Ducane 1505SHLPE

U burner support bracket. Replaces OEM# 20175501. Sold indivually. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0057
Material: stainless steel
Weight: 0.05

C burner support bracket. Replaces OEM# G4162359. Sold indivually. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0058
Material: stainless steel
Weight: 0.05

Stainless steel S style burner, left-hand for Ducane model 1505SHLPE.

Part Number: 124L1
Dimensions: 14 3/4” x 9 3/4”
Material: stainless steel
Weight: 1.9

Stainless steel S style burner, right-hand for Ducane model 1505SHLPE.

Part Number: 124R1
Dimensions: 14 3/4” x 9 3/4”
Material: stainless steel
Weight: 1.9

Stainless steel burner kit. Includes left-hand S burner 124L1, 03758 electrode, wire, and collector box.

Part Number: 13011
Dimensions: 14 3/4” x 9 3/4”
Material: stainless steel
Weight: 1.5

Stainless steel burner kit. Includes right-hand S burner 124R1, 03758 electrode, wire, and collector box.

Part Number: 13021
Dimensions: 14 3/4” x 9 3/4”
Material: stainless steel
Weight: 1.5

Stainless steel Sear Grid set. Replaces Ducane OEM part 20172302.

The stainless steel SEAR GRID is a 2-piece die formed part with domed runners. Each runner traps and collects the heat of the briquettes thus making your grill 30% more effective than other cooking grids. The trapped heat within each runner produces wide sear marks on the meat, thus sealing in the meat’s juices.

The SEAR GRID is made of a high quality stainless steel. Due to the heat of cooking, a discoloration of the SEAR GRID is normal and will not affect the SEAR GRID in any manner.

Part Number: 534S2
Dimension Front-to-Back: 16 1/4”
Dimension Side-to-Side: 24 1/4”
Material: stamped stainless steel
Weight: 4.15

Rotary piezo spark generator. Two round connector leads send spark to both main burners. For use with Ducane models without rotisserie burners.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03220
Weight: 0.2

25” wire with female spade connector on one end, and female round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is round connector to electrode, spade (flat) connector to igniter.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03400
Weight: 0.1

Collector box, ceramic electrode, glow wire spring, and 23” wire with female round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03758
Material: ceramic
Weight: 0.2

Black knob for rotary igniters for Ducane model 1505SHLPE.

Part Number: 03201
Weight: 0.1

Black control knob.

• Off position D-Value: 12 o'clock
• Knob diameter: 1 15/16”
• Socket diameter: 8mm
• Knob shaft: 3/4”

Part Number: 03203
Dimensions: 1 15/16” x 1 15/16”
Material: plastic
Weight: 0.1

Universal durable black phenolic lid handle with threaded brass insert. (1/4” x 20 thread). Includes mounting bolt and lockwasher. Made for Ducane but makes a great universal lid handle that can be used on almost any grill.

Part Number: PH-2B
Dimensions: 3 1/2
Material: 6.59
Weight: .3

LP brass valve. Replaces Ducane OEM LP gas valve part# G1827566, others. Orifice not included. Use original orifice or our part #37900 drilled to size.

Part Number: 37800
Dimensions: 2 11/16” x 1 7/8”
Material: brass
Weight: 0.3

Brass hood orifice with #72 starter hole and 1/8” x 22 threading for use with valves 37700, 37800, and 38800. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 37900
Dimensions: 0 3/4” x 0 1/2”
Material: brass
Weight: 0.1

Texas hickory flavor wood chips. 800g.

Part Number: 00220
Weight: 2.0

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

economy basting brushes. Two brushes, 7.5” long.

Part Number: 43054
Weight: 0.1

Aluminum foil grilling trays. Package of three.

• Heavy duty aluminum foil
• Re-usable
• Great for grilling delicate foods like fish and veggies

Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4

Grill Mitt With Neoprene Palm.

16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most

Part Number: 90963
Weight: 0.5