (2) grids. Our USA-made premium stainless grids are simply the best obtainable. We have them manufactured here in the USA to our specifications and standards, which are high. Of course, they're not available anywhere else.

Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or coated carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best, you've found it. Just look at the weight of one of these grids, over 6 pounds of solid stainless each.

• Made in USA
• Commercial grade 304 stainless steel
• 5/16” solid stainless rods
• Sold as a set of two (2) panels

Each panel measures:

• Front-to-Back: 19 1/4”
• Side-to-Side: 12”

Total Side-to-Side: 24"

Part Number: CLA-GS0004-X2
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 24”
Material: stainless steel
Weight: 16.9

Premium quality heavy duty stainless steel cooking grid. Our USA-made premium stainless grids are simply the best obtainable. We have them manufactured here in the USA to our specifications and standards, which are high. Of course, they're not available anywhere else.

Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or coated carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best, you've found it. Just look at the weight of one of these grids, over 8 pounds of solid stainless each.

• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods
• Made in USA .
• Sold individually.

See part CLA-GS0004-X2 for a more economical 2-pack.

Part Number: CLA-GS0004
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 12”
Material: stainless steel
Weight: 8.5

Cast Iron Cooking Grids. TWO (2) PIECE SET. FIts Ducane, Meridian, JennAir.

Each panel measures 19 1/4” X 12”. Total width is 24".

Part Number: CG-75P-CI-X2
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 12”
Material: cast iron
Weight: 15.90

Stainless steel Flame Tamers. SET OF THREE (3). Fits Ducane 3-burner stainless models sold at Home Depot and elsewhere. May fit other models. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0011-X3
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 6 7/8”
Material: stainless steel
Weight: 3.6

Stainless steel Flame Tamer. Fits Ducane 3-burner stainless models sold at Home Depot and elsewhere. Made in USA . Sold individually.

Also available in 3-packs.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0011
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 6 7/8”
Material: stainless steel
Weight: 1.2

Stainless Steel Tank Heat Shield. Made in USA

Part Number: CLA-MS0313
Dimensions: 13 11/16” x 13 1/2”
Material: Stainless Steel
Weight: 1.8

Single Output Igniton Module. Fits many brands. Uses 1 AAA battery (not included).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB15-B
Weight: 0.20

Universal 2 5/16” knob.

• Selectable D-Value
• Selectable socket diameter - 6mm or 8mm.
• Selectable shaft length - flush, 1/4”, or 1 5/8”. Shafts can also be trimmed to desired length.
• Includes 6 shaft inserts and set screw.
• Fits any grill with inside bezel diameter greater than 2 5/16” (the knob diameter).

Part Number: 02342
Dimensions: 2 5/16” x 2 5/16”
Material: plastic
Weight: 0.20

#63 orifice for infrared burner CLA-BL0229; use on liquid propane (LP) gas grills. Includes brass elbow with 1/4” compression fitting.

Part Number: CLA-VB0245
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

#55 orifice for infrared burners use on natural Gas grills. Includes brass elbow with 1/4” compression fitting.

Part Number: CLA-VB0246
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

Skewers for part 92339 kebob tray.

Part Number: 11040
Weight: 0.4

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Aluminum foil grilling trays. Package of three.

• Heavy duty aluminum foil
• Re-usable
• Great for grilling delicate foods like fish and veggies

Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4

Deluxe venturi brush with 11” coil spring flexible shaft

Part Number: 77310
Weight: 0.3