Ducane 3002

U burner support bracket. Replaces OEM# 20175501. Sold indivually. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0057
Material: stainless steel
Weight: 0.05

C burner support bracket. Replaces OEM# G4162359. Sold indivually. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0058
Material: stainless steel
Weight: 0.05

Stainless steel burner kit. Includes left-hand P burner 123L1, 03758 electrode, wire, and collector box.

Part Number: 12011
Dimensions: 13 5/8” x 6 5/8”
Material: stainless steel
Weight: 1.0

Stainless steel burner kit. Includes right-hand P burner 123R1, 03758 electrode, wire, and collector box.
TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive mid Nov.

Part Number: 12021
Dimensions: 13 5/8” x 6 5/8”
Material: stainless steel
Weight: 1.0

Stainless steel P style burner, left-hand for Ducane model 3002.

Part Number: 123L1
Dimensions: 13 5/8” x 6 5/8”
Material: stainless steel
Weight: 1.1

Stainless steel P style burner, right-hand for Ducane model 3002.
TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive mid Nov.

Part Number: 123R1
Dimensions: 13 5/8” x 6 5/8”
Material: stainless steel
Weight: 1.1

Chrome plated cooking grid. Made in USA .

Part Number: CG-6
Dimension Front-to-Back: 13 3/4”
Dimension Side-to-Side: 20”
Material: Chrome steel
Weight: 2.9

Porcelain coated cooking grid for Ducane model 3002.

Part Number: 51362
Dimension Front-to-Back: 14 3/4”
Dimension Side-to-Side: 20 1/2”
Material: porcelain steel wire
Weight: 4.6

2017220X Ducane Pyromid® briquettes. Bag of 59 high quality pyromid-shaped, flat-top ceramic pieces. These are the same OEM factory briquettes that came with your new Ducane grill

Fits Ducane 2000, 3000, 4000 series grills, and all models using La-Va-Grate part# G413472.

Part Number: 2017220X
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.65

25” wire with female spade connector on one end, and female round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is round connector to electrode, spade (flat) connector to igniter.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03400
Weight: 0.1

Collector box, ceramic electrode, glow wire spring, and 23” wire with female round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03758
Material: ceramic
Weight: 0.2

Black control knob.

• Off position D-Value: 12 o'clock
• Knob diameter: 1 15/16”
• Socket diameter: 8mm
• Knob shaft: 3/4”

Part Number: 03203
Dimensions: 1 15/16” x 1 15/16”
Material: plastic
Weight: 0.1

Universal durable black phenolic lid handle with threaded brass insert. (1/4” x 20 thread). Includes mounting bolt and lockwasher. Made for Ducane but makes a great universal lid handle that can be used on almost any grill.

Part Number: PH-2B
Dimensions: 3 1/2
Material: 6.59
Weight: .3

Natural gas brass valve. Replaces Ducane OEM part #G1827575, others. Orifice not included. Use original orifice or our part #37900 drilled to size.

Part Number: 37700
Dimensions: 2 11/16” x 1 7/8”
Material: brass
Weight: 0.3

LP brass valve. Replaces Ducane OEM LP gas valve part# G1827566, others. Orifice not included. Use original orifice or our part #37900 drilled to size.

Part Number: 37800
Dimensions: 2 11/16” x 1 7/8”
Material: brass
Weight: 0.3

Brass hood orifice with #72 starter hole and 1/8” x 22 threading for use with valves 37700, 37800, and 38800. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 37900
Dimensions: 0 3/4” x 0 1/2”
Material: brass
Weight: 0.1

Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.

Part Number: 45887
Material: pummise
Weight: 7.0

Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

High quality, long lasting ceramic briquettes. 70 flat top pyramid-shaped briquettes per box. Placed 1/2” apart, 70 briquetes will cover about 437 square inches. This is an area roughly 17” x 26”.

• Top quality product
• Each briquette measure 2” x 2”
• Self cleaning
• Great heat distibution, retains heat longer
• Can be used on all grills that use briquettes or lava rock
• Use a single layer (multiple layers can reduce temperatures)

NOTE: These high quality ceramic briquetes are available in 59 count, 70 count, and 90 count qantities.

• 59 briquetes covers an area apprimately 15” x 24”
• 70 briquetes covers an area apprimately 17” x 26”
• 90 briquetes covers an area apprimately 17” x 33”

Made in USA

Part Number: CLA-AC0399
Dimensions: 2” x 2”
Material: ceramic
Weight: 9.75

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Material: chrome steel
Weight: 0.9

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Upright porcelain steel roasting rack with grid topper.

Part Number: 40935
Weight: 2.9

deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.

Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7